From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 .../devicetree/bindings/hwmon/ntc_thermistor.txt   | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt

(limited to 'Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt')

diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
new file mode 100644
index 00000000..c6f66674
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
@@ -0,0 +1,29 @@
+NTC Thermistor hwmon sensors
+-------------------------------
+
+Requires node properties:
+- "compatible" value : one of
+	"ntc,ncp15wb473"
+	"ntc,ncp18wb473"
+	"ntc,ncp21wb473"
+	"ntc,ncp03wb473"
+	"ntc,ncp15wl333"
+- "pullup-uv"	Pull up voltage in micro volts
+- "pullup-ohm"	Pull up resistor value in ohms
+- "pulldown-ohm" Pull down resistor value in ohms
+- "connected-positive" Always ON, If not specified.
+		Status change is possible.
+- "io-channels"	Channel node of ADC to be used for
+		conversion.
+
+Read more about iio bindings at
+	Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+Example:
+	ncp15wb473@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 3>;
+	};
-- 
cgit v1.3.1