From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 arch/arm/mach-clps711x/Kconfig                    |  56 ++++
 arch/arm/mach-clps711x/Makefile                   |  17 +
 arch/arm/mach-clps711x/Makefile.boot              |   5 +
 arch/arm/mach-clps711x/board-autcpu12.c           | 179 +++++++++++
 arch/arm/mach-clps711x/board-cdb89712.c           | 147 +++++++++
 arch/arm/mach-clps711x/board-clep7312.c           |  46 +++
 arch/arm/mach-clps711x/board-edb7211.c            | 180 +++++++++++
 arch/arm/mach-clps711x/board-fortunet.c           |  84 +++++
 arch/arm/mach-clps711x/board-p720t.c              | 232 ++++++++++++++
 arch/arm/mach-clps711x/common.c                   | 367 ++++++++++++++++++++++
 arch/arm/mach-clps711x/common.h                   |  15 +
 arch/arm/mach-clps711x/include/mach/autcpu12.h    |  59 ++++
 arch/arm/mach-clps711x/include/mach/clps711x.h    | 304 ++++++++++++++++++
 arch/arm/mach-clps711x/include/mach/debug-macro.S |  38 +++
 arch/arm/mach-clps711x/include/mach/hardware.h    |  80 +++++
 arch/arm/mach-clps711x/include/mach/memory.h      |  41 +++
 arch/arm/mach-clps711x/include/mach/syspld.h      | 116 +++++++
 arch/arm/mach-clps711x/include/mach/timex.h       |   2 +
 arch/arm/mach-clps711x/include/mach/uncompress.h  |  55 ++++
 19 files changed, 2023 insertions(+)
 create mode 100644 arch/arm/mach-clps711x/Kconfig
 create mode 100644 arch/arm/mach-clps711x/Makefile
 create mode 100644 arch/arm/mach-clps711x/Makefile.boot
 create mode 100644 arch/arm/mach-clps711x/board-autcpu12.c
 create mode 100644 arch/arm/mach-clps711x/board-cdb89712.c
 create mode 100644 arch/arm/mach-clps711x/board-clep7312.c
 create mode 100644 arch/arm/mach-clps711x/board-edb7211.c
 create mode 100644 arch/arm/mach-clps711x/board-fortunet.c
 create mode 100644 arch/arm/mach-clps711x/board-p720t.c
 create mode 100644 arch/arm/mach-clps711x/common.c
 create mode 100644 arch/arm/mach-clps711x/common.h
 create mode 100644 arch/arm/mach-clps711x/include/mach/autcpu12.h
 create mode 100644 arch/arm/mach-clps711x/include/mach/clps711x.h
 create mode 100644 arch/arm/mach-clps711x/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-clps711x/include/mach/hardware.h
 create mode 100644 arch/arm/mach-clps711x/include/mach/memory.h
 create mode 100644 arch/arm/mach-clps711x/include/mach/syspld.h
 create mode 100644 arch/arm/mach-clps711x/include/mach/timex.h
 create mode 100644 arch/arm/mach-clps711x/include/mach/uncompress.h

(limited to 'arch/arm/mach-clps711x')

diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
new file mode 100644
index 00000000..2d00165e
--- /dev/null
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -0,0 +1,56 @@
+if ARCH_CLPS711X
+
+menu "CLPS711X/EP721X/EP731X Implementations"
+
+config ARCH_AUTCPU12
+	bool "AUTCPU12"
+	help
+	  Say Y if you intend to run the kernel on the autronix autcpu12
+	  board. This board is based on a Cirrus Logic CS89712.
+
+config ARCH_CDB89712
+	bool "CDB89712"
+	help
+	  This is an evaluation board from Cirrus for the CS89712 processor.
+	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
+	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
+
+config ARCH_CLEP7312
+	bool "CLEP7312"
+	help
+	  Boards based on the Cirrus Logic 7212/7312 chips.
+
+config ARCH_EDB7211
+	bool "EDB7211"
+	select ARCH_SELECT_MEMORY_MODEL
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
+	  evaluation board.
+
+config ARCH_P720T
+	bool "P720T"
+	help
+	  Say Y here if you intend to run this kernel on the ARM Prospector
+	  720T.
+
+config ARCH_FORTUNET
+	bool "FORTUNET"
+
+config EP72XX_ROM_BOOT
+	bool "EP721x/EP731x ROM boot"
+	help
+	  If you say Y here, your CLPS711x-based kernel will use the bootstrap
+	  mode memory map instead of the normal memory map.
+
+	  Processors derived from the Cirrus CLPS711X core support two boot
+	  modes.  Normal mode boots from the external memory device at CS0.
+	  Bootstrap mode rearranges parts of the memory map, placing an
+	  internal 128 byte bootstrap ROM at CS0.  This option performs the
+	  address map changes required to support booting in this mode.
+
+	  You almost surely want to say N here.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
new file mode 100644
index 00000000..992995af
--- /dev/null
+++ b/arch/arm/mach-clps711x/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y			:= common.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
+obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
+obj-$(CONFIG_ARCH_CLEP7312)	+= board-clep7312.o
+obj-$(CONFIG_ARCH_EDB7211)	+= board-edb7211.o
+obj-$(CONFIG_ARCH_FORTUNET)	+= board-fortunet.o
+obj-$(CONFIG_ARCH_P720T)	+= board-p720t.o
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
new file mode 100644
index 00000000..eba77d35
--- /dev/null
+++ b/arch/arm/mach-clps711x/Makefile.boot
@@ -0,0 +1,5 @@
+# The standard locations for stuff on CLPS711x type processors
+params_phys-y				:= 0xc0000100
+# Should probably have some agreement on these...
+initrd_phys-$(CONFIG_ARCH_P720T)	:= 0xc0400000
+initrd_phys-$(CONFIG_ARCH_CDB89712)	:= 0x00700000
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
new file mode 100644
index 00000000..f3858470
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -0,0 +1,179 @@
+/*
+ *  linux/arch/arm/mach-clps711x/autcpu12.c
+ *
+ * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand-gpio.h>
+#include <linux/platform_device.h>
+#include <linux/basic_mmio_gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+
+#include <asm/mach/map.h>
+#include <mach/autcpu12.h>
+
+#include "common.h"
+
+#define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
+#define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
+
+#define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
+#define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
+
+#define AUTCPU12_MMGPIO_BASE	(CLPS711X_NR_GPIO)
+#define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
+#define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
+#define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
+#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 3)
+
+static struct resource autcpu12_cs8900_resource[] __initdata = {
+	DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K),
+	DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ),
+};
+
+static struct resource autcpu12_nvram_resource[] __initdata = {
+	DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"),
+};
+
+static struct platform_device autcpu12_nvram_pdev __initdata = {
+	.name		= "autcpu12_nvram",
+	.id		= -1,
+	.resource	= autcpu12_nvram_resource,
+	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
+};
+
+static struct resource autcpu12_nand_resource[] __initdata = {
+	DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16),
+};
+
+static struct mtd_partition autcpu12_nand_parts[] __initdata = {
+	{
+		.name	= "Flash partition 1",
+		.offset	= 0,
+		.size	= SZ_8M,
+	},
+	{
+		.name	= "Flash partition 2",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata,
+					 size_t sz)
+{
+	switch (sz) {
+	case SZ_16M:
+	case SZ_32M:
+		break;
+	case SZ_64M:
+	case SZ_128M:
+		pdata->parts[0].size = SZ_16M;
+		break;
+	default:
+		pr_warn("Unsupported SmartMedia device size %u\n", sz);
+		break;
+	}
+}
+
+static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = {
+	.gpio_rdy	= AUTCPU12_SMC_RDY,
+	.gpio_nce	= AUTCPU12_SMC_NCE,
+	.gpio_ale	= AUTCPU12_SMC_ALE,
+	.gpio_cle	= AUTCPU12_SMC_CLE,
+	.gpio_nwp	= -1,
+	.chip_delay	= 20,
+	.parts		= autcpu12_nand_parts,
+	.num_parts	= ARRAY_SIZE(autcpu12_nand_parts),
+	.adjust_parts	= autcpu12_adjust_parts,
+};
+
+static struct platform_device autcpu12_nand_pdev __initdata = {
+	.name		= "gpio-nand",
+	.id		= -1,
+	.resource	= autcpu12_nand_resource,
+	.num_resources	= ARRAY_SIZE(autcpu12_nand_resource),
+	.dev		= {
+		.platform_data = &autcpu12_nand_pdata,
+	},
+};
+
+static struct resource autcpu12_mmgpio_resource[] __initdata = {
+	DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"),
+};
+
+static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = {
+	.base	= AUTCPU12_MMGPIO_BASE,
+	.ngpio	= 8,
+};
+
+static struct platform_device autcpu12_mmgpio_pdev __initdata = {
+	.name		= "basic-mmio-gpio",
+	.id		= -1,
+	.resource	= autcpu12_mmgpio_resource,
+	.num_resources	= ARRAY_SIZE(autcpu12_mmgpio_resource),
+	.dev		= {
+		.platform_data = &autcpu12_mmgpio_pdata,
+	},
+};
+
+static void __init autcpu12_init(void)
+{
+	platform_device_register_simple("video-clps711x", 0, NULL, 0);
+	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
+					ARRAY_SIZE(autcpu12_cs8900_resource));
+	platform_device_register(&autcpu12_mmgpio_pdev);
+	platform_device_register(&autcpu12_nvram_pdev);
+}
+
+static void __init autcpu12_init_late(void)
+{
+	if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) {
+		/* We are need both drivers to handle NAND */
+		platform_device_register(&autcpu12_nand_pdev);
+	}
+}
+
+MACHINE_START(AUTCPU12, "autronix autcpu12")
+	/* Maintainer: Thomas Gleixner */
+	.atag_offset	= 0x20000,
+	.nr_irqs	= CLPS711X_NR_IRQS,
+	.map_io		= clps711x_map_io,
+	.init_irq	= clps711x_init_irq,
+	.init_time	= clps711x_timer_init,
+	.init_machine	= autcpu12_init,
+	.init_late	= autcpu12_init_late,
+	.handle_irq	= clps711x_handle_irq,
+	.restart	= clps711x_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
new file mode 100644
index 00000000..baab7da3
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -0,0 +1,147 @@
+/*
+ *  linux/arch/arm/mach-clps711x/cdb89712.c
+ *
+ *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <mach/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+#define CDB89712_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
+#define CDB89712_CS8900_IRQ	(IRQ_EINT3)
+
+static struct resource cdb89712_cs8900_resource[] __initdata = {
+	DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K),
+	DEFINE_RES_IRQ(CDB89712_CS8900_IRQ),
+};
+
+static struct mtd_partition cdb89712_flash_partitions[] __initdata = {
+	{
+		.name	= "Flash",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data cdb89712_flash_pdata __initdata = {
+	.width		= 4,
+	.probe_type	= "map_rom",
+	.parts		= cdb89712_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(cdb89712_flash_partitions),
+};
+
+static struct resource cdb89712_flash_resources[] __initdata = {
+	DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M),
+};
+
+static struct platform_device cdb89712_flash_pdev __initdata = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= cdb89712_flash_resources,
+	.num_resources	= ARRAY_SIZE(cdb89712_flash_resources),
+	.dev	= {
+		.platform_data	= &cdb89712_flash_pdata,
+	},
+};
+
+static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = {
+	{
+		.name	= "BootROM",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = {
+	.width		= 4,
+	.probe_type	= "map_rom",
+	.parts		= cdb89712_bootrom_partitions,
+	.nr_parts	= ARRAY_SIZE(cdb89712_bootrom_partitions),
+};
+
+static struct resource cdb89712_bootrom_resources[] __initdata = {
+	DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM |
+			 IORESOURCE_CACHEABLE | IORESOURCE_READONLY),
+};
+
+static struct platform_device cdb89712_bootrom_pdev __initdata = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.resource	= cdb89712_bootrom_resources,
+	.num_resources	= ARRAY_SIZE(cdb89712_bootrom_resources),
+	.dev	= {
+		.platform_data	= &cdb89712_bootrom_pdata,
+	},
+};
+
+static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = {
+	.bankwidth	= 4,
+};
+
+static struct resource cdb89712_sram_resources[] __initdata = {
+	DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE),
+};
+
+static struct platform_device cdb89712_sram_pdev __initdata = {
+	.name		= "mtd-ram",
+	.id		= 0,
+	.resource	= cdb89712_sram_resources,
+	.num_resources	= ARRAY_SIZE(cdb89712_sram_resources),
+	.dev	= {
+		.platform_data	= &cdb89712_sram_pdata,
+	},
+};
+
+static void __init cdb89712_init(void)
+{
+	platform_device_register(&cdb89712_flash_pdev);
+	platform_device_register(&cdb89712_bootrom_pdev);
+	platform_device_register(&cdb89712_sram_pdev);
+	platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource,
+					ARRAY_SIZE(cdb89712_cs8900_resource));
+}
+
+MACHINE_START(CDB89712, "Cirrus-CDB89712")
+	/* Maintainer: Ray Lehtiniemi */
+	.atag_offset	= 0x100,
+	.nr_irqs	= CLPS711X_NR_IRQS,
+	.map_io		= clps711x_map_io,
+	.init_irq	= clps711x_init_irq,
+	.init_time	= clps711x_timer_init,
+	.init_machine	= cdb89712_init,
+	.handle_irq	= clps711x_handle_irq,
+	.restart	= clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
new file mode 100644
index 00000000..014aa3c1
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -0,0 +1,46 @@
+/*
+ *  linux/arch/arm/mach-clps711x/clep7312.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static void __init
+fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks=1;
+	mi->bank[0].start = 0xc0000000;
+	mi->bank[0].size = 0x01000000;
+}
+
+MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
+	/* Maintainer: Nobody */
+	.atag_offset	= 0x0100,
+	.nr_irqs	= CLPS711X_NR_IRQS,
+	.fixup		= fixup_clep7312,
+	.map_io		= clps711x_map_io,
+	.init_irq	= clps711x_init_irq,
+	.init_time	= clps711x_timer_init,
+	.handle_irq	= clps711x_handle_irq,
+	.restart	= clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
new file mode 100644
index 00000000..5f928e9e
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -0,0 +1,180 @@
+/*
+ *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/memblock.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/setup.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/platform_lcd.h>
+
+#include <mach/hardware.h>
+
+#include "common.h"
+
+#define VIDEORAM_SIZE		SZ_128K
+
+#define EDB7211_LCD_DC_DC_EN	CLPS711X_GPIO(3, 1)
+#define EDB7211_LCDEN		CLPS711X_GPIO(3, 2)
+#define EDB7211_LCDBL		CLPS711X_GPIO(3, 3)
+
+#define EDB7211_FLASH0_BASE	(CS0_PHYS_BASE)
+#define EDB7211_FLASH1_BASE	(CS1_PHYS_BASE)
+#define EDB7211_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
+#define EDB7211_CS8900_IRQ	(IRQ_EINT3)
+
+static struct resource edb7211_cs8900_resource[] __initdata = {
+	DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
+	DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
+};
+
+static struct mtd_partition edb7211_flash_partitions[] __initdata = {
+	{
+		.name	= "Flash",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data edb7211_flash_pdata __initdata = {
+	.width		= 4,
+	.parts		= edb7211_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(edb7211_flash_partitions),
+};
+
+static struct resource edb7211_flash_resources[] __initdata = {
+	DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M),
+	DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M),
+};
+
+static struct platform_device edb7211_flash_pdev __initdata = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= edb7211_flash_resources,
+	.num_resources	= ARRAY_SIZE(edb7211_flash_resources),
+	.dev	= {
+		.platform_data	= &edb7211_flash_pdata,
+	},
+};
+
+static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	if (power) {
+		gpio_set_value(EDB7211_LCDEN, 1);
+		udelay(100);
+		gpio_set_value(EDB7211_LCD_DC_DC_EN, 1);
+	} else {
+		gpio_set_value(EDB7211_LCD_DC_DC_EN, 0);
+		udelay(100);
+		gpio_set_value(EDB7211_LCDEN, 0);
+	}
+}
+
+static struct plat_lcd_data edb7211_lcd_power_pdata = {
+	.set_power	= edb7211_lcd_power_set,
+};
+
+static void edb7211_lcd_backlight_set_intensity(int intensity)
+{
+	gpio_set_value(EDB7211_LCDBL, intensity);
+}
+
+static struct generic_bl_info edb7211_lcd_backlight_pdata = {
+	.name			= "lcd-backlight.0",
+	.default_intensity	= 0x01,
+	.max_intensity		= 0x01,
+	.set_bl_intensity	= edb7211_lcd_backlight_set_intensity,
+};
+
+static struct gpio edb7211_gpios[] __initconst = {
+	{ EDB7211_LCD_DC_DC_EN,	GPIOF_OUT_INIT_LOW,	"LCD DC-DC" },
+	{ EDB7211_LCDEN,	GPIOF_OUT_INIT_LOW,	"LCD POWER" },
+	{ EDB7211_LCDBL,	GPIOF_OUT_INIT_LOW,	"LCD BACKLIGHT" },
+};
+
+static struct map_desc edb7211_io_desc[] __initdata = {
+	{	/* Memory-mapped extra keyboard row */
+		.virtual	= IO_ADDRESS(EP7211_PHYS_EXTKBD),
+		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init edb7211_map_io(void)
+{
+	clps711x_map_io();
+	iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
+}
+
+/* Reserve screen memory region at the start of main system memory. */
+static void __init edb7211_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE);
+}
+
+static void __init
+fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	/*
+	 * Bank start addresses are not present in the information
+	 * passed in from the boot loader.  We could potentially
+	 * detect them, but instead we hard-code them.
+	 *
+	 * Banks sizes _are_ present in the param block, but we're
+	 * not using that information yet.
+	 */
+	mi->bank[0].start = 0xc0000000;
+	mi->bank[0].size = SZ_8M;
+	mi->bank[1].start = 0xc1000000;
+	mi->bank[1].size = SZ_8M;
+	mi->nr_banks = 2;
+}
+
+static void __init edb7211_init(void)
+{
+	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
+
+	platform_device_register(&edb7211_flash_pdev);
+	platform_device_register_data(&platform_bus, "platform-lcd", 0,
+				      &edb7211_lcd_power_pdata,
+				      sizeof(edb7211_lcd_power_pdata));
+	platform_device_register_data(&platform_bus, "generic-bl", 0,
+				      &edb7211_lcd_backlight_pdata,
+				      sizeof(edb7211_lcd_backlight_pdata));
+	platform_device_register_simple("video-clps711x", 0, NULL, 0);
+	platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
+					ARRAY_SIZE(edb7211_cs8900_resource));
+}
+
+MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
+	/* Maintainer: Jon McClintock */
+	.atag_offset	= VIDEORAM_SIZE + 0x100,
+	.nr_irqs	= CLPS711X_NR_IRQS,
+	.fixup		= fixup_edb7211,
+	.reserve	= edb7211_reserve,
+	.map_io		= edb7211_map_io,
+	.init_irq	= clps711x_init_irq,
+	.init_time	= clps711x_timer_init,
+	.init_machine	= edb7211_init,
+	.handle_irq	= clps711x_handle_irq,
+	.restart	= clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c
new file mode 100644
index 00000000..c5675efc
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-fortunet.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-clps711x/fortunet.c
+ *
+ *  Derived from linux/arch/arm/mach-integrator/arch.c
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+
+#include <asm/memory.h>
+
+#include "common.h"
+
+struct meminfo memmap = {
+	.nr_banks	= 1,
+	.bank		= {
+		{
+			.start	= 0xC0000000,
+			.size	= 0x01000000,
+		},
+	},
+};
+
+typedef struct tag_IMAGE_PARAMS
+{
+	int	ramdisk_ok;
+	int	ramdisk_address;
+	int	ramdisk_size;
+	int	ram_size;
+	int	extra_param_type;
+	int	extra_param_ptr;
+	int	command_line;
+} IMAGE_PARAMS;
+
+#define IMAGE_PARAMS_PHYS	0xC01F0000
+
+static void __init
+fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
+	*cmdline = phys_to_virt(ip->command_line);
+#ifdef CONFIG_BLK_DEV_INITRD
+	if(ip->ramdisk_ok)
+	{
+		initrd_start = __phys_to_virt(ip->ramdisk_address);
+		initrd_end = initrd_start + ip->ramdisk_size;
+	}
+#endif
+	memmap.bank[0].size = ip->ram_size;
+	*mi = memmap;
+}
+
+MACHINE_START(FORTUNET, "ARM-FortuNet")
+	/* Maintainer: FortuNet Inc. */
+	.nr_irqs	= CLPS711X_NR_IRQS,
+	.fixup		= fortunet_fixup,
+	.map_io		= clps711x_map_io,
+	.init_irq	= clps711x_init_irq,
+	.init_time	= clps711x_timer_init,
+	.handle_irq	= clps711x_handle_irq,
+	.restart	= clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
new file mode 100644
index 00000000..8d3ee677
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -0,0 +1,232 @@
+/*
+ *  linux/arch/arm/mach-clps711x/p720t.c
+ *
+ *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/sizes.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand-gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/syspld.h>
+
+#include <video/platform_lcd.h>
+
+#include "common.h"
+
+#define P720T_USERLED		CLPS711X_GPIO(3, 0)
+#define P720T_NAND_CLE		CLPS711X_GPIO(4, 0)
+#define P720T_NAND_ALE		CLPS711X_GPIO(4, 1)
+#define P720T_NAND_NCE		CLPS711X_GPIO(4, 2)
+
+#define P720T_NAND_BASE		(CLPS711X_SDRAM1_BASE)
+
+static struct resource p720t_nand_resource[] __initdata = {
+	DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4),
+};
+
+static struct mtd_partition p720t_nand_parts[] __initdata = {
+	{
+		.name	= "Flash partition 1",
+		.offset	= 0,
+		.size	= SZ_2M,
+	},
+	{
+		.name	= "Flash partition 2",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct gpio_nand_platdata p720t_nand_pdata __initdata = {
+	.gpio_rdy	= -1,
+	.gpio_nce	= P720T_NAND_NCE,
+	.gpio_ale	= P720T_NAND_ALE,
+	.gpio_cle	= P720T_NAND_CLE,
+	.gpio_nwp	= -1,
+	.chip_delay	= 15,
+	.parts		= p720t_nand_parts,
+	.num_parts	= ARRAY_SIZE(p720t_nand_parts),
+};
+
+static struct platform_device p720t_nand_pdev __initdata = {
+	.name		= "gpio-nand",
+	.id		= -1,
+	.resource	= p720t_nand_resource,
+	.num_resources	= ARRAY_SIZE(p720t_nand_resource),
+	.dev		= {
+		.platform_data = &p720t_nand_pdata,
+	},
+};
+
+static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	if (power) {
+		PLD_LCDEN = PLD_LCDEN_EN;
+		PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON;
+	} else {
+		PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON);
+		PLD_LCDEN = 0;
+	}
+}
+
+static struct plat_lcd_data p720t_lcd_power_pdata = {
+	.set_power	= p720t_lcd_power_set,
+};
+
+static void p720t_lcd_backlight_set_intensity(int intensity)
+{
+	if (intensity)
+		PLD_PWR |= PLD_S3_ON;
+	else
+		PLD_PWR = 0;
+}
+
+static struct generic_bl_info p720t_lcd_backlight_pdata = {
+	.name			= "lcd-backlight.0",
+	.default_intensity	= 0x01,
+	.max_intensity		= 0x01,
+	.set_bl_intensity	= p720t_lcd_backlight_set_intensity,
+};
+
+/*
+ * Map the P720T system PLD. It occupies two address spaces:
+ * 0x10000000 and 0x10400000. We map both regions as one.
+ */
+static struct map_desc p720t_io_desc[] __initdata = {
+	{
+		.virtual	= SYSPLD_VIRT_BASE,
+		.pfn		= __phys_to_pfn(SYSPLD_PHYS_BASE),
+		.length		= SZ_8M,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init
+fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
+{
+	/*
+	 * Our bootloader doesn't setup any tags (yet).
+	 */
+	if (tag->hdr.tag != ATAG_CORE) {
+		tag->hdr.tag = ATAG_CORE;
+		tag->hdr.size = tag_size(tag_core);
+		tag->u.core.flags = 0;
+		tag->u.core.pagesize = PAGE_SIZE;
+		tag->u.core.rootdev = 0x0100;
+
+		tag = tag_next(tag);
+		tag->hdr.tag = ATAG_MEM;
+		tag->hdr.size = tag_size(tag_mem32);
+		tag->u.mem.size = 4096;
+		tag->u.mem.start = PHYS_OFFSET;
+
+		tag = tag_next(tag);
+		tag->hdr.tag = ATAG_NONE;
+		tag->hdr.size = 0;
+	}
+}
+
+static void __init p720t_map_io(void)
+{
+	clps711x_map_io();
+	iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
+}
+
+static void __init p720t_init_early(void)
+{
+	/*
+	 * Power down as much as possible in case we don't
+	 * have the drivers loaded.
+	 */
+	PLD_LCDEN = 0;
+	PLD_PWR  &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON);
+
+	PLD_KBD   = 0;
+	PLD_IO    = 0;
+	PLD_IRDA  = 0;
+	PLD_CODEC = 0;
+	PLD_TCH   = 0;
+	PLD_SPI   = 0;
+	if (!IS_ENABLED(CONFIG_DEBUG_LL)) {
+		PLD_COM2 = 0;
+		PLD_COM1 = 0;
+	}
+}
+
+static struct gpio_led p720t_gpio_leds[] = {
+	{
+		.name			= "User LED",
+		.default_trigger	= "heartbeat",
+		.gpio			= P720T_USERLED,
+	},
+};
+
+static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
+	.leds		= p720t_gpio_leds,
+	.num_leds	= ARRAY_SIZE(p720t_gpio_leds),
+};
+
+static void __init p720t_init(void)
+{
+	platform_device_register(&p720t_nand_pdev);
+	platform_device_register_data(&platform_bus, "platform-lcd", 0,
+				      &p720t_lcd_power_pdata,
+				      sizeof(p720t_lcd_power_pdata));
+	platform_device_register_data(&platform_bus, "generic-bl", 0,
+				      &p720t_lcd_backlight_pdata,
+				      sizeof(p720t_lcd_backlight_pdata));
+	platform_device_register_simple("video-clps711x", 0, NULL, 0);
+}
+
+static void __init p720t_init_late(void)
+{
+	platform_device_register_data(&platform_bus, "leds-gpio", 0,
+				      &p720t_gpio_led_pdata,
+				      sizeof(p720t_gpio_led_pdata));
+}
+
+MACHINE_START(P720T, "ARM-Prospector720T")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.atag_offset	= 0x100,
+	.nr_irqs	= CLPS711X_NR_IRQS,
+	.fixup		= fixup_p720t,
+	.map_io		= p720t_map_io,
+	.init_early	= p720t_init_early,
+	.init_irq	= clps711x_init_irq,
+	.init_time	= clps711x_timer_init,
+	.init_machine	= p720t_init,
+	.init_late	= p720t_init_late,
+	.handle_irq	= clps711x_handle_irq,
+	.restart	= clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
new file mode 100644
index 00000000..20ff50f3
--- /dev/null
+++ b/arch/arm/mach-clps711x/common.c
@@ -0,0 +1,367 @@
+/*
+ *  linux/arch/arm/mach-clps711x/core.c
+ *
+ *  Core support for the CLPS711x-based machines.
+ *
+ *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/sizes.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clockchips.h>
+#include <linux/clk-provider.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/system_misc.h>
+
+#include <mach/hardware.h>
+
+static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
+		  *clk_tint, *clk_spi;
+
+/*
+ * This maps the generic CLPS711x registers
+ */
+static struct map_desc clps711x_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
+		.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init clps711x_map_io(void)
+{
+	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
+}
+
+static void int1_mask(struct irq_data *d)
+{
+	u32 intmr1;
+
+	intmr1 = clps_readl(INTMR1);
+	intmr1 &= ~(1 << d->irq);
+	clps_writel(intmr1, INTMR1);
+}
+
+static void int1_eoi(struct irq_data *d)
+{
+	switch (d->irq) {
+	case IRQ_CSINT:  clps_writel(0, COEOI);  break;
+	case IRQ_TC1OI:  clps_writel(0, TC1EOI); break;
+	case IRQ_TC2OI:  clps_writel(0, TC2EOI); break;
+	case IRQ_RTCMI:  clps_writel(0, RTCEOI); break;
+	case IRQ_TINT:   clps_writel(0, TEOI);   break;
+	case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
+	}
+}
+
+static void int1_unmask(struct irq_data *d)
+{
+	u32 intmr1;
+
+	intmr1 = clps_readl(INTMR1);
+	intmr1 |= 1 << d->irq;
+	clps_writel(intmr1, INTMR1);
+}
+
+static struct irq_chip int1_chip = {
+	.name		= "Interrupt Vector 1",
+	.irq_eoi	= int1_eoi,
+	.irq_mask	= int1_mask,
+	.irq_unmask	= int1_unmask,
+};
+
+static void int2_mask(struct irq_data *d)
+{
+	u32 intmr2;
+
+	intmr2 = clps_readl(INTMR2);
+	intmr2 &= ~(1 << (d->irq - 16));
+	clps_writel(intmr2, INTMR2);
+}
+
+static void int2_eoi(struct irq_data *d)
+{
+	switch (d->irq) {
+	case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
+	}
+}
+
+static void int2_unmask(struct irq_data *d)
+{
+	u32 intmr2;
+
+	intmr2 = clps_readl(INTMR2);
+	intmr2 |= 1 << (d->irq - 16);
+	clps_writel(intmr2, INTMR2);
+}
+
+static struct irq_chip int2_chip = {
+	.name		= "Interrupt Vector 2",
+	.irq_eoi	= int2_eoi,
+	.irq_mask	= int2_mask,
+	.irq_unmask	= int2_unmask,
+};
+
+static void int3_mask(struct irq_data *d)
+{
+	u32 intmr3;
+
+	intmr3 = clps_readl(INTMR3);
+	intmr3 &= ~(1 << (d->irq - 32));
+	clps_writel(intmr3, INTMR3);
+}
+
+static void int3_unmask(struct irq_data *d)
+{
+	u32 intmr3;
+
+	intmr3 = clps_readl(INTMR3);
+	intmr3 |= 1 << (d->irq - 32);
+	clps_writel(intmr3, INTMR3);
+}
+
+static struct irq_chip int3_chip = {
+	.name		= "Interrupt Vector 3",
+	.irq_mask	= int3_mask,
+	.irq_unmask	= int3_unmask,
+};
+
+static struct {
+	int			nr;
+	struct irq_chip		*chip;
+	irq_flow_handler_t	handle;
+} clps711x_irqdescs[] __initdata = {
+	{ IRQ_CSINT,	&int1_chip,	handle_fasteoi_irq,	},
+	{ IRQ_EINT1,	&int1_chip,	handle_level_irq,	},
+	{ IRQ_EINT2,	&int1_chip,	handle_level_irq,	},
+	{ IRQ_EINT3,	&int1_chip,	handle_level_irq,	},
+	{ IRQ_TC1OI,	&int1_chip,	handle_fasteoi_irq,	},
+	{ IRQ_TC2OI,	&int1_chip,	handle_fasteoi_irq,	},
+	{ IRQ_RTCMI,	&int1_chip,	handle_fasteoi_irq,	},
+	{ IRQ_TINT,	&int1_chip,	handle_fasteoi_irq,	},
+	{ IRQ_UTXINT1,	&int1_chip,	handle_level_irq,	},
+	{ IRQ_URXINT1,	&int1_chip,	handle_level_irq,	},
+	{ IRQ_UMSINT,	&int1_chip,	handle_fasteoi_irq,	},
+	{ IRQ_SSEOTI,	&int1_chip,	handle_level_irq,	},
+	{ IRQ_KBDINT,	&int2_chip,	handle_fasteoi_irq,	},
+	{ IRQ_SS2RX,	&int2_chip,	handle_level_irq,	},
+	{ IRQ_SS2TX,	&int2_chip,	handle_level_irq,	},
+	{ IRQ_UTXINT2,	&int2_chip,	handle_level_irq,	},
+	{ IRQ_URXINT2,	&int2_chip,	handle_level_irq,	},
+};
+
+void __init clps711x_init_irq(void)
+{
+	unsigned int i;
+
+	/* Disable interrupts */
+	clps_writel(0, INTMR1);
+	clps_writel(0, INTMR2);
+	clps_writel(0, INTMR3);
+
+	/* Clear down any pending interrupts */
+	clps_writel(0, BLEOI);
+	clps_writel(0, MCEOI);
+	clps_writel(0, COEOI);
+	clps_writel(0, TC1EOI);
+	clps_writel(0, TC2EOI);
+	clps_writel(0, RTCEOI);
+	clps_writel(0, TEOI);
+	clps_writel(0, UMSEOI);
+	clps_writel(0, KBDEOI);
+	clps_writel(0, SRXEOF);
+	clps_writel(0xffffffff, DAISR);
+
+	for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) {
+		irq_set_chip_and_handler(clps711x_irqdescs[i].nr,
+					 clps711x_irqdescs[i].chip,
+					 clps711x_irqdescs[i].handle);
+		set_irq_flags(clps711x_irqdescs[i].nr,
+			      IRQF_VALID | IRQF_PROBE);
+	}
+
+	if (IS_ENABLED(CONFIG_FIQ)) {
+		init_FIQ(0);
+		irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip,
+					 handle_bad_irq);
+		set_irq_flags(IRQ_DAIINT,
+			      IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+	}
+}
+
+inline u32 fls16(u32 x)
+{
+	u32 r = 15;
+
+	if (!(x & 0xff00)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf000)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc000)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x8000))
+		r--;
+
+	return r;
+}
+
+asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat;
+	void __iomem *base = CLPS711X_VIRT_BASE;
+
+	irqstat = readl_relaxed(base + INTSR1) & readl_relaxed(base + INTMR1);
+	if (irqstat) {
+		handle_IRQ(fls16(irqstat), regs);
+		return;
+	}
+
+	irqstat = readl_relaxed(base + INTSR2) & readl_relaxed(base + INTMR2);
+	if (likely(irqstat))
+		handle_IRQ(fls16(irqstat) + 16, regs);
+}
+
+static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
+					 struct clock_event_device *evt)
+{
+}
+
+static struct clock_event_device clockevent_clps711x = {
+	.name		= "CLPS711x Clockevents",
+	.rating		= 300,
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.set_mode	= clps711x_clockevent_set_mode,
+};
+
+static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
+{
+	clockevent_clps711x.event_handler(&clockevent_clps711x);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction clps711x_timer_irq = {
+	.name		= "CLPS711x Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= clps711x_timer_interrupt,
+};
+
+static void add_fixed_clk(struct clk *clk, const char *name, int rate)
+{
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	clk_register_clkdev(clk, name, NULL);
+}
+
+void __init clps711x_timer_init(void)
+{
+	int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
+	u32 tmp;
+
+	osc = 3686400;
+	ext = 13000000;
+
+	tmp = clps_readl(PLLR) >> 24;
+	if (tmp)
+		pll = (osc * tmp) / 2;
+	else
+		pll = 73728000; /* Default value */
+
+	tmp = clps_readl(SYSFLG2);
+	if (tmp & SYSFLG2_CKMODE) {
+		cpu = ext;
+		bus = cpu;
+		spi = 135400;
+	} else {
+		cpu = pll;
+		if (cpu >= 36864000)
+			bus = cpu / 2;
+		else
+			bus = 36864000 / 2;
+		spi = cpu / 576;
+	}
+
+	uart = bus / 10;
+
+	if (tmp & SYSFLG2_CKMODE) {
+		tmp = clps_readl(SYSCON2);
+		if (tmp & SYSCON2_OSTB)
+			timh = ext / 26;
+		else
+			timh = 541440;
+	} else
+		timh = cpu / 144;
+
+	timl = timh / 256;
+
+	/* All clocks are fixed */
+	add_fixed_clk(clk_pll, "pll", pll);
+	add_fixed_clk(clk_bus, "bus", bus);
+	add_fixed_clk(clk_uart, "uart", uart);
+	add_fixed_clk(clk_timerl, "timer_lf", timl);
+	add_fixed_clk(clk_timerh, "timer_hf", timh);
+	add_fixed_clk(clk_tint, "tint", 64);
+	add_fixed_clk(clk_spi, "spi", spi);
+
+	pr_info("CPU frequency set at %i Hz.\n", cpu);
+
+	clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D);
+
+	tmp = clps_readl(SYSCON1);
+	tmp |= SYSCON1_TC2S | SYSCON1_TC2M;
+	clps_writel(tmp, SYSCON1);
+
+	clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff);
+
+	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+}
+
+void clps711x_restart(char mode, const char *cmd)
+{
+	soft_restart(0);
+}
+
+static void clps711x_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov    r0, r0\n\
+	mov     r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+	arm_pm_idle = clps711x_idle;
+	return 0;
+}
+
+arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
new file mode 100644
index 00000000..f84a7292
--- /dev/null
+++ b/arch/arm/mach-clps711x/common.h
@@ -0,0 +1,15 @@
+/*
+ * linux/arch/arm/mach-clps711x/common.h
+ *
+ * Common bits.
+ */
+
+#define CLPS711X_NR_IRQS	(33)
+#define CLPS711X_NR_GPIO	(4 * 8 + 3)
+#define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
+
+extern void clps711x_map_io(void);
+extern void clps711x_init_irq(void);
+extern void clps711x_timer_init(void);
+extern void clps711x_handle_irq(struct pt_regs *regs);
+extern void clps711x_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
new file mode 100644
index 00000000..0452f5f3
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -0,0 +1,59 @@
+/*
+ * AUTCPU12 specific defines
+ *
+ * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_AUTCPU12_H
+#define __ASM_ARCH_AUTCPU12_H
+
+/*
+ * The flash bank is wired to chip select 0
+ */
+#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
+
+/* offset for device specific information structure */
+#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
+
+/* Videomemory in the internal SRAM (CS 6) */
+#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
+
+/*
+* All special IO's are tied to CS1
+*/
+#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
+
+#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
+
+#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
+
+#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
+
+#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
+
+#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
+
+#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
+
+/*
+* defines for lcd contrast 
+*/
+#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
+#define	AUTCPU12_DPOT_CS		(1<<0)
+#define AUTCPU12_DPOT_CLK    		(1<<1)
+#define	AUTCPU12_DPOT_UD		(1<<2)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
new file mode 100644
index 00000000..01d1b955
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -0,0 +1,304 @@
+/*
+ *  This file contains the hardware definitions of the Cirrus Logic
+ *  ARM7 CLPS711X internal registers.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __MACH_CLPS711X_H
+#define __MACH_CLPS711X_H
+
+#define CLPS711X_PHYS_BASE	(0x80000000)
+
+#define PADR		(0x0000)
+#define PBDR		(0x0001)
+#define PCDR		(0x0002)
+#define PDDR		(0x0003)
+#define PADDR		(0x0040)
+#define PBDDR		(0x0041)
+#define PCDDR		(0x0042)
+#define PDDDR		(0x0043)
+#define PEDR		(0x0083)
+#define PEDDR		(0x00c3)
+#define SYSCON1		(0x0100)
+#define SYSFLG1		(0x0140)
+#define MEMCFG1		(0x0180)
+#define MEMCFG2		(0x01c0)
+#define DRFPR		(0x0200)
+#define INTSR1		(0x0240)
+#define INTMR1		(0x0280)
+#define LCDCON		(0x02c0)
+#define TC1D		(0x0300)
+#define TC2D		(0x0340)
+#define RTCDR		(0x0380)
+#define RTCMR		(0x03c0)
+#define PMPCON		(0x0400)
+#define CODR		(0x0440)
+#define UARTDR1		(0x0480)
+#define UBRLCR1		(0x04c0)
+#define SYNCIO		(0x0500)
+#define PALLSW		(0x0540)
+#define PALMSW		(0x0580)
+#define STFCLR		(0x05c0)
+#define BLEOI		(0x0600)
+#define MCEOI		(0x0640)
+#define TEOI		(0x0680)
+#define TC1EOI		(0x06c0)
+#define TC2EOI		(0x0700)
+#define RTCEOI		(0x0740)
+#define UMSEOI		(0x0780)
+#define COEOI		(0x07c0)
+#define HALT		(0x0800)
+#define STDBY		(0x0840)
+
+#define FBADDR		(0x1000)
+#define SYSCON2		(0x1100)
+#define SYSFLG2		(0x1140)
+#define INTSR2		(0x1240)
+#define INTMR2		(0x1280)
+#define UARTDR2		(0x1480)
+#define UBRLCR2		(0x14c0)
+#define SS2DR		(0x1500)
+#define SRXEOF		(0x1600)
+#define SS2POP		(0x16c0)
+#define KBDEOI		(0x1700)
+
+#define DAIR		(0x2000)
+#define DAIDR0		(0x2040)
+#define DAIDR1		(0x2080)
+#define DAIDR2		(0x20c0)
+#define DAISR		(0x2100)
+#define SYSCON3		(0x2200)
+#define INTSR3		(0x2240)
+#define INTMR3		(0x2280)
+#define LEDFLSH		(0x22c0)
+#define SDCONF		(0x2300)
+#define SDRFPR		(0x2340)
+#define UNIQID		(0x2440)
+#define DAI64FS		(0x2600)
+#define PLLW		(0x2610)
+#define PLLR		(0xa5a8)
+#define RANDID0		(0x2700)
+#define RANDID1		(0x2704)
+#define RANDID2		(0x2708)
+#define RANDID3		(0x270c)
+
+/* common bits: SYSCON1 / SYSCON2 */
+#define SYSCON_UARTEN		(1 << 8)
+
+#define SYSCON1_KBDSCAN(x)	((x) & 15)
+#define SYSCON1_KBDSCANMASK	(15)
+#define SYSCON1_TC1M		(1 << 4)
+#define SYSCON1_TC1S		(1 << 5)
+#define SYSCON1_TC2M		(1 << 6)
+#define SYSCON1_TC2S		(1 << 7)
+#define SYSCON1_UART1EN		SYSCON_UARTEN
+#define SYSCON1_BZTOG		(1 << 9)
+#define SYSCON1_BZMOD		(1 << 10)
+#define SYSCON1_DBGEN		(1 << 11)
+#define SYSCON1_LCDEN		(1 << 12)
+#define SYSCON1_CDENTX		(1 << 13)
+#define SYSCON1_CDENRX		(1 << 14)
+#define SYSCON1_SIREN		(1 << 15)
+#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
+#define SYSCON1_ADCKSEL_MASK	(3 << 16)
+#define SYSCON1_EXCKEN		(1 << 18)
+#define SYSCON1_WAKEDIS		(1 << 19)
+#define SYSCON1_IRTXM		(1 << 20)
+
+/* common bits: SYSFLG1 / SYSFLG2 */
+#define SYSFLG_UBUSY		(1 << 11)
+#define SYSFLG_URXFE		(1 << 22)
+#define SYSFLG_UTXFF		(1 << 23)
+
+#define SYSFLG1_MCDR		(1 << 0)
+#define SYSFLG1_DCDET		(1 << 1)
+#define SYSFLG1_WUDR		(1 << 2)
+#define SYSFLG1_WUON		(1 << 3)
+#define SYSFLG1_CTS		(1 << 8)
+#define SYSFLG1_DSR		(1 << 9)
+#define SYSFLG1_DCD		(1 << 10)
+#define SYSFLG1_UBUSY		SYSFLG_UBUSY
+#define SYSFLG1_NBFLG		(1 << 12)
+#define SYSFLG1_RSTFLG		(1 << 13)
+#define SYSFLG1_PFFLG		(1 << 14)
+#define SYSFLG1_CLDFLG		(1 << 15)
+#define SYSFLG1_URXFE		SYSFLG_URXFE
+#define SYSFLG1_UTXFF		SYSFLG_UTXFF
+#define SYSFLG1_CRXFE		(1 << 24)
+#define SYSFLG1_CTXFF		(1 << 25)
+#define SYSFLG1_SSIBUSY		(1 << 26)
+#define SYSFLG1_ID		(1 << 29)
+#define SYSFLG1_VERID(x)	(((x) >> 30) & 3)
+#define SYSFLG1_VERID_MASK	(3 << 30)
+
+#define SYSFLG2_SSRXOF		(1 << 0)
+#define SYSFLG2_RESVAL		(1 << 1)
+#define SYSFLG2_RESFRM		(1 << 2)
+#define SYSFLG2_SS2RXFE		(1 << 3)
+#define SYSFLG2_SS2TXFF		(1 << 4)
+#define SYSFLG2_SS2TXUF		(1 << 5)
+#define SYSFLG2_CKMODE		(1 << 6)
+#define SYSFLG2_UBUSY		SYSFLG_UBUSY
+#define SYSFLG2_URXFE		SYSFLG_URXFE
+#define SYSFLG2_UTXFF		SYSFLG_UTXFF
+
+#define LCDCON_GSEN		(1 << 30)
+#define LCDCON_GSMD		(1 << 31)
+
+#define SYSCON2_SERSEL		(1 << 0)
+#define SYSCON2_KBD6		(1 << 1)
+#define SYSCON2_DRAMZ		(1 << 2)
+#define SYSCON2_KBWEN		(1 << 3)
+#define SYSCON2_SS2TXEN		(1 << 4)
+#define SYSCON2_PCCARD1		(1 << 5)
+#define SYSCON2_PCCARD2		(1 << 6)
+#define SYSCON2_SS2RXEN		(1 << 7)
+#define SYSCON2_UART2EN		SYSCON_UARTEN
+#define SYSCON2_SS2MAEN		(1 << 9)
+#define SYSCON2_OSTB		(1 << 12)
+#define SYSCON2_CLKENSL		(1 << 13)
+#define SYSCON2_BUZFREQ		(1 << 14)
+
+/* common bits: UARTDR1 / UARTDR2 */
+#define UARTDR_FRMERR		(1 << 8)
+#define UARTDR_PARERR		(1 << 9)
+#define UARTDR_OVERR		(1 << 10)
+
+/* common bits: UBRLCR1 / UBRLCR2 */
+#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
+#define UBRLCR_BREAK		(1 << 12)
+#define UBRLCR_PRTEN		(1 << 13)
+#define UBRLCR_EVENPRT		(1 << 14)
+#define UBRLCR_XSTOP		(1 << 15)
+#define UBRLCR_FIFOEN		(1 << 16)
+#define UBRLCR_WRDLEN5		(0 << 17)
+#define UBRLCR_WRDLEN6		(1 << 17)
+#define UBRLCR_WRDLEN7		(2 << 17)
+#define UBRLCR_WRDLEN8		(3 << 17)
+#define UBRLCR_WRDLEN_MASK	(3 << 17)
+
+#define SYNCIO_FRMLEN(x)	(((x) & 0x1f) << 8)
+#define SYNCIO_SMCKEN		(1 << 13)
+#define SYNCIO_TXFRMEN		(1 << 14)
+
+#define DAIR_RESERVED		(0x0404)
+#define DAIR_DAIEN		(1 << 16)
+#define DAIR_ECS		(1 << 17)
+#define DAIR_LCTM		(1 << 19)
+#define DAIR_LCRM		(1 << 20)
+#define DAIR_RCTM		(1 << 21)
+#define DAIR_RCRM		(1 << 22)
+#define DAIR_LBM		(1 << 23)
+
+#define DAIDR2_FIFOEN		(1 << 15)
+#define DAIDR2_FIFOLEFT		(0x0d << 16)
+#define DAIDR2_FIFORIGHT	(0x11 << 16)
+
+#define DAISR_RCTS		(1 << 0)
+#define DAISR_RCRS		(1 << 1)
+#define DAISR_LCTS		(1 << 2)
+#define DAISR_LCRS		(1 << 3)
+#define DAISR_RCTU		(1 << 4)
+#define DAISR_RCRO		(1 << 5)
+#define DAISR_LCTU		(1 << 6)
+#define DAISR_LCRO		(1 << 7)
+#define DAISR_RCNF		(1 << 8)
+#define DAISR_RCNE		(1 << 9)
+#define DAISR_LCNF		(1 << 10)
+#define DAISR_LCNE		(1 << 11)
+#define DAISR_FIFO		(1 << 12)
+
+#define DAI64FS_I2SF64		(1 << 0)
+#define DAI64FS_AUDIOCLKEN	(1 << 1)
+#define DAI64FS_AUDIOCLKSRC	(1 << 2)
+#define DAI64FS_MCLK256EN	(1 << 3)
+#define DAI64FS_LOOPBACK	(1 << 5)
+
+#define SYSCON3_ADCCON		(1 << 0)
+#define SYSCON3_CLKCTL0		(1 << 1)
+#define SYSCON3_CLKCTL1		(1 << 2)
+#define SYSCON3_DAISEL		(1 << 3)
+#define SYSCON3_ADCCKNSEN	(1 << 4)
+#define SYSCON3_VERSN(x)	(((x) >> 5) & 7)
+#define SYSCON3_VERSN_MASK	(7 << 5)
+#define SYSCON3_FASTWAKE	(1 << 8)
+#define SYSCON3_DAIEN		(1 << 9)
+#define SYSCON3_128FS		SYSCON3_DAIEN
+#define SYSCON3_ENPD67		(1 << 10)
+
+#define SDCONF_ACTIVE		(1 << 10)
+#define SDCONF_CLKCTL		(1 << 9)
+#define SDCONF_WIDTH_4		(0 << 7)
+#define SDCONF_WIDTH_8		(1 << 7)
+#define SDCONF_WIDTH_16		(2 << 7)
+#define SDCONF_WIDTH_32		(3 << 7)
+#define SDCONF_SIZE_16		(0 << 5)
+#define SDCONF_SIZE_64		(1 << 5)
+#define SDCONF_SIZE_128		(2 << 5)
+#define SDCONF_SIZE_256		(3 << 5)
+#define SDCONF_CASLAT_2		(2)
+#define SDCONF_CASLAT_3		(3)
+
+#define MEMCFG_BUS_WIDTH_32	(1)
+#define MEMCFG_BUS_WIDTH_16	(0)
+#define MEMCFG_BUS_WIDTH_8	(3)
+
+#define MEMCFG_SQAEN		(1 << 6)
+#define MEMCFG_CLKENB		(1 << 7)
+
+#define MEMCFG_WAITSTATE_8_3	(0 << 2)
+#define MEMCFG_WAITSTATE_7_3	(1 << 2)
+#define MEMCFG_WAITSTATE_6_3	(2 << 2)
+#define MEMCFG_WAITSTATE_5_3	(3 << 2)
+#define MEMCFG_WAITSTATE_4_2	(4 << 2)
+#define MEMCFG_WAITSTATE_3_2	(5 << 2)
+#define MEMCFG_WAITSTATE_2_2	(6 << 2)
+#define MEMCFG_WAITSTATE_1_2	(7 << 2)
+#define MEMCFG_WAITSTATE_8_1	(8 << 2)
+#define MEMCFG_WAITSTATE_7_1	(9 << 2)
+#define MEMCFG_WAITSTATE_6_1	(10 << 2)
+#define MEMCFG_WAITSTATE_5_1	(11 << 2)
+#define MEMCFG_WAITSTATE_4_0	(12 << 2)
+#define MEMCFG_WAITSTATE_3_0	(13 << 2)
+#define MEMCFG_WAITSTATE_2_0	(14 << 2)
+#define MEMCFG_WAITSTATE_1_0	(15 << 2)
+
+/* INTSR1 Interrupts */
+#define IRQ_CSINT		(4)
+#define IRQ_EINT1		(5)
+#define IRQ_EINT2		(6)
+#define IRQ_EINT3		(7)
+#define IRQ_TC1OI		(8)
+#define IRQ_TC2OI		(9)
+#define IRQ_RTCMI		(10)
+#define IRQ_TINT		(11)
+#define IRQ_UTXINT1		(12)
+#define IRQ_URXINT1		(13)
+#define IRQ_UMSINT		(14)
+#define IRQ_SSEOTI		(15)
+
+/* INTSR2 Interrupts */
+#define IRQ_KBDINT		(16 + 0)
+#define IRQ_SS2RX		(16 + 1)
+#define IRQ_SS2TX		(16 + 2)
+#define IRQ_UTXINT2		(16 + 12)
+#define IRQ_URXINT2		(16 + 13)
+
+/* INTSR3 Interrupts */
+#define IRQ_DAIINT		(32 + 0)
+
+#endif /* __MACH_CLPS711X_H */
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
new file mode 100644
index 00000000..cb3684f8
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/hardware.h>
+
+		.macro	addruart, rp, rv, tmp
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+		mov	\rp, #0x0000	@ UART1
+#else
+		mov	\rp, #0x1000	@ UART2
+#endif
+		orr	\rv, \rp, #CLPS711X_VIRT_BASE
+		orr	\rp, \rp, #CLPS711X_PHYS_BASE
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0480]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 11		@ UBUSYx
+		bne	1001b
+		.endm
+
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
new file mode 100644
index 00000000..2f23dd5d
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -0,0 +1,80 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Prospector P720T.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#include <mach/clps711x.h>
+
+#define IO_ADDRESS(x)		(0xdc000000 + (((x) & 0x03ffffff) | \
+				(((x) >> 2) & 0x3c000000)))
+
+#define CLPS711X_VIRT_BASE	IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE))
+
+#ifndef __ASSEMBLY__
+#define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))
+#define clps_readw(off)		readw(CLPS711X_VIRT_BASE + (off))
+#define clps_readl(off)		readl(CLPS711X_VIRT_BASE + (off))
+#define clps_writeb(val,off)	writeb(val, CLPS711X_VIRT_BASE + (off))
+#define clps_writew(val,off)	writew(val, CLPS711X_VIRT_BASE + (off))
+#define clps_writel(val,off)	writel(val, CLPS711X_VIRT_BASE + (off))
+#endif
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE		(0x00000000)
+#define CS1_PHYS_BASE		(0x10000000)
+#define CS2_PHYS_BASE		(0x20000000)
+#define CS3_PHYS_BASE		(0x30000000)
+#define CS4_PHYS_BASE		(0x40000000)
+#define CS5_PHYS_BASE		(0x50000000)
+#define CS6_PHYS_BASE		(0x60000000)
+#define CS7_PHYS_BASE		(0x70000000)
+#else
+#define CS0_PHYS_BASE		(0x70000000)
+#define CS1_PHYS_BASE		(0x60000000)
+#define CS2_PHYS_BASE		(0x50000000)
+#define CS3_PHYS_BASE		(0x40000000)
+#define CS4_PHYS_BASE		(0x30000000)
+#define CS5_PHYS_BASE		(0x20000000)
+#define CS6_PHYS_BASE		(0x10000000)
+#define CS7_PHYS_BASE		(0x00000000)
+#endif
+
+#define CLPS711X_SRAM_BASE	CS6_PHYS_BASE
+#define CLPS711X_SRAM_SIZE	(48 * 1024)
+
+#define CLPS711X_SDRAM0_BASE	(0xc0000000)
+#define CLPS711X_SDRAM1_BASE	(0xd0000000)
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */
+#define EP7211_PHYS_EXTKBD	CS3_PHYS_BASE
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
new file mode 100644
index 00000000..fc0e028d
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -0,0 +1,41 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1).  However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
+#define SECTION_SIZE_BITS	24
+#define MAX_PHYSMEM_BITS	32
+
+#endif
+
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
new file mode 100644
index 00000000..9a433155
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/syspld.h
+ *
+ *  System Control PLD register definitions.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSPLD_H
+#define __ASM_ARCH_SYSPLD_H
+
+#define SYSPLD_PHYS_BASE	(0x10000000)
+#define SYSPLD_VIRT_BASE	IO_ADDRESS(SYSPLD_PHYS_BASE)
+
+#define SYSPLD_REG(type, off)	(*(volatile type *)(SYSPLD_VIRT_BASE + (off)))
+
+#define PLD_INT		SYSPLD_REG(u32, 0x000000)
+#define PLD_INT_PENIRQ		(1 << 5)
+#define PLD_INT_UCB_IRQ		(1 << 1)
+#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
+
+#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
+#define PLD_PWR_EXT		(1 << 5)
+#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
+#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
+#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
+#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
+
+#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
+#define PLD_KBD_WAKE		(1 << 1)
+#define PLD_KBD_EN		(1 << 0)
+
+#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
+#define PLD_SPI_EN		(1 << 0)
+
+#define PLD_IO		SYSPLD_REG(u32, 0x000010)
+#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
+#define PLD_IO_USER		(1 << 5)	/* user defined switch */
+#define PLD_IO_LED3		(1 << 4)
+#define PLD_IO_LED2		(1 << 3)
+#define PLD_IO_LED1		(1 << 2)
+#define PLD_IO_LED0		(1 << 1)
+#define PLD_IO_LEDEN		(1 << 0)
+
+#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
+#define PLD_IRDA_EN		(1 << 0)
+
+#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
+#define PLD_COM2_EN		(1 << 0)
+
+#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
+#define PLD_COM1_EN		(1 << 0)
+
+#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
+#define PLD_AUD_DIV1		(1 << 6)
+#define PLD_AUD_DIV0		(1 << 5)
+#define PLD_AUD_CLK_SEL1	(1 << 4)
+#define PLD_AUD_CLK_SEL0	(1 << 3)
+#define PLD_AUD_MIC_PWR		(1 << 2)
+#define PLD_AUD_MIC_GAIN	(1 << 1)
+#define PLD_AUD_CODEC_EN	(1 << 0)
+
+#define PLD_CF		SYSPLD_REG(u32, 0x000024)
+#define PLD_CF2_SLEEP		(1 << 5)
+#define PLD_CF1_SLEEP		(1 << 4)
+#define PLD_CF2_nPDREQ		(1 << 3)
+#define PLD_CF1_nPDREQ		(1 << 2)
+#define PLD_CF2_nIRQ		(1 << 1)
+#define PLD_CF1_nIRQ		(1 << 0)
+
+#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
+#define PLD_SDC_INT_EN		(1 << 2)
+#define PLD_SDC_WP		(1 << 1)
+#define PLD_SDC_CD		(1 << 0)
+
+#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
+
+#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
+#define PLD_CODEC_IRQ3		(1 << 4)
+#define PLD_CODEC_IRQ2		(1 << 3)
+#define PLD_CODEC_IRQ1		(1 << 2)
+#define PLD_CODEC_EN		(1 << 0)
+
+#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
+#define PLD_BRITE_UP		(1 << 1)
+#define PLD_BRITE_DN		(1 << 0)
+
+#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
+#define PLD_LCDEN_EN		(1 << 0)
+
+#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
+
+#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
+#define PLD_TCH_PENIRQ		(1 << 1)
+#define PLD_TCH_EN		(1 << 0)
+
+#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
+#define PLD_GPIO2		(1 << 2)
+#define PLD_GPIO1		(1 << 1)
+#define PLD_GPIO0		(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
new file mode 100644
index 00000000..de6fd192
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -0,0 +1,2 @@
+/* Bogus value */
+#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
new file mode 100644
index 00000000..5f02d06d
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -0,0 +1,55 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/clps711x.h>
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx	SYSFLG2
+#define UARTDRx	UARTDR2
+#else
+#define SYSFLGx	SYSFLG1
+#define UARTDRx	UARTDR1
+#endif
+
+#define phys_reg(x)	(*(volatile u32 *)(CLPS711X_PHYS_BASE + (x)))
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (phys_reg(SYSFLGx) & SYSFLG_UTXFF)
+		barrier();
+	phys_reg(UARTDRx) = c;
+}
+
+static inline void flush(void)
+{
+	while (phys_reg(SYSFLGx) & SYSFLG_UBUSY)
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
-- 
cgit v1.3.1