From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001 From: Yuval Adam <_@yuv.al> Date: Wed, 30 Aug 2017 08:25:59 +0000 Subject: Initial file dump from open source release --- arch/arm/boot/compressed/head-sa1100.S | 48 ++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 arch/arm/boot/compressed/head-sa1100.S (limited to 'arch/arm/boot/compressed/head-sa1100.S') diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S new file mode 100644 index 00000000..3115e313 --- /dev/null +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -0,0 +1,48 @@ +/* + * linux/arch/arm/boot/compressed/head-sa1100.S + * + * Copyright (C) 1999 Nicolas Pitre + * + * SA1100 specific tweaks. This is merged into head.S by the linker. + * + */ + +#include +#include + + .section ".start", "ax" + .arch armv4 + +__SA1100_start: + + @ Preserve r8/r7 i.e. kernel entry values +#ifdef CONFIG_SA1100_COLLIE + mov r7, #MACH_TYPE_COLLIE +#endif +#ifdef CONFIG_SA1100_SIMPAD + @ UNTIL we've something like an open bootldr + mov r7, #MACH_TYPE_SIMPAD @should be 87 +#endif + mrc p15, 0, r0, c1, c0, 0 @ read control reg + ands r0, r0, #0x0d + beq 99f + + @ Data cache might be active. + @ Be sure to flush kernel binary out of the cache, + @ whatever state it is, before it is turned off. + @ This is done by fetching through currently executed + @ memory to be sure we hit the same cache. + bic r2, pc, #0x1f + add r3, r2, #0x4000 @ 16 kb is quite enough... +1: ldr r0, [r2], #32 + teq r2, r3 + bne 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches + + @ disabling MMU and caches + mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #0x0d @ clear WB, DC, MMU + bic r0, r0, #0x1000 @ clear Icache + mcr p15, 0, r0, c1, c0, 0 +99: -- cgit v1.3.1