From 4085ae3ddfbbf10c8ccbd3dccd43452c40a1fe40 Mon Sep 17 00:00:00 2001
From: Yuval Adam <yuval@y3xz.com>
Date: Fri, 13 Mar 2015 12:24:52 +0200
Subject: Add bootloader, nfclib and sensorlib

---
 nfclib/directmode.h | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 nfclib/directmode.h

(limited to 'nfclib/directmode.h')

diff --git a/nfclib/directmode.h b/nfclib/directmode.h
new file mode 100644
index 0000000..6124859
--- /dev/null
+++ b/nfclib/directmode.h
@@ -0,0 +1,78 @@
+//*****************************************************************************
+//
+// directmode.h - Direct mode communications.
+//
+// Copyright (c) 2010-2014 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 2.1.0.12573 of the Tiva Firmware Development Package.
+//
+//*****************************************************************************
+
+#ifndef __DIRECTMODE_H__
+#define __DIRECTMODE_H__
+
+//*****************************************************************************
+//
+// Define NULL, if not already defined.
+//
+//*****************************************************************************
+#ifndef NULL
+#define NULL                    ((void *)0)
+#endif
+
+//
+// Input to DirectModeTransceive is an opaque stream of bits, grouped as 8
+// bits into one byte.  LSBit should be sent first.
+//
+#define DIRECT_MODE_SEND_OPAQUE 0
+
+//
+// Input to DirectModeTransceive is an array of bytes with associated parity
+// bit, stored as 16 bit words.  The lower 8 bits in each word are the byte
+// (LSBit should be sent first), the lowest bit of the upper 8 bits is the
+// parity bit.  The remaining 7 bits are ignored.
+//
+//
+#define DIRECT_MODE_SEND_PARITY 1
+
+//
+// Output from DirectModeTransceive should be an opaque bit stream, grouped as
+// 8 bits into one byte, LSBit was received first.
+//
+#define DIRECT_MODE_RECV_OPAQUE 0
+
+//
+// Output from DirectModeTransceive should be an array of bytes with
+// associated parity bit.
+//
+#define DIRECT_MODE_RECV_PARITY 2
+
+#define DIRECT_MODE_SEND_MASK   1
+#define DIRECT_MODE_RECV_MASK   2
+
+extern void DirectModeInit(void);
+extern void DirectModeTransceive(int iMode, void const *pvSendBuf,
+                                 unsigned int iSendBytes,
+                                 unsigned int iSendBits, void *pvRecvBuf,
+                                 unsigned int *piRecvBytes,
+                                 unsigned int *piRecvBits);
+
+extern void DirectModeEnable(unsigned int iMode);
+extern void DirectModeDisable(void);
+extern int DirectModeIsEnabled(void);
+
+#endif
-- 
cgit v1.3.1