From 8e4bff4cab0ddac6060645b0715210484d02ff40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <_@yuv.al>
Date: Wed, 30 Aug 2017 08:25:59 +0000
Subject: Initial file dump from open source release

---
 Documentation/ABI/testing/sysfs-class-net-mesh | 101 +++++++++++++++++++++++++
 1 file changed, 101 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-net-mesh

(limited to 'Documentation/ABI/testing/sysfs-class-net-mesh')

diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
new file mode 100644
index 00000000..bdcd8b4e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -0,0 +1,101 @@
+
+What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates whether the batman protocol messages of the
+                mesh <mesh_iface> shall be aggregated or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+Date:           May 2011
+Contact:        Antonio Quartulli <ordex@autistici.org>
+Description:
+                Indicates whether the data traffic going from a
+                wireless client to another wireless client will be
+                silently dropped.
+
+What:           /sys/class/net/<mesh_iface>/mesh/bonding
+Date:           June 2010
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be sent using multiple interfaces at the
+                same time (if available).
+
+What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
+Date:           November 2011
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the bridge loop avoidance feature
+                is enabled. This feature detects and avoids loops
+                between the mesh and devices bridged with the soft
+                interface <mesh_iface>.
+
+What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
+Date:           October 2010
+Contact:        Andreas Langer <an.langer@gmx.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be fragmented or silently discarded if the
+                packet size exceeds the outgoing interface MTU.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the bandwidth which is propagated by this
+                node if gw_mode was set to 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the state of the gateway features. Can be
+                either 'off', 'client' or 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the selection criteria this node will use
+                to choose a gateway if gw_mode was set to 'client'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the penalty which will be applied to an
+                originator message's tq-field on every hop.
+
+What:           /sys/class/net/<mesh_iface>/mesh/network_coding
+Date:           Nov 2012
+Contact:        Martin Hundeboll <martin@hundeboll.net>
+Description:
+                Controls whether Network Coding (using some magic
+                to send fewer wifi packets but still the same
+                content) is enabled or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its protocol messages.
+
+What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date:           Dec 2011
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the routing procotol this mesh instance
+                uses to find the optimal paths through the mesh.
+
+What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Each batman node only maintains information about its
+                own local neighborhood, therefore generating graphs
+                showing the topology of the entire mesh is not easily
+                feasible without having a central instance to collect
+                the local topologies from all nodes. This file allows
+                to activate the collecting (server) mode.
-- 
cgit v1.3.1