From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 arch/arm/mach-pxa/eseries.c | 983 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 983 insertions(+)
 create mode 100644 arch/arm/mach-pxa/eseries.c

(limited to 'arch/arm/mach-pxa/eseries.c')

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
new file mode 100644
index 00000000..8280ebca
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.c
@@ -0,0 +1,983 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/pxa25x.h>
+#include <mach/eseries-gpio.h>
+#include <mach/eseries-irq.h>
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/udc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+
+#include "devices.h"
+#include "generic.h"
+#include "clock.h"
+
+/* Only e800 has 128MB RAM */
+void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks=1;
+	mi->bank[0].start = 0xa0000000;
+	if (machine_is_e800())
+		mi->bank[0].size = (128*1024*1024);
+	else
+		mi->bank[0].size = (64*1024*1024);
+}
+
+struct gpio_vbus_mach_info e7xx_udc_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct platform_device e7xx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e7xx_udc_info,
+	},
+};
+
+struct pxaficp_platform_data e7xx_ficp_platform_data = {
+	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+int eseries_tmio_enable(struct platform_device *dev)
+{
+	/* Reset - bring SUSPEND high before PCLR */
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
+	msleep(1);
+	return 0;
+}
+
+int eseries_tmio_disable(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	return 0;
+}
+
+int eseries_tmio_suspend(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	return 0;
+}
+
+int eseries_tmio_resume(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	return 0;
+}
+
+void eseries_get_tmio_gpios(void)
+{
+	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
+	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
+	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
+}
+
+/* TMIO controller uses the same resources on all e-series machines. */
+struct resource eseries_tmio_resources[] = {
+	[0] = {
+		.start  = PXA_CS4_PHYS,
+		.end    = PXA_CS4_PHYS + 0x1fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+/* Some e-series hardware cannot control the 32K clock */
+static void clk_32k_dummy(struct clk *clk)
+{
+}
+
+static const struct clkops clk_32k_dummy_ops = {
+	.enable         = clk_32k_dummy,
+	.disable        = clk_32k_dummy,
+};
+
+static struct clk tmio_dummy_clk = {
+	.ops	= &clk_32k_dummy_ops,
+	.rate	= 32768,
+};
+
+static struct clk_lookup eseries_clkregs[] = {
+	INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
+};
+
+static void __init eseries_register_clks(void)
+{
+	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+}
+
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+	.enable   = &eseries_tmio_enable,
+	.disable  = &eseries_tmio_disable,
+	.suspend  = &eseries_tmio_suspend,
+	.resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+	.name           = "tc6387xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e330_tc6387xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+	&e330_tc6387xb_device,
+	&e7xx_gpio_vbus,
+};
+
+static void __init e330_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+	.irq_base               = IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e350_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+	&e350_t7l66xb_device,
+	&e7xx_gpio_vbus,
+};
+
+static void __init e350_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+	.name = "Internal NAND flash",
+	.offset =  0,
+	.size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+	.num_partitions = 1,
+	.partition = &partition_a,
+	.badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+
+	.nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e400_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+	&e400_t7l66xb_device,
+	&e7xx_gpio_vbus,
+};
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	/* Fixme - e400 may have a switched clock */
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
+	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e740_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+static struct platform_device e740_audio_device = {
+	.name		= "e740-audio",
+	.id		= -1,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+	&e740_fb_device,
+	&e740_t7l66xb_device,
+	&e7xx_gpio_vbus,
+	&e740_audio_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+			"UDCCLK", &pxa25x_device_udc.dev),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO11_3_6MHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e750_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+static struct platform_device e750_audio_device = {
+	.name		= "e750-audio",
+	.id		= -1,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+	&e750_fb_device,
+	&e750_tc6393xb_device,
+	&e7xx_gpio_vbus,
+	&e750_audio_device,
+};
+
+static void __init e750_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct gpio_vbus_mach_info e800_udc_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct platform_device e800_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e800_udc_info,
+	},
+};
+
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e800_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+static struct platform_device e800_audio_device = {
+	.name		= "e800-audio",
+	.id		= -1,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+	&e800_fb_device,
+	&e800_tc6393xb_device,
+	&e800_gpio_vbus,
+	&e800_audio_device,
+};
+
+static void __init e800_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+	pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
-- 
cgit v1.3.1