From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 arch/arm/mach-omap2/board-2430sdp.c | 260 ++++++++++++++++++++++++++++++++++++
 1 file changed, 260 insertions(+)
 create mode 100644 arch/arm/mach-omap2/board-2430sdp.c

(limited to 'arch/arm/mach-omap2/board-2430sdp.c')

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
new file mode 100644
index 00000000..244d8a5a
--- /dev/null
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -0,0 +1,260 @@
+/*
+ * linux/arch/arm/mach-omap2/board-2430sdp.c
+ *
+ * Copyright (C) 2006 Texas Instruments
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * Initial Code : Based on a patch from Komal Shah and Richard Woodruff
+ * Updated the Code for 2430 SDP : Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
+#include <linux/delay.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/phy.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "gpmc.h"
+#include "gpmc-smc91x.h"
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "common-board-devices.h"
+
+#define SDP2430_CS0_BASE	0x04000000
+#define SECONDARY_LCD_GPIO		147
+
+static struct mtd_partition sdp2430_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	 },
+	/* bootloader params in the next sector */
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= 0,
+	 },
+	/* kernel */
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data sdp2430_flash_data = {
+	.width		= 2,
+	.parts		= sdp2430_partitions,
+	.nr_parts	= ARRAY_SIZE(sdp2430_partitions),
+};
+
+static struct resource sdp2430_flash_resource = {
+	.start		= SDP2430_CS0_BASE,
+	.end		= SDP2430_CS0_BASE + SZ_64M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sdp2430_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &sdp2430_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sdp2430_flash_resource,
+};
+
+static struct platform_device *sdp2430_devices[] __initdata = {
+	&sdp2430_flash_device,
+};
+
+/* LCD */
+#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
+#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
+
+static struct panel_generic_dpi_data sdp2430_panel_data = {
+	.name			= "nec_nl2432dr22-11b",
+	.num_gpios		= 2,
+	.gpios			= {
+		SDP2430_LCD_PANEL_ENABLE_GPIO,
+		SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
+	},
+};
+
+static struct omap_dss_device sdp2430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 16,
+	.data			= &sdp2430_panel_data,
+};
+
+static struct omap_dss_device *sdp2430_dss_devices[] = {
+	&sdp2430_lcd_device,
+};
+
+static struct omap_dss_board_info sdp2430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp2430_dss_devices),
+	.devices	= sdp2430_dss_devices,
+	.default_device	= &sdp2430_lcd_device,
+};
+
+#if IS_ENABLED(CONFIG_SMC91X)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 5,
+	.gpio_irq	= 149,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+
+};
+
+static void __init board_smc91x_init(void)
+{
+	omap_mux_init_gpio(149, OMAP_PIN_INPUT);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
+static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp2430_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(sdp2430_vmmc1_supplies),
+	.consumer_supplies	= &sdp2430_vmmc1_supplies[0],
+};
+
+static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
+};
+
+static struct twl4030_platform_data sdp2430_twldata = {
+	/* platform_data for children goes here */
+	.gpio		= &sdp2430_gpio_data,
+	.vmmc1		= &sdp2430_vmmc1,
+};
+
+static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2D),
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
+static int __init omap2430_i2c_init(void)
+{
+	sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
+	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
+			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
+	omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
+			&sdp2430_twldata);
+	return 0;
+}
+
+static struct omap2_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.ext_clock	= 1,
+	},
+	{}	/* Terminator */
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static void __init omap_2430sdp_init(void)
+{
+	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
+	omap2430_i2c_init();
+
+	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
+	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
+	omap_hsmmc_init(mmc);
+
+	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	usb_musb_init(NULL);
+
+	board_smc91x_init();
+
+	/* Turn off secondary LCD backlight */
+	gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
+			 "Secondary LCD backlight");
+
+	omap_display_init(&sdp2430_dss_data);
+}
+
+MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
+	/* Maintainer: Syed Khasim - Texas Instruments Inc */
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap243x_map_io,
+	.init_early	= omap2430_init_early,
+	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
+	.init_machine	= omap_2430sdp_init,
+	.init_late	= omap2430_init_late,
+	.init_time	= omap2_sync32k_timer_init,
+	.restart	= omap2xxx_restart,
+MACHINE_END
-- 
cgit v1.3.1