From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 drivers/gpu/drm/cirrus/cirrus_mode.c | 631 +++++++++++++++++++++++++++++++++++
 1 file changed, 631 insertions(+)
 create mode 100644 drivers/gpu/drm/cirrus/cirrus_mode.c

(limited to 'drivers/gpu/drm/cirrus/cirrus_mode.c')

diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c
new file mode 100644
index 00000000..b86f68d8
--- /dev/null
+++ b/drivers/gpu/drm/cirrus/cirrus_mode.c
@@ -0,0 +1,631 @@
+
+/*
+ * Copyright 2012 Red Hat
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License version 2. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Authors: Matthew Garrett
+ *          Dave Airlie
+ *
+ * Portions of this code derived from cirrusfb.c:
+ * drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets
+ *
+ * Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com>
+ */
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+
+#include <video/cirrus.h>
+
+#include "cirrus_drv.h"
+
+#define CIRRUS_LUT_SIZE 256
+
+#define PALETTE_INDEX 0x8
+#define PALETTE_DATA 0x9
+
+/*
+ * This file contains setup code for the CRTC.
+ */
+
+static void cirrus_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct cirrus_device *cdev = dev->dev_private;
+	int i;
+
+	if (!crtc->enabled)
+		return;
+
+	for (i = 0; i < CIRRUS_LUT_SIZE; i++) {
+		/* VGA registers */
+		WREG8(PALETTE_INDEX, i);
+		WREG8(PALETTE_DATA, cirrus_crtc->lut_r[i]);
+		WREG8(PALETTE_DATA, cirrus_crtc->lut_g[i]);
+		WREG8(PALETTE_DATA, cirrus_crtc->lut_b[i]);
+	}
+}
+
+/*
+ * The DRM core requires DPMS functions, but they make little sense in our
+ * case and so are just stubs
+ */
+
+static void cirrus_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct cirrus_device *cdev = dev->dev_private;
+	u8 sr01, gr0e;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		sr01 = 0x00;
+		gr0e = 0x00;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		sr01 = 0x20;
+		gr0e = 0x02;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		sr01 = 0x20;
+		gr0e = 0x04;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		sr01 = 0x20;
+		gr0e = 0x06;
+		break;
+	default:
+		return;
+	}
+
+	WREG8(SEQ_INDEX, 0x1);
+	sr01 |= RREG8(SEQ_DATA) & ~0x20;
+	WREG_SEQ(0x1, sr01);
+
+	WREG8(GFX_INDEX, 0xe);
+	gr0e |= RREG8(GFX_DATA) & ~0x06;
+	WREG_GFX(0xe, gr0e);
+}
+
+/*
+ * The core passes the desired mode to the CRTC code to see whether any
+ * CRTC-specific modifications need to be made to it. We're in a position
+ * to just pass that straight through, so this does nothing
+ */
+static bool cirrus_crtc_mode_fixup(struct drm_crtc *crtc,
+				   const struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+void cirrus_set_start_address(struct drm_crtc *crtc, unsigned offset)
+{
+	struct cirrus_device *cdev = crtc->dev->dev_private;
+	u32 addr;
+	u8 tmp;
+
+	addr = offset >> 2;
+	WREG_CRT(0x0c, (u8)((addr >> 8) & 0xff));
+	WREG_CRT(0x0d, (u8)(addr & 0xff));
+
+	WREG8(CRT_INDEX, 0x1b);
+	tmp = RREG8(CRT_DATA);
+	tmp &= 0xf2;
+	tmp |= (addr >> 16) & 0x01;
+	tmp |= (addr >> 15) & 0x0c;
+	WREG_CRT(0x1b, tmp);
+	WREG8(CRT_INDEX, 0x1d);
+	tmp = RREG8(CRT_DATA);
+	tmp &= 0x7f;
+	tmp |= (addr >> 12) & 0x80;
+	WREG_CRT(0x1d, tmp);
+}
+
+/* cirrus is different - we will force move buffers out of VRAM */
+static int cirrus_crtc_do_set_base(struct drm_crtc *crtc,
+				struct drm_framebuffer *fb,
+				int x, int y, int atomic)
+{
+	struct cirrus_device *cdev = crtc->dev->dev_private;
+	struct drm_gem_object *obj;
+	struct cirrus_framebuffer *cirrus_fb;
+	struct cirrus_bo *bo;
+	int ret;
+	u64 gpu_addr;
+
+	/* push the previous fb to system ram */
+	if (!atomic && fb) {
+		cirrus_fb = to_cirrus_framebuffer(fb);
+		obj = cirrus_fb->obj;
+		bo = gem_to_cirrus_bo(obj);
+		ret = cirrus_bo_reserve(bo, false);
+		if (ret)
+			return ret;
+		cirrus_bo_push_sysram(bo);
+		cirrus_bo_unreserve(bo);
+	}
+
+	cirrus_fb = to_cirrus_framebuffer(crtc->fb);
+	obj = cirrus_fb->obj;
+	bo = gem_to_cirrus_bo(obj);
+
+	ret = cirrus_bo_reserve(bo, false);
+	if (ret)
+		return ret;
+
+	ret = cirrus_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr);
+	if (ret) {
+		cirrus_bo_unreserve(bo);
+		return ret;
+	}
+
+	if (&cdev->mode_info.gfbdev->gfb == cirrus_fb) {
+		/* if pushing console in kmap it */
+		ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap);
+		if (ret)
+			DRM_ERROR("failed to kmap fbcon\n");
+	}
+	cirrus_bo_unreserve(bo);
+
+	cirrus_set_start_address(crtc, (u32)gpu_addr);
+	return 0;
+}
+
+static int cirrus_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+			     struct drm_framebuffer *old_fb)
+{
+	return cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0);
+}
+
+/*
+ * The meat of this driver. The core passes us a mode and we have to program
+ * it. The modesetting here is the bare minimum required to satisfy the qemu
+ * emulation of this hardware, and running this against a real device is
+ * likely to result in an inadequately programmed mode. We've already had
+ * the opportunity to modify the mode, so whatever we receive here should
+ * be something that can be correctly programmed and displayed
+ */
+static int cirrus_crtc_mode_set(struct drm_crtc *crtc,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode,
+				int x, int y, struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct cirrus_device *cdev = dev->dev_private;
+	int hsyncstart, hsyncend, htotal, hdispend;
+	int vtotal, vdispend;
+	int tmp;
+	int sr07 = 0, hdr = 0;
+
+	htotal = mode->htotal / 8;
+	hsyncend = mode->hsync_end / 8;
+	hsyncstart = mode->hsync_start / 8;
+	hdispend = mode->hdisplay / 8;
+
+	vtotal = mode->vtotal;
+	vdispend = mode->vdisplay;
+
+	vdispend -= 1;
+	vtotal -= 2;
+
+	htotal -= 5;
+	hdispend -= 1;
+	hsyncstart += 1;
+	hsyncend += 1;
+
+	WREG_CRT(VGA_CRTC_V_SYNC_END, 0x20);
+	WREG_CRT(VGA_CRTC_H_TOTAL, htotal);
+	WREG_CRT(VGA_CRTC_H_DISP, hdispend);
+	WREG_CRT(VGA_CRTC_H_SYNC_START, hsyncstart);
+	WREG_CRT(VGA_CRTC_H_SYNC_END, hsyncend);
+	WREG_CRT(VGA_CRTC_V_TOTAL, vtotal & 0xff);
+	WREG_CRT(VGA_CRTC_V_DISP_END, vdispend & 0xff);
+
+	tmp = 0x40;
+	if ((vdispend + 1) & 512)
+		tmp |= 0x20;
+	WREG_CRT(VGA_CRTC_MAX_SCAN, tmp);
+
+	/*
+	 * Overflow bits for values that don't fit in the standard registers
+	 */
+	tmp = 16;
+	if (vtotal & 256)
+		tmp |= 1;
+	if (vdispend & 256)
+		tmp |= 2;
+	if ((vdispend + 1) & 256)
+		tmp |= 8;
+	if (vtotal & 512)
+		tmp |= 32;
+	if (vdispend & 512)
+		tmp |= 64;
+	WREG_CRT(VGA_CRTC_OVERFLOW, tmp);
+
+	tmp = 0;
+
+	/* More overflow bits */
+
+	if ((htotal + 5) & 64)
+		tmp |= 16;
+	if ((htotal + 5) & 128)
+		tmp |= 32;
+	if (vtotal & 256)
+		tmp |= 64;
+	if (vtotal & 512)
+		tmp |= 128;
+
+	WREG_CRT(CL_CRT1A, tmp);
+
+	/* Disable Hercules/CGA compatibility */
+	WREG_CRT(VGA_CRTC_MODE, 0x03);
+
+	WREG8(SEQ_INDEX, 0x7);
+	sr07 = RREG8(SEQ_DATA);
+	sr07 &= 0xe0;
+	hdr = 0;
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		sr07 |= 0x11;
+		break;
+	case 16:
+		sr07 |= 0x17;
+		hdr = 0xc1;
+		break;
+	case 24:
+		sr07 |= 0x15;
+		hdr = 0xc5;
+		break;
+	case 32:
+		sr07 |= 0x19;
+		hdr = 0xc5;
+		break;
+	default:
+		return -1;
+	}
+
+	WREG_SEQ(0x7, sr07);
+
+	/* Program the pitch */
+	tmp = crtc->fb->pitches[0] / 8;
+	WREG_CRT(VGA_CRTC_OFFSET, tmp);
+
+	/* Enable extended blanking and pitch bits, and enable full memory */
+	tmp = 0x22;
+	tmp |= (crtc->fb->pitches[0] >> 7) & 0x10;
+	tmp |= (crtc->fb->pitches[0] >> 6) & 0x40;
+	WREG_CRT(0x1b, tmp);
+
+	/* Enable high-colour modes */
+	WREG_GFX(VGA_GFX_MODE, 0x40);
+
+	/* And set graphics mode */
+	WREG_GFX(VGA_GFX_MISC, 0x01);
+
+	WREG_HDR(hdr);
+	cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0);
+
+	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
+	outb(0x20, 0x3c0);
+	return 0;
+}
+
+/*
+ * This is called before a mode is programmed. A typical use might be to
+ * enable DPMS during the programming to avoid seeing intermediate stages,
+ * but that's not relevant to us
+ */
+static void cirrus_crtc_prepare(struct drm_crtc *crtc)
+{
+}
+
+/*
+ * This is called after a mode is programmed. It should reverse anything done
+ * by the prepare function
+ */
+static void cirrus_crtc_commit(struct drm_crtc *crtc)
+{
+}
+
+/*
+ * The core can pass us a set of gamma values to program. We actually only
+ * use this for 8-bit mode so can't perform smooth fades on deeper modes,
+ * but it's a requirement that we provide the function
+ */
+static void cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+				  u16 *blue, uint32_t start, uint32_t size)
+{
+	struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
+	int i;
+
+	if (size != CIRRUS_LUT_SIZE)
+		return;
+
+	for (i = 0; i < CIRRUS_LUT_SIZE; i++) {
+		cirrus_crtc->lut_r[i] = red[i];
+		cirrus_crtc->lut_g[i] = green[i];
+		cirrus_crtc->lut_b[i] = blue[i];
+	}
+	cirrus_crtc_load_lut(crtc);
+}
+
+/* Simple cleanup function */
+static void cirrus_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
+
+	drm_crtc_cleanup(crtc);
+	kfree(cirrus_crtc);
+}
+
+/* These provide the minimum set of functions required to handle a CRTC */
+static const struct drm_crtc_funcs cirrus_crtc_funcs = {
+	.gamma_set = cirrus_crtc_gamma_set,
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = cirrus_crtc_destroy,
+};
+
+static const struct drm_crtc_helper_funcs cirrus_helper_funcs = {
+	.dpms = cirrus_crtc_dpms,
+	.mode_fixup = cirrus_crtc_mode_fixup,
+	.mode_set = cirrus_crtc_mode_set,
+	.mode_set_base = cirrus_crtc_mode_set_base,
+	.prepare = cirrus_crtc_prepare,
+	.commit = cirrus_crtc_commit,
+	.load_lut = cirrus_crtc_load_lut,
+};
+
+/* CRTC setup */
+static void cirrus_crtc_init(struct drm_device *dev)
+{
+	struct cirrus_device *cdev = dev->dev_private;
+	struct cirrus_crtc *cirrus_crtc;
+	int i;
+
+	cirrus_crtc = kzalloc(sizeof(struct cirrus_crtc) +
+			      (CIRRUSFB_CONN_LIMIT * sizeof(struct drm_connector *)),
+			      GFP_KERNEL);
+
+	if (cirrus_crtc == NULL)
+		return;
+
+	drm_crtc_init(dev, &cirrus_crtc->base, &cirrus_crtc_funcs);
+
+	drm_mode_crtc_set_gamma_size(&cirrus_crtc->base, CIRRUS_LUT_SIZE);
+	cdev->mode_info.crtc = cirrus_crtc;
+
+	for (i = 0; i < CIRRUS_LUT_SIZE; i++) {
+		cirrus_crtc->lut_r[i] = i;
+		cirrus_crtc->lut_g[i] = i;
+		cirrus_crtc->lut_b[i] = i;
+	}
+
+	drm_crtc_helper_add(&cirrus_crtc->base, &cirrus_helper_funcs);
+}
+
+/** Sets the color ramps on behalf of fbcon */
+void cirrus_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+			      u16 blue, int regno)
+{
+	struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
+
+	cirrus_crtc->lut_r[regno] = red;
+	cirrus_crtc->lut_g[regno] = green;
+	cirrus_crtc->lut_b[regno] = blue;
+}
+
+/** Gets the color ramps on behalf of fbcon */
+void cirrus_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+			      u16 *blue, int regno)
+{
+	struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
+
+	*red = cirrus_crtc->lut_r[regno];
+	*green = cirrus_crtc->lut_g[regno];
+	*blue = cirrus_crtc->lut_b[regno];
+}
+
+
+static bool cirrus_encoder_mode_fixup(struct drm_encoder *encoder,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void cirrus_encoder_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void cirrus_encoder_dpms(struct drm_encoder *encoder, int state)
+{
+	return;
+}
+
+static void cirrus_encoder_prepare(struct drm_encoder *encoder)
+{
+}
+
+static void cirrus_encoder_commit(struct drm_encoder *encoder)
+{
+}
+
+void cirrus_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct cirrus_encoder *cirrus_encoder = to_cirrus_encoder(encoder);
+	drm_encoder_cleanup(encoder);
+	kfree(cirrus_encoder);
+}
+
+static const struct drm_encoder_helper_funcs cirrus_encoder_helper_funcs = {
+	.dpms = cirrus_encoder_dpms,
+	.mode_fixup = cirrus_encoder_mode_fixup,
+	.mode_set = cirrus_encoder_mode_set,
+	.prepare = cirrus_encoder_prepare,
+	.commit = cirrus_encoder_commit,
+};
+
+static const struct drm_encoder_funcs cirrus_encoder_encoder_funcs = {
+	.destroy = cirrus_encoder_destroy,
+};
+
+static struct drm_encoder *cirrus_encoder_init(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+	struct cirrus_encoder *cirrus_encoder;
+
+	cirrus_encoder = kzalloc(sizeof(struct cirrus_encoder), GFP_KERNEL);
+	if (!cirrus_encoder)
+		return NULL;
+
+	encoder = &cirrus_encoder->base;
+	encoder->possible_crtcs = 0x1;
+
+	drm_encoder_init(dev, encoder, &cirrus_encoder_encoder_funcs,
+			 DRM_MODE_ENCODER_DAC);
+	drm_encoder_helper_add(encoder, &cirrus_encoder_helper_funcs);
+
+	return encoder;
+}
+
+
+int cirrus_vga_get_modes(struct drm_connector *connector)
+{
+	/* Just add a static list of modes */
+	drm_add_modes_noedid(connector, 640, 480);
+	drm_add_modes_noedid(connector, 800, 600);
+	drm_add_modes_noedid(connector, 1024, 768);
+	drm_add_modes_noedid(connector, 1280, 1024);
+
+	return 4;
+}
+
+static int cirrus_vga_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	/* Any mode we've added is valid */
+	return MODE_OK;
+}
+
+struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector
+						  *connector)
+{
+	int enc_id = connector->encoder_ids[0];
+	struct drm_mode_object *obj;
+	struct drm_encoder *encoder;
+
+	/* pick the encoder ids */
+	if (enc_id) {
+		obj =
+		    drm_mode_object_find(connector->dev, enc_id,
+					 DRM_MODE_OBJECT_ENCODER);
+		if (!obj)
+			return NULL;
+		encoder = obj_to_encoder(obj);
+		return encoder;
+	}
+	return NULL;
+}
+
+static enum drm_connector_status cirrus_vga_detect(struct drm_connector
+						   *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+static void cirrus_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = {
+	.get_modes = cirrus_vga_get_modes,
+	.mode_valid = cirrus_vga_mode_valid,
+	.best_encoder = cirrus_connector_best_encoder,
+};
+
+struct drm_connector_funcs cirrus_vga_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = cirrus_vga_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = cirrus_connector_destroy,
+};
+
+static struct drm_connector *cirrus_vga_init(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct cirrus_connector *cirrus_connector;
+
+	cirrus_connector = kzalloc(sizeof(struct cirrus_connector), GFP_KERNEL);
+	if (!cirrus_connector)
+		return NULL;
+
+	connector = &cirrus_connector->base;
+
+	drm_connector_init(dev, connector,
+			   &cirrus_vga_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	drm_connector_helper_add(connector, &cirrus_vga_connector_helper_funcs);
+
+	return connector;
+}
+
+
+int cirrus_modeset_init(struct cirrus_device *cdev)
+{
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	int ret;
+
+	drm_mode_config_init(cdev->dev);
+	cdev->mode_info.mode_config_initialized = true;
+
+	cdev->dev->mode_config.max_width = CIRRUS_MAX_FB_WIDTH;
+	cdev->dev->mode_config.max_height = CIRRUS_MAX_FB_HEIGHT;
+
+	cdev->dev->mode_config.fb_base = cdev->mc.vram_base;
+	cdev->dev->mode_config.preferred_depth = 24;
+	/* don't prefer a shadow on virt GPU */
+	cdev->dev->mode_config.prefer_shadow = 0;
+
+	cirrus_crtc_init(cdev->dev);
+
+	encoder = cirrus_encoder_init(cdev->dev);
+	if (!encoder) {
+		DRM_ERROR("cirrus_encoder_init failed\n");
+		return -1;
+	}
+
+	connector = cirrus_vga_init(cdev->dev);
+	if (!connector) {
+		DRM_ERROR("cirrus_vga_init failed\n");
+		return -1;
+	}
+
+	drm_mode_connector_attach_encoder(connector, encoder);
+
+	ret = cirrus_fbdev_init(cdev);
+	if (ret) {
+		DRM_ERROR("cirrus_fbdev_init failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+void cirrus_modeset_fini(struct cirrus_device *cdev)
+{
+	cirrus_fbdev_fini(cdev);
+
+	if (cdev->mode_info.mode_config_initialized) {
+		drm_mode_config_cleanup(cdev->dev);
+		cdev->mode_info.mode_config_initialized = false;
+	}
+}
-- 
cgit v1.3.1