From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 arch/arm/mach-omap2/board-igep0020.c | 679 +++++++++++++++++++++++++++++++++++
 1 file changed, 679 insertions(+)
 create mode 100644 arch/arm/mach-omap2/board-igep0020.c

(limited to 'arch/arm/mach-omap2/board-igep0020.c')

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
new file mode 100644
index 00000000..b54562d1
--- /dev/null
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -0,0 +1,679 @@
+/*
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/usb/phy.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
+
+#include <linux/mtd/nand.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
+#include "common.h"
+#include "gpmc.h"
+#include "mux.h"
+#include "hsmmc.h"
+#include "sdram-numonyx-m65kxxxxam.h"
+#include "common-board-devices.h"
+#include "board-flash.h"
+#include "control.h"
+#include "gpmc-onenand.h"
+
+#define IGEP2_SMSC911X_CS       5
+#define IGEP2_SMSC911X_GPIO     176
+#define IGEP2_GPIO_USBH_NRESET  24
+#define IGEP2_GPIO_LED0_GREEN   26
+#define IGEP2_GPIO_LED0_RED     27
+#define IGEP2_GPIO_LED1_RED     28
+#define IGEP2_GPIO_DVI_PUP      170
+
+#define IGEP2_RB_GPIO_WIFI_NPD     94
+#define IGEP2_RB_GPIO_WIFI_NRESET  95
+#define IGEP2_RB_GPIO_BT_NRESET    137
+#define IGEP2_RC_GPIO_WIFI_NPD     138
+#define IGEP2_RC_GPIO_WIFI_NRESET  139
+#define IGEP2_RC_GPIO_BT_NRESET    137
+
+#define IGEP3_GPIO_LED0_GREEN	54
+#define IGEP3_GPIO_LED0_RED	53
+#define IGEP3_GPIO_LED1_RED	16
+#define IGEP3_GPIO_USBH_NRESET  183
+
+#define IGEP_SYSBOOT_MASK           0x1f
+#define IGEP_SYSBOOT_NAND           0x0f
+#define IGEP_SYSBOOT_ONENAND        0x10
+
+/*
+ * IGEP2 Hardware Revision Table
+ *
+ *  --------------------------------------------------------------------------
+ * | Id. | Hw Rev.            | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
+ *  --------------------------------------------------------------------------
+ * |  0  | B                  |   high   |  gpio94  |   gpio95    |     -     |
+ * |  0  | B/C (B-compatible) |   high   |  gpio94  |   gpio95    |  gpio137  |
+ * |  1  | C                  |   low    |  gpio138 |   gpio139   |  gpio137  |
+ *  --------------------------------------------------------------------------
+ */
+
+#define IGEP2_BOARD_HWREV_B	0
+#define IGEP2_BOARD_HWREV_C	1
+#define IGEP3_BOARD_HWREV	2
+
+static u8 hwrev;
+
+static void __init igep2_get_revision(void)
+{
+	u8 ret;
+
+	if (machine_is_igep0030()) {
+		hwrev = IGEP3_BOARD_HWREV;
+		return;
+	}
+
+	omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
+
+	if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
+		pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
+		pr_err("IGEP2: Unknown Hardware Revision\n");
+		return;
+	}
+
+	ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
+	if (ret == 0) {
+		pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
+		hwrev = IGEP2_BOARD_HWREV_C;
+	} else if (ret ==  1) {
+		pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
+		hwrev = IGEP2_BOARD_HWREV_B;
+	} else {
+		pr_err("IGEP2: Unknown Hardware Revision\n");
+		hwrev = -1;
+	}
+
+	gpio_free(IGEP2_GPIO_LED1_RED);
+}
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
+	defined(CONFIG_MTD_NAND_OMAP2) ||		\
+	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+
+#define ONENAND_MAP             0x20000000
+
+/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
+ * Since the device is equipped with two DataRAMs, and two-plane NAND
+ * Flash memory array, these two component enables simultaneous program
+ * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ * while Plane2 has only odd blocks such as block1, block3, block5.
+ * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
+ */
+
+static struct mtd_partition igep_flash_partitions[] = {
+	{
+		.name           = "X-Loader",
+		.offset         = 0,
+		.size           = 2 * (64*(2*2048))
+	},
+	{
+		.name           = "U-Boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 6 * (64*(2*2048)),
+	},
+	{
+		.name           = "Environment",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 2 * (64*(2*2048)),
+	},
+	{
+		.name           = "Kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 12 * (64*(2*2048)),
+	},
+	{
+		.name           = "File System",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static inline u32 igep_get_sysboot_value(void)
+{
+	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
+}
+
+static void __init igep_flash_init(void)
+{
+	u32 mux;
+	mux = igep_get_sysboot_value();
+
+	if (mux == IGEP_SYSBOOT_NAND) {
+		pr_info("IGEP: initializing NAND memory device\n");
+		board_nand_init(igep_flash_partitions,
+				ARRAY_SIZE(igep_flash_partitions),
+				0, NAND_BUSWIDTH_16, nand_default_timings);
+	} else if (mux == IGEP_SYSBOOT_ONENAND) {
+		pr_info("IGEP: initializing OneNAND memory device\n");
+		board_onenand_init(igep_flash_partitions,
+				   ARRAY_SIZE(igep_flash_partitions), 0);
+	} else {
+		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
+	}
+}
+
+#else
+static void __init igep_flash_init(void) {}
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+#include "gpmc-smsc911x.h"
+
+static struct omap_smsc911x_platform_data smsc911x_cfg = {
+	.cs             = IGEP2_SMSC911X_CS,
+	.gpio_irq       = IGEP2_SMSC911X_GPIO,
+	.gpio_reset     = -EINVAL,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static inline void __init igep2_init_smsc911x(void)
+{
+	gpmc_smsc911x_init(&smsc911x_cfg);
+}
+
+#else
+static inline void __init igep2_init_smsc911x(void) { }
+#endif
+
+static struct regulator_consumer_supply igep_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data igep_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
+	.consumer_supplies      = igep_vmmc1_supply,
+};
+
+static struct regulator_consumer_supply igep_vio_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
+
+static struct regulator_init_data igep_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= 1,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
+	.consumer_supplies      = igep_vio_supply,
+};
+
+static struct regulator_consumer_supply igep_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
+
+static struct regulator_init_data igep_vmmc2 = {
+	.constraints		= {
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.always_on		= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
+	.consumer_supplies	= igep_vmmc2_supply,
+};
+
+static struct fixed_voltage_config igep_vwlan = {
+	.supply_name		= "vwlan",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.enabled_at_boot	= 1,
+	.init_data		= &igep_vmmc2,
+};
+
+static struct platform_device igep_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &igep_vwlan,
+	},
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.deferred	= true,
+	},
+#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
+	{
+		.mmc		= 2,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+#endif
+	{}      /* Terminator */
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep_gpio_leds[] = {
+	[0] = {
+		.name			= "omap3:red:user0",
+		.default_state		= 0,
+	},
+	[1] = {
+		.name			= "omap3:green:boot",
+		.default_state		= 1,
+	},
+	[2] = {
+		.name			= "omap3:red:user1",
+		.default_state		= 0,
+	},
+	[3] = {
+		.name			= "omap3:green:user1",
+		.default_state		= 0,
+		.gpio			= -EINVAL, /* gets replaced */
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data igep_led_pdata = {
+	.leds           = igep_gpio_leds,
+	.num_leds       = ARRAY_SIZE(igep_gpio_leds),
+};
+
+static struct platform_device igep_led_device = {
+	 .name   = "leds-gpio",
+	 .id     = -1,
+	 .dev    = {
+		 .platform_data  =  &igep_led_pdata,
+	},
+};
+
+static void __init igep_leds_init(void)
+{
+	if (machine_is_igep0020()) {
+		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
+		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
+		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
+	} else {
+		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
+		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
+		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
+	}
+
+	platform_device_register(&igep_led_device);
+}
+
+#else
+static struct gpio igep_gpio_leds[] __initdata = {
+	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d0"   },
+	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
+	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d1"   },
+};
+
+static inline void igep_leds_init(void)
+{
+	int i;
+
+	if (machine_is_igep0020()) {
+		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
+		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
+		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
+	} else {
+		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
+		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
+		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
+	}
+
+	if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
+		pr_warning("IGEP v2: Could not obtain leds gpios\n");
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
+		gpio_export(igep_gpio_leds[i].gpio, 0);
+}
+#endif
+
+static struct gpio igep2_twl_gpios[] = {
+	{ -EINVAL, GPIOF_IN,		"GPIO_EHCI_NOC"  },
+	{ -EINVAL, GPIOF_OUT_INIT_LOW,	"GPIO_USBH_CPEN" },
+};
+
+static int igep_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	int ret;
+
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	omap_hsmmc_late_init(mmc);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+	ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
+			       "gpio-led:green:d1");
+	if (ret == 0)
+		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
+	else
+		pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
+#else
+	igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
+
+	if (machine_is_igep0030())
+		return 0;
+
+	/*
+	 * REVISIT: need ehci-omap hooks for external VBUS
+	 * power switch and overcurrent detect
+	 */
+	igep2_twl_gpios[0].gpio = gpio + 1;
+
+	/* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
+	igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
+
+	ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
+	if (ret < 0)
+		pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
+
+	return 0;
+};
+
+static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
+	.use_leds	= true,
+	.setup		= igep_twl_gpio_setup,
+};
+
+static struct tfp410_platform_data dvi_panel = {
+	.i2c_bus_num		= 3,
+	.power_down_gpio	= IGEP2_GPIO_DVI_PUP,
+};
+
+static struct omap_dss_device igep2_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "tfp410",
+	.data			= &dvi_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+static struct omap_dss_device *igep2_dss_devices[] = {
+	&igep2_dvi_device
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
+	.devices	= igep2_dss_devices,
+	.default_device	= &igep2_dvi_device,
+};
+
+static struct platform_device *igep_devices[] __initdata = {
+	&igep_vwlan_device,
+};
+
+static int igep2_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P)
+};
+
+static struct matrix_keymap_data igep2_keymap_data = {
+	.keymap			= igep2_keymap,
+	.keymap_size		= ARRAY_SIZE(igep2_keymap),
+};
+
+static struct twl4030_keypad_data igep2_keypad_pdata = {
+	.keymap_data	= &igep2_keymap_data,
+	.rows		= 4,
+	.cols		= 4,
+	.rep		= 1,
+};
+
+static struct twl4030_platform_data igep_twldata = {
+	/* platform_data for children goes here */
+	.gpio		= &igep_twl4030_gpio_pdata,
+	.vmmc1          = &igep_vmmc1,
+	.vio		= &igep_vio,
+};
+
+static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("eeprom", 0x50),
+	},
+};
+
+static void __init igep_i2c_init(void)
+{
+	int ret;
+
+	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
+			      TWL_COMMON_REGULATOR_VPLL2);
+	igep_twldata.vpll2->constraints.apply_uV = true;
+	igep_twldata.vpll2->constraints.name = "VDVI";
+
+	if (machine_is_igep0020()) {
+		/*
+		 * Bus 3 is attached to the DVI port where devices like the
+		 * pico DLP projector don't work reliably with 400kHz
+		 */
+		ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
+					    ARRAY_SIZE(igep2_i2c3_boardinfo));
+		if (ret)
+			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
+
+		igep_twldata.keypad	= &igep2_keypad_pdata;
+		/* Get common pmic data */
+		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
+	}
+
+	omap3_pmic_init("twl4030", &igep_twldata);
+}
+
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = IGEP2_GPIO_USBH_NRESET,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = IGEP3_GPIO_USBH_NRESET,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
+static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+};
+
+static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
+static struct gpio igep_wlan_bt_gpios[] __initdata = {
+	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD"	   },
+	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
+	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET"   },
+};
+
+static void __init igep_wlan_bt_init(void)
+{
+	int err;
+
+	/* GPIO's for WLAN-BT combo depends on hardware revision */
+	if (hwrev == IGEP2_BOARD_HWREV_B) {
+		igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
+		igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
+		igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
+	} else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
+		igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
+		igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
+		igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
+	} else
+		return;
+
+	/* Make sure that the GPIO pins are muxed correctly */
+	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
+	err = gpio_request_array(igep_wlan_bt_gpios,
+				 ARRAY_SIZE(igep_wlan_bt_gpios));
+	if (err) {
+		pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
+		return;
+	}
+
+	gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
+	gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
+	gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
+
+	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
+	udelay(10);
+	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
+
+}
+#else
+static inline void __init igep_wlan_bt_init(void) { }
+#endif
+
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static void __init igep_init(void)
+{
+	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+	/* Get IGEP2 hardware revision */
+	igep2_get_revision();
+
+	omap_hsmmc_init(mmc);
+
+	/* Register I2C busses and drivers */
+	igep_i2c_init();
+	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
+	omap_serial_init();
+	omap_sdrc_init(m65kxxxxam_sdrc_params,
+				  m65kxxxxam_sdrc_params);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	usb_musb_init(NULL);
+
+	igep_flash_init();
+	igep_leds_init();
+	omap_twl4030_audio_init("igep2", NULL);
+
+	/*
+	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
+	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
+	 */
+	igep_wlan_bt_init();
+
+	if (machine_is_igep0020()) {
+		omap_display_init(&igep2_dss_data);
+		igep2_init_smsc911x();
+		usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
+		usbhs_init(&igep2_usbhs_bdata);
+	} else {
+		usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
+		usbhs_init(&igep3_usbhs_bdata);
+	}
+}
+
+MACHINE_START(IGEP0020, "IGEP v2 board")
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.restart	= omap3xxx_restart,
+MACHINE_END
+
+MACHINE_START(IGEP0030, "IGEP OMAP3 module")
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.restart	= omap3xxx_restart,
+MACHINE_END
-- 
cgit v1.3.1