From 4085ae3ddfbbf10c8ccbd3dccd43452c40a1fe40 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Fri, 13 Mar 2015 12:24:52 +0200 Subject: Add bootloader, nfclib and sensorlib --- sensorlib/hw_tmp100.h | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 sensorlib/hw_tmp100.h (limited to 'sensorlib/hw_tmp100.h') diff --git a/sensorlib/hw_tmp100.h b/sensorlib/hw_tmp100.h new file mode 100644 index 0000000..5debb87 --- /dev/null +++ b/sensorlib/hw_tmp100.h @@ -0,0 +1,93 @@ +//***************************************************************************** +// +// hw_tmp100.h - Macros used when accessing the Texas Instruments TMP100 +// Temperature Sensor +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __SENSORLIB_HW_TMP100_H__ +#define __SENSORLIB_HW_TMP100_H__ + +//***************************************************************************** +// +// The following are defines for the TMP100 Register Addresses +// +//***************************************************************************** +#define TMP100_O_TEMP 0x00 // Temperature register +#define TMP100_O_CONFIG 0x01 // Configuration register +#define TMP100_O_TEMP_LOW 0x02 // Temperature low register +#define TMP100_O_TEMP_HIGH 0x03 // Temperature high register + +//***************************************************************************** +// +// The following are defines for the bit fields in the TMP100_O_TEMP register. +// +//***************************************************************************** +#define TMP100_TEMP_M 0xFFFF // Temperature data +#define TMP100_TEMP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TMP100_O_CONFIG +// register. +// +//***************************************************************************** +#define TMP100_CONFIG_OS_ALERT 0x80 // Starts a one-shot when written, + // reports alert when read +#define TMP100_CONFIG_RES_M 0x60 // Converter resolution +#define TMP100_CONFIG_RES_9BIT 0x00 // 9-bit resolution (40 ms + // conversion time) +#define TMP100_CONFIG_RES_10BIT 0x20 // 10-bit resolution (80 ms + // conversion time) +#define TMP100_CONFIG_RES_11BIT 0x40 // 11-bit resolution (160 ms + // conversion time) +#define TMP100_CONFIG_RES_12BIT 0x60 // 12-bit resolution (320 ms + // conversion time) +#define TMP100_CONFIG_CR_M 0x18 // Consecutive fault configuration +#define TMP100_CONFIG_FAULT_1 0x00 // 1 consecutive fault +#define TMP100_CONFIG_FAULT_2 0x08 // 2 consecutive faults +#define TMP100_CONFIG_FAULT_4 0x10 // 4 consecutive faults +#define TMP100_CONFIG_FAULT_6 0x18 // 6 consecutive faults +#define TMP100_CONFIG_POL 0x04 // Alert pin polarity +#define TMP100_CONFIG_TM 0x02 // Thermostat mode +#define TMP100_CONFIG_SD 0x01 // Shutdown mode +#define TMP100_CONFIG_RES_S 5 +#define TMP100_CONFIG_FAULT_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TMP100_O_TEMP_LOW +// register. +// +//***************************************************************************** +#define TMP100_TEMP_LOW_M 0xFFFF // Temperature low data +#define TMP100_TEMP_LOW_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TMP100_O_TEMP_HIGH +// register. +// +//***************************************************************************** +#define TMP100_TEMP_HIGH_M 0xFFFF // Temperature high data +#define TMP100_TEMP_HIGH_S 0 + +#endif // __SENSORLIB_HW_TMP100_H__ -- cgit v1.3.1