From 4085ae3ddfbbf10c8ccbd3dccd43452c40a1fe40 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Fri, 13 Mar 2015 12:24:52 +0200 Subject: Add bootloader, nfclib and sensorlib --- sensorlib/hw_tmp006.h | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 sensorlib/hw_tmp006.h (limited to 'sensorlib/hw_tmp006.h') diff --git a/sensorlib/hw_tmp006.h b/sensorlib/hw_tmp006.h new file mode 100644 index 0000000..6c350c8 --- /dev/null +++ b/sensorlib/hw_tmp006.h @@ -0,0 +1,75 @@ +//***************************************************************************** +// +// hw_tmp006.h - Macros used when accessing the Texas Instruments TMP006 +// Infrared Temperature Sensor +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __SENSORLIB_HW_TMP006_H__ +#define __SENSORLIB_HW_TMP006_H__ + +//***************************************************************************** +// +// The following are defines for the TMP006 Register Addresses +// +//***************************************************************************** +#define TMP006_O_VOBJECT 0x00 // Raw object voltage measurement +#define TMP006_O_TAMBIENT 0x01 // Die temperature of the TMP006 +#define TMP006_O_CONFIG 0x02 // TMP006 Configuration +#define TMP006_O_MFG_ID 0xFE // TMP006 Manufacture + // Identification +#define TMP006_O_DEV_ID 0xFF // TMP006 Device Identification + +//***************************************************************************** +// +// The following are defines for the bit fields in the TMP006_O_CONFIG +// register. +// +//***************************************************************************** +#define TMP006_CONFIG_RESET_M 0x8000 // TMP006 device reset +#define TMP006_CONFIG_RESET_ASSERT \ + 0x8000 // Reset TMP006; self clearing +#define TMP006_CONFIG_MODE_M 0x7000 // Operation mode +#define TMP006_CONFIG_MODE_PD 0x0000 // Power down +#define TMP006_CONFIG_MODE_CONT 0x7000 // Continuous sampling +#define TMP006_CONFIG_CR_M 0x0E00 // Conversion rate setting +#define TMP006_CONFIG_CR_4 0x0000 // 4Hz conversion rate +#define TMP006_CONFIG_CR_2 0x0200 // 2Hz conversion rate +#define TMP006_CONFIG_CR_1 0x0400 // 1Hz conversion rate +#define TMP006_CONFIG_CR_0_5 0x0600 // 0.5Hz conversion rate +#define TMP006_CONFIG_CR_0_25 0x0800 // 0.25Hz conversion rate +#define TMP006_CONFIG_EN_DRDY_PIN_M \ + 0x0100 // Enable the DRDY output pin +#define TMP006_CONFIG_DIS_DRDY_PIN \ + 0x0000 // DRDY pin disabled +#define TMP006_CONFIG_EN_DRDY_PIN \ + 0x0100 // DRDY pin enabled +#define TMP006_CONFIG_DRDY_M 0x0080 // Data ready flag +#define TMP006_CONFIG_IN_PROG 0x0000 // Conversion in progress +#define TMP006_CONFIG_DRDY 0x0080 // Conversion complete +#define TMP006_CONFIG_RESET_S 15 +#define TMP006_CONFIG_MODE_S 12 +#define TMP006_CONFIG_CR_S 9 +#define TMP006_CONFIG_EN_DRDY_PIN_S \ + 8 +#define TMP006_CONFIG_DRDY_S 7 + +#endif // __SENSORLIB_HW_TMP006_H__ -- cgit v1.3.1