From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 drivers/video/kyro/fbdev.c | 810 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 810 insertions(+)
 create mode 100644 drivers/video/kyro/fbdev.c

(limited to 'drivers/video/kyro/fbdev.c')

diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/kyro/fbdev.c
new file mode 100644
index 00000000..ec7fc87f
--- /dev/null
+++ b/drivers/video/kyro/fbdev.c
@@ -0,0 +1,810 @@
+/*
+ *  linux/drivers/video/kyro/fbdev.c
+ *
+ *  Copyright (C) 2002 STMicroelectronics
+ *  Copyright (C) 2003, 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include <video/kyro.h>
+
+#include "STG4000Reg.h"
+#include "STG4000Interface.h"
+
+/*
+ * PCI Definitions
+ */
+#define PCI_VENDOR_ID_ST	0x104a
+#define PCI_DEVICE_ID_STG4000	0x0010
+
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+/****************************************************************************/
+static struct fb_fix_screeninfo kyro_fix = {
+	.id		= "ST Kyro",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo kyro_var = {
+	/* 640x480, 16bpp @ 60 Hz */
+	.xres		= 640,
+	.yres		= 480,
+	.xres_virtual	= 640,
+	.yres_virtual	= 480,
+	.bits_per_pixel	= 16,
+	.red		= { 11, 5, 0 },
+	.green		= {  5, 6, 0 },
+	.blue		= {  0, 5, 0 },
+	.activate	= FB_ACTIVATE_NOW,
+	.height		= -1,
+	.width		= -1,
+	.pixclock	= KHZ2PICOS(25175),
+	.left_margin	= 48,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 96,
+	.vsync_len	= 2,
+	.vmode		= FB_VMODE_NONINTERLACED,
+};
+
+typedef struct {
+	STG4000REG __iomem *pSTGReg;	/* Virtual address of PCI register region */
+	u32 ulNextFreeVidMem;	/* Offset from start of vid mem to next free region */
+	u32 ulOverlayOffset;	/* Offset from start of vid mem to overlay */
+	u32 ulOverlayStride;	/* Interleaved YUV and 422 mode Y stride */
+	u32 ulOverlayUVStride;	/* 422 mode U & V stride */
+} device_info_t;
+
+/* global graphics card info structure (one per card) */
+static device_info_t deviceInfo;
+
+static char *mode_option = NULL;
+static int nopan = 0;
+static int nowrap = 1;
+#ifdef CONFIG_MTRR
+static int nomtrr = 0;
+#endif
+
+/* PCI driver prototypes */
+static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void kyrofb_remove(struct pci_dev *pdev);
+
+static struct fb_videomode kyro_modedb[] = {
+	{
+		/* 640x350 @ 85Hz */
+		NULL, 85, 640, 350, KHZ2PICOS(31500),
+		96, 32, 60, 32, 64, 3,
+		FB_SYNC_HOR_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 640x400 @ 85Hz */
+		NULL, 85, 640, 400, KHZ2PICOS(31500),
+		96, 32, 41, 1, 64, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 720x400 @ 85Hz */
+		NULL, 85, 720, 400, KHZ2PICOS(35500),
+		108, 36, 42, 1, 72, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 640x480 @ 60Hz */
+		NULL, 60, 640, 480, KHZ2PICOS(25175),
+		48, 16, 33, 10, 96, 2,
+		0, FB_VMODE_NONINTERLACED
+	}, {
+		/* 640x480 @ 72Hz */
+		NULL, 72, 640, 480, KHZ2PICOS(31500),
+		128, 24, 28, 9, 40, 3,
+		0, FB_VMODE_NONINTERLACED
+	}, {
+		/* 640x480 @ 75Hz */
+		NULL, 75, 640, 480, KHZ2PICOS(31500),
+		120, 16, 16, 1, 64, 3,
+		0, FB_VMODE_NONINTERLACED
+	}, {
+		/* 640x480 @ 85Hz */
+		NULL, 85, 640, 480, KHZ2PICOS(36000),
+		80, 56, 25, 1, 56, 3,
+		0, FB_VMODE_NONINTERLACED
+	}, {
+		/* 800x600 @ 56Hz */
+		NULL, 56, 800, 600, KHZ2PICOS(36000),
+		128, 24, 22, 1, 72, 2,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 800x600 @ 60Hz */
+		NULL, 60, 800, 600, KHZ2PICOS(40000),
+		88, 40, 23, 1, 128, 4,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 800x600 @ 72Hz */
+		NULL, 72, 800, 600, KHZ2PICOS(50000),
+		64, 56, 23, 37, 120, 6,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 800x600 @ 75Hz */
+		NULL, 75, 800, 600, KHZ2PICOS(49500),
+		160, 16, 21, 1, 80, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 800x600 @ 85Hz */
+		NULL, 85, 800, 600, KHZ2PICOS(56250),
+		152, 32, 27, 1, 64, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1024x768 @ 60Hz */
+		NULL, 60, 1024, 768, KHZ2PICOS(65000),
+		160, 24, 29, 3, 136, 6,
+		0, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1024x768 @ 70Hz */
+		NULL, 70, 1024, 768, KHZ2PICOS(75000),
+		144, 24, 29, 3, 136, 6,
+		0, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1024x768 @ 75Hz */
+		NULL, 75, 1024, 768, KHZ2PICOS(78750),
+		176, 16, 28, 1, 96, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1024x768 @ 85Hz */
+		NULL, 85, 1024, 768, KHZ2PICOS(94500),
+		208, 48, 36, 1, 96, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1152x864 @ 75Hz */
+		NULL, 75, 1152, 864, KHZ2PICOS(108000),
+		256, 64, 32, 1, 128, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1280x960 @ 60Hz */
+		NULL, 60, 1280, 960, KHZ2PICOS(108000),
+		312, 96, 36, 1, 112, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1280x960 @ 85Hz */
+		NULL, 85, 1280, 960, KHZ2PICOS(148500),
+		224, 64, 47, 1, 160, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1280x1024 @ 60Hz */
+		NULL, 60, 1280, 1024, KHZ2PICOS(108000),
+		248, 48, 38, 1, 112, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1280x1024 @ 75Hz */
+		NULL, 75, 1280, 1024, KHZ2PICOS(135000),
+		248, 16, 38, 1, 144, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1280x1024 @ 85Hz */
+		NULL, 85, 1280, 1024, KHZ2PICOS(157500),
+		224, 64, 44, 1, 160, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1600x1200 @ 60Hz */
+		NULL, 60, 1600, 1200, KHZ2PICOS(162000),
+		304, 64, 46, 1, 192, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1600x1200 @ 65Hz */
+		NULL, 65, 1600, 1200, KHZ2PICOS(175500),
+		304, 64, 46, 1, 192, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1600x1200 @ 70Hz */
+		NULL, 70, 1600, 1200, KHZ2PICOS(189000),
+		304, 64, 46, 1, 192, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1600x1200 @ 75Hz */
+		NULL, 75, 1600, 1200, KHZ2PICOS(202500),
+		304, 64, 46, 1, 192, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1600x1200 @ 85Hz */
+		NULL, 85, 1600, 1200, KHZ2PICOS(229500),
+		304, 64, 46, 1, 192, 3,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1792x1344 @ 60Hz */
+		NULL, 60, 1792, 1344, KHZ2PICOS(204750),
+		328, 128, 46, 1, 200, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1792x1344 @ 75Hz */
+		NULL, 75, 1792, 1344, KHZ2PICOS(261000),
+		352, 96, 69, 1, 216, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1856x1392 @ 60Hz */
+		NULL, 60, 1856, 1392, KHZ2PICOS(218250),
+		352, 96, 43, 1, 224, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1856x1392 @ 75Hz */
+		NULL, 75, 1856, 1392, KHZ2PICOS(288000),
+		352, 128, 104, 1, 224, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1920x1440 @ 60Hz */
+		NULL, 60, 1920, 1440, KHZ2PICOS(234000),
+		344, 128, 56, 1, 208, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	}, {
+		/* 1920x1440 @ 75Hz */
+		NULL, 75, 1920, 1440, KHZ2PICOS(297000),
+		352, 144, 56, 1, 224, 3,
+		FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
+	},
+};
+#define NUM_TOTAL_MODES	ARRAY_SIZE(kyro_modedb)
+
+/*
+ * This needs to be kept ordered corresponding to kyro_modedb.
+ */
+enum {
+	VMODE_640_350_85,
+	VMODE_640_400_85,
+	VMODE_720_400_85,
+	VMODE_640_480_60,
+	VMODE_640_480_72,
+	VMODE_640_480_75,
+	VMODE_640_480_85,
+	VMODE_800_600_56,
+	VMODE_800_600_60,
+	VMODE_800_600_72,
+	VMODE_800_600_75,
+	VMODE_800_600_85,
+	VMODE_1024_768_60,
+	VMODE_1024_768_70,
+	VMODE_1024_768_75,
+	VMODE_1024_768_85,
+	VMODE_1152_864_75,
+	VMODE_1280_960_60,
+	VMODE_1280_960_85,
+	VMODE_1280_1024_60,
+	VMODE_1280_1024_75,
+	VMODE_1280_1024_85,
+	VMODE_1600_1200_60,
+	VMODE_1600_1200_65,
+	VMODE_1600_1200_70,
+	VMODE_1600_1200_75,
+	VMODE_1600_1200_85,
+	VMODE_1792_1344_60,
+	VMODE_1792_1344_75,
+	VMODE_1856_1392_60,
+	VMODE_1856_1392_75,
+	VMODE_1920_1440_60,
+	VMODE_1920_1440_75,
+};
+
+/* Accessors */
+static int kyro_dev_video_mode_set(struct fb_info *info)
+{
+	struct kyrofb_info *par = info->par;
+
+	/* Turn off display */
+	StopVTG(deviceInfo.pSTGReg);
+	DisableRamdacOutput(deviceInfo.pSTGReg);
+
+	/* Bring us out of VGA and into Hi-Res mode, if not already. */
+	DisableVGA(deviceInfo.pSTGReg);
+
+	if (InitialiseRamdac(deviceInfo.pSTGReg,
+			     info->var.bits_per_pixel,
+			     info->var.xres, info->var.yres,
+			     par->HSP, par->VSP, &par->PIXCLK) < 0)
+		return -EINVAL;
+
+	SetupVTG(deviceInfo.pSTGReg, par);
+
+	ResetOverlayRegisters(deviceInfo.pSTGReg);
+
+	/* Turn on display in new mode */
+	EnableRamdacOutput(deviceInfo.pSTGReg);
+	StartVTG(deviceInfo.pSTGReg);
+
+	deviceInfo.ulNextFreeVidMem = info->var.xres * info->var.yres *
+				      info->var.bits_per_pixel;
+	deviceInfo.ulOverlayOffset = 0;
+
+	return 0;
+}
+
+static int kyro_dev_overlay_create(u32 ulWidth,
+				   u32 ulHeight, int bLinear)
+{
+	u32 offset;
+	u32 stride, uvStride;
+
+	if (deviceInfo.ulOverlayOffset != 0)
+		/*
+		 * Can only create one overlay without resetting the card or
+		 * changing display mode
+		 */
+		return -EINVAL;
+
+	ResetOverlayRegisters(deviceInfo.pSTGReg);
+
+	/* Overlays are addressed in multiples of 16bytes or 32bytes, so make
+	 * sure the start offset is on an appropriate boundary.
+	 */
+	offset = deviceInfo.ulNextFreeVidMem;
+	if ((offset & 0x1f) != 0) {
+		offset = (offset + 32L) & 0xffffffE0L;
+	}
+
+	if (CreateOverlaySurface(deviceInfo.pSTGReg, ulWidth, ulHeight,
+				 bLinear, offset, &stride, &uvStride) < 0)
+		return -EINVAL;
+
+	deviceInfo.ulOverlayOffset = offset;
+	deviceInfo.ulOverlayStride = stride;
+	deviceInfo.ulOverlayUVStride = uvStride;
+	deviceInfo.ulNextFreeVidMem = offset + (ulHeight * stride) + (ulHeight * 2 * uvStride);
+
+	SetOverlayBlendMode(deviceInfo.pSTGReg, GLOBAL_ALPHA, 0xf, 0x0);
+
+	return 0;
+}
+
+static int kyro_dev_overlay_viewport_set(u32 x, u32 y, u32 ulWidth, u32 ulHeight)
+{
+	if (deviceInfo.ulOverlayOffset == 0)
+		/* probably haven't called CreateOverlay yet */
+		return -EINVAL;
+
+	/* Stop Ramdac Output */
+	DisableRamdacOutput(deviceInfo.pSTGReg);
+
+	SetOverlayViewPort(deviceInfo.pSTGReg,
+			   x, y, x + ulWidth - 1, y + ulHeight - 1);
+
+	EnableOverlayPlane(deviceInfo.pSTGReg);
+	/* Start Ramdac Output */
+	EnableRamdacOutput(deviceInfo.pSTGReg);
+
+	return 0;
+}
+
+static inline unsigned long get_line_length(int x, int bpp)
+{
+	return (unsigned long)((((x*bpp)+31)&~31) >> 3);
+}
+
+static int kyrofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct kyrofb_info *par = info->par;
+
+	if (var->bits_per_pixel != 16 && var->bits_per_pixel != 32) {
+		printk(KERN_WARNING "kyrofb: depth not supported: %u\n", var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.length = 5;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 8;
+		break;
+	}
+
+	/* Height/Width of picture in mm */
+	var->height = var->width = -1;
+
+	/* Timing information. All values are in picoseconds */
+
+	/* par->PIXCLK is in 100Hz units. Convert to picoseconds -
+	 * ensuring we do not exceed 32 bit precision
+	 */
+	/*
+	 * XXX: Enabling this really screws over the pixclock value when we
+	 * read it back with fbset. As such, leaving this commented out appears
+	 * to do the right thing (at least for now) .. bearing in mind that we
+	 * have infact already done the KHZ2PICOS conversion in both the modedb
+	 * and kyro_var. -- PFM.
+	 */
+//	var->pixclock = 1000000000 / (par->PIXCLK / 10);
+
+	/* the header file claims we should use picoseconds
+	 * - nobody else does though, the all use pixels and lines
+	 * of h and v sizes. Both options here.
+	 */
+
+	/*
+	 * If we're being called by __fb_try_mode(), then we don't want to
+	 * override any of the var settings that we've already parsed
+	 * from our modedb. -- PFM.
+	 */
+	if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_TEST)
+		return 0;
+
+	var->left_margin = par->HBP;
+	var->hsync_len = par->HST;
+	var->right_margin = par->HFP;
+
+	var->upper_margin = par->VBP;
+	var->vsync_len = par->VST;
+	var->lower_margin = par->VFP;
+
+	if (par->HSP == 1)
+		var->sync |= FB_SYNC_HOR_HIGH_ACT;
+	if (par->VSP == 1)
+		var->sync |= FB_SYNC_VERT_HIGH_ACT;
+
+	return 0;
+}
+
+static int kyrofb_set_par(struct fb_info *info)
+{
+	struct kyrofb_info *par = info->par;
+	unsigned long lineclock;
+	unsigned long frameclock;
+
+	/* Actual resolution */
+	par->XRES = info->var.xres;
+	par->YRES = info->var.yres;
+
+	/* pixel depth */
+	par->PIXDEPTH = info->var.bits_per_pixel;
+
+	/* Refresh rate */
+	/* time for a line in ns */
+	lineclock = (info->var.pixclock * (info->var.xres +
+				    info->var.right_margin +
+				    info->var.hsync_len +
+				    info->var.left_margin)) / 1000;
+
+
+	/* time for a frame in ns (precision in 32bpp) */
+	frameclock = lineclock * (info->var.yres +
+				  info->var.lower_margin +
+				  info->var.vsync_len +
+				  info->var.upper_margin);
+
+	/* Calculate refresh rate and horrizontal clocks */
+	par->VFREQ = (1000000000 + (frameclock / 2)) / frameclock;
+	par->HCLK = (1000000000 + (lineclock / 2)) / lineclock;
+	par->PIXCLK = ((1000000000 + (info->var.pixclock / 2))
+					/ info->var.pixclock) * 10;
+
+	/* calculate horizontal timings */
+	par->HFP = info->var.right_margin;
+	par->HST = info->var.hsync_len;
+	par->HBP = info->var.left_margin;
+	par->HTot = par->XRES + par->HBP + par->HST + par->HFP;
+
+	/* calculate vertical timings */
+	par->VFP = info->var.lower_margin;
+	par->VST = info->var.vsync_len;
+	par->VBP = info->var.upper_margin;
+	par->VTot = par->YRES + par->VBP + par->VST + par->VFP;
+
+	par->HSP = (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 1 : 0;
+	par->VSP = (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 1 : 0;
+
+	kyro_dev_video_mode_set(info);
+
+	/* length of a line in bytes    */
+	info->fix.line_length = get_line_length(par->XRES, par->PIXDEPTH);
+	info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+	return 0;
+}
+
+static int kyrofb_setcolreg(u_int regno, u_int red, u_int green,
+			    u_int blue, u_int transp, struct fb_info *info)
+{
+	struct kyrofb_info *par = info->par;
+
+	if (regno > 255)
+		return 1;	/* Invalid register */
+
+	if (regno < 16) {
+		switch (info->var.bits_per_pixel) {
+		case 16:
+			par->palette[regno] =
+			     (red   & 0xf800) |
+			    ((green & 0xfc00) >> 5) |
+			    ((blue  & 0xf800) >> 11);
+			break;
+		case 32:
+			red >>= 8; green >>= 8; blue >>= 8; transp >>= 8;
+			par->palette[regno] =
+			    (transp << 24) | (red << 16) | (green << 8) | blue;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+#ifndef MODULE
+static int __init kyrofb_setup(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ","))) {
+		if (!*this_opt)
+			continue;
+		if (strcmp(this_opt, "nopan") == 0) {
+			nopan = 1;
+		} else if (strcmp(this_opt, "nowrap") == 0) {
+			nowrap = 1;
+#ifdef CONFIG_MTRR
+		} else if (strcmp(this_opt, "nomtrr") == 0) {
+			nomtrr = 1;
+#endif
+		} else {
+			mode_option = this_opt;
+		}
+	}
+
+	return 0;
+}
+#endif
+
+static int kyrofb_ioctl(struct fb_info *info,
+			unsigned int cmd, unsigned long arg)
+{
+	overlay_create ol_create;
+	overlay_viewport_set ol_viewport_set;
+	void __user *argp = (void __user *)arg;
+
+	switch (cmd) {
+	case KYRO_IOCTL_OVERLAY_CREATE:
+		if (copy_from_user(&ol_create, argp, sizeof(overlay_create)))
+			return -EFAULT;
+
+		if (kyro_dev_overlay_create(ol_create.ulWidth,
+					    ol_create.ulHeight, 0) < 0) {
+			printk(KERN_ERR "Kyro FB: failed to create overlay surface.\n");
+
+			return -EINVAL;
+		}
+		break;
+	case KYRO_IOCTL_OVERLAY_VIEWPORT_SET:
+		if (copy_from_user(&ol_viewport_set, argp,
+			       sizeof(overlay_viewport_set)))
+			return -EFAULT;
+
+		if (kyro_dev_overlay_viewport_set(ol_viewport_set.xOrgin,
+						  ol_viewport_set.yOrgin,
+						  ol_viewport_set.xSize,
+						  ol_viewport_set.ySize) != 0)
+		{
+			printk(KERN_ERR "Kyro FB: failed to create overlay viewport.\n");
+			return -EINVAL;
+		}
+		break;
+	case KYRO_IOCTL_SET_VIDEO_MODE:
+		{
+			printk(KERN_ERR "Kyro FB: KYRO_IOCTL_SET_VIDEO_MODE is"
+				"obsolete, use the appropriate fb_ioctl()"
+				"command instead.\n");
+			return -EINVAL;
+		}
+		break;
+	case KYRO_IOCTL_UVSTRIDE:
+		if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(deviceInfo.ulOverlayUVStride)))
+			return -EFAULT;
+		break;
+	case KYRO_IOCTL_STRIDE:
+		if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(deviceInfo.ulOverlayStride)))
+			return -EFAULT;
+		break;
+	case KYRO_IOCTL_OVERLAY_OFFSET:
+		if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(deviceInfo.ulOverlayOffset)))
+			return -EFAULT;
+		break;
+	}
+
+	return 0;
+}
+
+static struct pci_device_id kyrofb_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ST, PCI_DEVICE_ID_STG4000,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, kyrofb_pci_tbl);
+
+static struct pci_driver kyrofb_pci_driver = {
+	.name		= "kyrofb",
+	.id_table	= kyrofb_pci_tbl,
+	.probe		= kyrofb_probe,
+	.remove		= kyrofb_remove,
+};
+
+static struct fb_ops kyrofb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= kyrofb_check_var,
+	.fb_set_par	= kyrofb_set_par,
+	.fb_setcolreg	= kyrofb_setcolreg,
+	.fb_ioctl	= kyrofb_ioctl,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct fb_info *info;
+	struct kyrofb_info *currentpar;
+	unsigned long size;
+	int err;
+
+	if ((err = pci_enable_device(pdev))) {
+		printk(KERN_WARNING "kyrofb: Can't enable pdev: %d\n", err);
+		return err;
+	}
+
+	info = framebuffer_alloc(sizeof(struct kyrofb_info), &pdev->dev);
+	if (!info)
+		return -ENOMEM;
+
+	currentpar = info->par;
+
+	kyro_fix.smem_start = pci_resource_start(pdev, 0);
+	kyro_fix.smem_len   = pci_resource_len(pdev, 0);
+	kyro_fix.mmio_start = pci_resource_start(pdev, 1);
+	kyro_fix.mmio_len   = pci_resource_len(pdev, 1);
+
+	currentpar->regbase = deviceInfo.pSTGReg =
+		ioremap_nocache(kyro_fix.mmio_start, kyro_fix.mmio_len);
+
+	info->screen_base = ioremap_nocache(kyro_fix.smem_start,
+					    kyro_fix.smem_len);
+
+#ifdef CONFIG_MTRR
+	if (!nomtrr)
+		currentpar->mtrr_handle =
+			mtrr_add(kyro_fix.smem_start,
+				 kyro_fix.smem_len,
+				 MTRR_TYPE_WRCOMB, 1);
+#endif
+
+	kyro_fix.ypanstep	= nopan ? 0 : 1;
+	kyro_fix.ywrapstep	= nowrap ? 0 : 1;
+
+	info->fbops		= &kyrofb_ops;
+	info->fix		= kyro_fix;
+	info->pseudo_palette	= currentpar->palette;
+	info->flags		= FBINFO_DEFAULT;
+
+	SetCoreClockPLL(deviceInfo.pSTGReg, pdev);
+
+	deviceInfo.ulNextFreeVidMem = 0;
+	deviceInfo.ulOverlayOffset = 0;
+
+	/* This should give a reasonable default video mode */
+	if (!fb_find_mode(&info->var, info, mode_option, kyro_modedb,
+			  NUM_TOTAL_MODES, &kyro_modedb[VMODE_1024_768_75], 32))
+		info->var = kyro_var;
+
+	fb_alloc_cmap(&info->cmap, 256, 0);
+
+	kyrofb_set_par(info);
+	kyrofb_check_var(&info->var, info);
+
+	size = get_line_length(info->var.xres_virtual,
+			       info->var.bits_per_pixel);
+	size *= info->var.yres_virtual;
+
+	fb_memset(info->screen_base, 0, size);
+
+	if (register_framebuffer(info) < 0)
+		goto out_unmap;
+
+	printk("fb%d: %s frame buffer device, at %dx%d@%d using %ldk/%ldk of VRAM\n",
+	       info->node, info->fix.id, info->var.xres,
+	       info->var.yres, info->var.bits_per_pixel, size >> 10,
+	       (unsigned long)info->fix.smem_len >> 10);
+
+	pci_set_drvdata(pdev, info);
+
+	return 0;
+
+out_unmap:
+	iounmap(currentpar->regbase);
+	iounmap(info->screen_base);
+	framebuffer_release(info);
+
+	return -EINVAL;
+}
+
+static void kyrofb_remove(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct kyrofb_info *par = info->par;
+
+	/* Reset the board */
+	StopVTG(deviceInfo.pSTGReg);
+	DisableRamdacOutput(deviceInfo.pSTGReg);
+
+	/* Sync up the PLL */
+	SetCoreClockPLL(deviceInfo.pSTGReg, pdev);
+
+	deviceInfo.ulNextFreeVidMem = 0;
+	deviceInfo.ulOverlayOffset = 0;
+
+	iounmap(info->screen_base);
+	iounmap(par->regbase);
+
+#ifdef CONFIG_MTRR
+	if (par->mtrr_handle)
+		mtrr_del(par->mtrr_handle,
+			 info->fix.smem_start,
+			 info->fix.smem_len);
+#endif
+
+	unregister_framebuffer(info);
+	pci_set_drvdata(pdev, NULL);
+	framebuffer_release(info);
+}
+
+static int __init kyrofb_init(void)
+{
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("kyrofb", &option))
+		return -ENODEV;
+	kyrofb_setup(option);
+#endif
+	return pci_register_driver(&kyrofb_pci_driver);
+}
+
+static void __exit kyrofb_exit(void)
+{
+	pci_unregister_driver(&kyrofb_pci_driver);
+}
+
+module_init(kyrofb_init);
+
+#ifdef MODULE
+module_exit(kyrofb_exit);
+#endif
+
+MODULE_AUTHOR("STMicroelectronics; Paul Mundt <lethal@linux-sh.org>");
+MODULE_LICENSE("GPL");
-- 
cgit v1.3.1