From a6163888f3c56123b1db313743c6147ba498732c Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Fri, 8 Aug 2014 14:42:07 +0300 Subject: Add third_party libs --- third_party/lwip-1.4.1/src/netif/FILES | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 third_party/lwip-1.4.1/src/netif/FILES (limited to 'third_party/lwip-1.4.1/src/netif/FILES') diff --git a/third_party/lwip-1.4.1/src/netif/FILES b/third_party/lwip-1.4.1/src/netif/FILES new file mode 100644 index 0000000..e28952e --- /dev/null +++ b/third_party/lwip-1.4.1/src/netif/FILES @@ -0,0 +1,29 @@ +This directory contains generic network interface device drivers that +do not contain any hardware or architecture specific code. The files +are: + +etharp.c + Implements the ARP (Address Resolution Protocol) over + Ethernet. The code in this file should be used together with + Ethernet device drivers. Note that this module has been + largely made Ethernet independent so you should be able to + adapt this for other link layers (such as Firewire). + +ethernetif.c + An example of how an Ethernet device driver could look. This + file can be used as a "skeleton" for developing new Ethernet + network device drivers. It uses the etharp.c ARP code. + +loopif.c + A "loopback" network interface driver. It requires configuration + through the define LWIP_LOOPIF_MULTITHREADING (see opt.h). + +slipif.c + A generic implementation of the SLIP (Serial Line IP) + protocol. It requires a sio (serial I/O) module to work. + +ppp/ Point-to-Point Protocol stack + The PPP stack has been ported from ucip (http://ucip.sourceforge.net). + It matches quite well to pppd 2.3.1 (http://ppp.samba.org), although + compared to that, it has some modifications for embedded systems and + the source code has been reordered a bit. \ No newline at end of file -- cgit v1.3.1