From 7f4da522479c0f00126219f0c23b804c3a93d7a6 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Sun, 16 Mar 2014 14:40:16 +0200 Subject: Add driver lib for projects which require it --- driverlib/aes.c | 1305 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1305 insertions(+) create mode 100644 driverlib/aes.c (limited to 'driverlib/aes.c') diff --git a/driverlib/aes.c b/driverlib/aes.c new file mode 100644 index 0000000..e712a29 --- /dev/null +++ b/driverlib/aes.c @@ -0,0 +1,1305 @@ +//***************************************************************************** +// +// aes.c - Driver for the AES module. +// +// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.0.12573 of the Tiva Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup aes_api +//! @{ +// +//***************************************************************************** + +#include +#include +#include +#include "inc/hw_aes.h" +#include "inc/hw_ccm.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_nvic.h" +#include "inc/hw_types.h" +#include "driverlib/aes.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +//! Resets the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! +//! This function performs a softreset the AES module. +//! +//! \return None. +// +//***************************************************************************** +void +AESReset(uint32_t ui32Base) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Trigger the reset. + // + HWREG(ui32Base + AES_O_SYSCONFIG) |= AES_SYSCONFIG_SOFTRESET; + + // + // Wait for the reset to finish. + // + while((HWREG(ui32Base + AES_O_SYSSTATUS) & + AES_SYSSTATUS_RESETDONE) == 0) + { + } +} + +//***************************************************************************** +// +//! Configures the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui32Config is the configuration of the AES module. +//! +//! This function configures the AES module based on the specified parameters. +//! It does not change any DMA- or interrupt-related parameters. +//! +//! The ui32Config parameter is a bit-wise OR of a number of configuration +//! flags. The valid flags are grouped based on their function. +//! +//! The direction of the operation is specified with only of following flags: +//! +//! - \b AES_CFG_DIR_ENCRYPT - Encryption mode +//! - \b AES_CFG_DIR_DECRYPT - Decryption mode +//! +//! The key size is specified with only one of the following flags: +//! +//! - \b AES_CFG_KEY_SIZE_128BIT - Key size of 128 bits +//! - \b AES_CFG_KEY_SIZE_192BIT - Key size of 192 bits +//! - \b AES_CFG_KEY_SIZE_256BIT - Key size of 256 bits +//! +//! The mode of operation is specified with only one of the following flags. +//! +//! - \b AES_CFG_MODE_ECB - Electronic codebook mode +//! - \b AES_CFG_MODE_CBC - Cipher-block chaining mode +//! - \b AES_CFG_MODE_CFB - Cipher feedback mode +//! - \b AES_CFG_MODE_CTR - Counter mode +//! - \b AES_CFG_MODE_ICM - Integer counter mode +//! - \b AES_CFG_MODE_XTS - Ciphertext stealing mode +//! - \b AES_CFG_MODE_XTS_TWEAKJL - XEX-based tweaked-codebook mode with +//! ciphertext stealing with previous/intermediate tweak value and j loaded +//! - \b AES_CFG_MODE_XTS_K2IJL - XEX-based tweaked-codebook mode with +//! ciphertext stealing with key2, i and j loaded +//! - \b AES_CFG_MODE_XTS_K2ILJ0 - XEX-based tweaked-codebook mode with +//! ciphertext stealing with key2 and i loaded, j = 0 +//! - \b AES_CFG_MODE_F8 - F8 mode +//! - \b AES_CFG_MODE_F9 - F9 mode +//! - \b AES_CFG_MODE_CBCMAC - Cipher block chaining message authentication +//! code mode +//! - \b AES_CFG_MODE_GCM_HLY0ZERO - Galois/counter mode with GHASH with H +//! loaded, Y0-encrypted forced to zero and counter is not enabled. +//! - \b AES_CFG_MODE_GCM_HLY0CALC - Galois/counter mode with GHASH with H +//! loaded, Y0-encrypted calculated internally and counter is enabled. +//! - \b AES_CFG_MODE_GCM_HY0CALC - Galois/Counter mode with autonomous GHASH +//! (both H and Y0-encrypted calculated internally) and counter is enabled. +//! - \b AES_CFG_MODE_CCM - Counter with CBC-MAC mode +//! +//! The following defines are used to specify the counter width. It is only +//! required to be defined when using CTR, CCM, or GCM modes, only one of the +//! following defines must be used to specify the counter width length: +//! +//! - \b AES_CFG_CTR_WIDTH_32 - Counter is 32 bits +//! - \b AES_CFG_CTR_WIDTH_64 - Counter is 64 bits +//! - \b AES_CFG_CTR_WIDTH_96 - Counter is 96 bits +//! - \b AES_CFG_CTR_WIDTH_128 - Counter is 128 bits +//! +//! Only one of the following defines must be used to specify the length field +//! for CCM operations (L): +//! +//! - \b AES_CFG_CCM_L_1 - 1 byte +//! - \b AES_CFG_CCM_L_2 - 2 bytes +//! - \b AES_CFG_CCM_L_3 - 3 bytes +//! - \b AES_CFG_CCM_L_4 - 4 bytes +//! - \b AES_CFG_CCM_L_5 - 5 bytes +//! - \b AES_CFG_CCM_L_6 - 6 bytes +//! - \b AES_CFG_CCM_L_7 - 7 bytes +//! - \b AES_CFG_CCM_L_8 - 8 bytes +//! +//! Only one of the following defines must be used to specify the length of the +//! authentication field for CCM operations (M) through the \e ui32Config +//! argument in the AESConfigSet() function: +//! +//! - \b AES_CFG_CCM_M_4 - 4 bytes +//! - \b AES_CFG_CCM_M_6 - 6 bytes +//! - \b AES_CFG_CCM_M_8 - 8 bytes +//! - \b AES_CFG_CCM_M_10 - 10 bytes +//! - \b AES_CFG_CCM_M_12 - 12 bytes +//! - \b AES_CFG_CCM_M_14 - 14 bytes +//! - \b AES_CFG_CCM_M_16 - 16 bytes +//! +//! \note When performing a basic GHASH operation for used with GCM mode, use +//! the \b AES_CFG_MODE_GCM_HLY0ZERO and do not specify a direction. +//! +//! \return None. +// +//***************************************************************************** +void +AESConfigSet(uint32_t ui32Base, uint32_t ui32Config) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32Config & AES_CFG_DIR_ENCRYPT) || + (ui32Config & AES_CFG_DIR_DECRYPT)); + ASSERT((ui32Config & AES_CFG_KEY_SIZE_128BIT) || + (ui32Config & AES_CFG_KEY_SIZE_192BIT) || + (ui32Config & AES_CFG_KEY_SIZE_256BIT)); + ASSERT((ui32Config & AES_CFG_MODE_ECB) || + (ui32Config & AES_CFG_MODE_CBC) || + (ui32Config & AES_CFG_MODE_CTR) || + (ui32Config & AES_CFG_MODE_ICM) || + (ui32Config & AES_CFG_MODE_CFB) || + (ui32Config & AES_CFG_MODE_XTS_TWEAKJL) || + (ui32Config & AES_CFG_MODE_XTS_K2IJL) || + (ui32Config & AES_CFG_MODE_XTS_K2ILJ0) || + (ui32Config & AES_CFG_MODE_F8) || + (ui32Config & AES_CFG_MODE_F9) || + (ui32Config & AES_CFG_MODE_CTR) || + (ui32Config & AES_CFG_MODE_CBCMAC) || + (ui32Config & AES_CFG_MODE_GCM_HLY0ZERO) || + (ui32Config & AES_CFG_MODE_GCM_HLY0CALC) || + (ui32Config & AES_CFG_MODE_GCM_HY0CALC) || + (ui32Config & AES_CFG_MODE_CCM)); + ASSERT(((ui32Config & AES_CFG_MODE_CTR) || + (ui32Config & AES_CFG_MODE_GCM_HLY0ZERO) || + (ui32Config & AES_CFG_MODE_GCM_HLY0CALC) || + (ui32Config & AES_CFG_MODE_GCM_HY0CALC) || + (ui32Config & AES_CFG_MODE_CCM)) && + ((ui32Config & AES_CFG_CTR_WIDTH_32) || + (ui32Config & AES_CFG_CTR_WIDTH_64) || + (ui32Config & AES_CFG_CTR_WIDTH_96) || + (ui32Config & AES_CFG_CTR_WIDTH_128))); + ASSERT((ui32Config & AES_CFG_MODE_CCM) && + ((ui32Config & AES_CFG_CCM_L_1) || + (ui32Config & AES_CFG_CCM_L_2) || + (ui32Config & AES_CFG_CCM_L_3) || + (ui32Config & AES_CFG_CCM_L_4) || + (ui32Config & AES_CFG_CCM_L_5) || + (ui32Config & AES_CFG_CCM_L_6) || + (ui32Config & AES_CFG_CCM_L_7) || + (ui32Config & AES_CFG_CCM_L_8)) && + ((ui32Config & AES_CFG_CCM_M_4) || + (ui32Config & AES_CFG_CCM_M_6) || + (ui32Config & AES_CFG_CCM_M_8) || + (ui32Config & AES_CFG_CCM_M_10) || + (ui32Config & AES_CFG_CCM_M_12) || + (ui32Config & AES_CFG_CCM_M_14) || + (ui32Config & AES_CFG_CCM_M_16))); + + // + // Backup the save context field before updating the register. + // + if(HWREG(ui32Base + AES_O_CTRL) & AES_CTRL_SAVE_CONTEXT) + { + ui32Config |= AES_CTRL_SAVE_CONTEXT; + } + + // + // Write the CTRL register with the new value + // + HWREG(ui32Base + AES_O_CTRL) = ui32Config; +} + +//***************************************************************************** +// +//! Writes the key 1 configuration registers, which are used for encryption or +//! decryption. +//! +//! \param ui32Base is the base address for the AES module. +//! \param pui32Key is an array of 32-bit words, containing the key to be +//! configured. The least significant word in the 0th index. +//! \param ui32Keysize is the size of the key, which must be one of the +//! following values: \b AES_CFG_KEY_SIZE_128, \b AES_CFG_KEY_SIZE_192, or +//! \b AES_CFG_KEY_SIZE_256. +//! +//! This function writes key 1 configuration registers based on the key +//! size. This function is used in all modes. +//! +//! \return None. +// +//***************************************************************************** +void +AESKey1Set(uint32_t ui32Base, uint32_t *pui32Key, uint32_t ui32Keysize) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32Keysize == AES_CFG_KEY_SIZE_128BIT) || + (ui32Keysize == AES_CFG_KEY_SIZE_192BIT) || + (ui32Keysize == AES_CFG_KEY_SIZE_256BIT)); + + // + // With all key sizes, the first 4 words are written. + // + HWREG(ui32Base + AES_O_KEY1_0) = pui32Key[0]; + HWREG(ui32Base + AES_O_KEY1_1) = pui32Key[1]; + HWREG(ui32Base + AES_O_KEY1_2) = pui32Key[2]; + HWREG(ui32Base + AES_O_KEY1_3) = pui32Key[3]; + + // + // The key is 192 or 256 bits. Write the next 2 words. + // + if(ui32Keysize != AES_CFG_KEY_SIZE_128BIT) + { + HWREG(ui32Base + AES_O_KEY1_4) = pui32Key[4]; + HWREG(ui32Base + AES_O_KEY1_5) = pui32Key[5]; + } + + // + // The key is 256 bits. Write the last 2 words. + // + if(ui32Keysize == AES_CFG_KEY_SIZE_256BIT) + { + HWREG(ui32Base + AES_O_KEY1_6) = pui32Key[6]; + HWREG(ui32Base + AES_O_KEY1_7) = pui32Key[7]; + } +} + +//***************************************************************************** +// +//! Writes the key 2 configuration registers, which are used for encryption or +//! decryption. +//! +//! \param ui32Base is the base address for the AES module. +//! \param pui32Key is an array of 32-bit words, containing the key to be +//! configured. The least significant word in the 0th index. +//! \param ui32Keysize is the size of the key, which must be one of the +//! following values: \b AES_CFG_KEY_SIZE_128, \b AES_CFG_KEY_SIZE_192, or +//! \b AES_CFG_KEY_SIZE_256. +//! +//! This function writes the key 2 configuration registers based on the key +//! size. This function is used in the F8, F9, XTS, CCM, and CBC-MAC modes. +//! +//! \return None. +// +//***************************************************************************** +void +AESKey2Set(uint32_t ui32Base, uint32_t *pui32Key, uint32_t ui32Keysize) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32Keysize == AES_CFG_KEY_SIZE_128BIT) || + (ui32Keysize == AES_CFG_KEY_SIZE_192BIT) || + (ui32Keysize == AES_CFG_KEY_SIZE_256BIT)); + + // + // With all key sizes, the first 4 words are written. + // + HWREG(ui32Base + AES_O_KEY2_0) = pui32Key[0]; + HWREG(ui32Base + AES_O_KEY2_1) = pui32Key[1]; + HWREG(ui32Base + AES_O_KEY2_2) = pui32Key[2]; + HWREG(ui32Base + AES_O_KEY2_3) = pui32Key[3]; + + // + // The key is 192 or 256 bits. Write the next 2 words. + // + if(ui32Keysize != AES_CFG_KEY_SIZE_128BIT) + { + HWREG(ui32Base + AES_O_KEY2_4) = pui32Key[4]; + HWREG(ui32Base + AES_O_KEY2_5) = pui32Key[5]; + } + + // + // The key is 256 bits. Write the last 2 words. + // + if(ui32Keysize == AES_CFG_KEY_SIZE_256BIT) + { + HWREG(ui32Base + AES_O_KEY2_6) = pui32Key[6]; + HWREG(ui32Base + AES_O_KEY2_7) = pui32Key[7]; + } +} + +//***************************************************************************** +// +//! Writes key 3 configuration registers, which are used for encryption or +//! decryption. +//! +//! \param ui32Base is the base address for the AES module. +//! \param pui32Key is a pointer to an array of 4 words (128 bits), containing +//! the key to be configured. The least significant word is in the 0th index. +//! +//! This function writes the key 2 configuration registers with key 3 data +//! used in CBC-MAC and F8 modes. This key is always 128 bits. +//! +//! \return None. +// +//***************************************************************************** +void +AESKey3Set(uint32_t ui32Base, uint32_t *pui32Key) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Write the key into the upper 4 key registers + // + HWREG(ui32Base + AES_O_KEY2_4) = pui32Key[0]; + HWREG(ui32Base + AES_O_KEY2_5) = pui32Key[1]; + HWREG(ui32Base + AES_O_KEY2_6) = pui32Key[2]; + HWREG(ui32Base + AES_O_KEY2_7) = pui32Key[3]; +} + +//***************************************************************************** +// +//! Writes the Initial Vector (IV) register, needed in some of the AES Modes. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32IVdata is an array of 4 words (128 bits), containing the IV +//! value to be configured. The least significant word is in the 0th index. +//! +//! This functions writes the initial vector registers in the AES module. +//! +//! \return None. +// +//***************************************************************************** +void +AESIVSet(uint32_t ui32Base, uint32_t *pui32IVdata) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Write the initial vector registers. + // + HWREG(ui32Base + AES_O_IV_IN_0) = pui32IVdata[0]; + HWREG(ui32Base + AES_O_IV_IN_1) = pui32IVdata[1]; + HWREG(ui32Base + AES_O_IV_IN_2) = pui32IVdata[2]; + HWREG(ui32Base + AES_O_IV_IN_3) = pui32IVdata[3]; +} + +//***************************************************************************** +// +//! Saves the Initial Vector (IV) registers to a user-defined location. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32IVData is pointer to the location that stores the IV data. +//! +//! This function stores the IV for use with authenticated encryption and +//! decryption operations. It is assumed that the AES_CTRL_SAVE_CONTEXT +//! bit is set in the AES_CTRL register. +//! +//! \return None. +// +//***************************************************************************** +void +AESIVRead(uint32_t ui32Base, uint32_t *pui32IVData) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Wait for the output context to be ready. + // + while((AES_CTRL_SVCTXTRDY & (HWREG(ui32Base + AES_O_CTRL))) == 0) + { + } + + // + // Read the tag data. + // + pui32IVData[0] = HWREG((ui32Base + AES_O_IV_IN_0)); + pui32IVData[1] = HWREG((ui32Base + AES_O_IV_IN_1)); + pui32IVData[2] = HWREG((ui32Base + AES_O_IV_IN_2)); + pui32IVData[3] = HWREG((ui32Base + AES_O_IV_IN_3)); +} + +//***************************************************************************** +// +//! Saves the tag registers to a user-defined location. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32TagData is pointer to the location that stores the tag data. +//! +//! This function stores the tag data for use authenticated encryption and +//! decryption operations. It is assumed that the AES_CTRL_SAVE_CONTEXT +//! bit is set in the AES_CTRL register. +//! +//! \return None. +// +//***************************************************************************** +void +AESTagRead(uint32_t ui32Base, uint32_t *pui32TagData) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Wait for the output context to be ready. + // + while((AES_CTRL_SVCTXTRDY & (HWREG(ui32Base + AES_O_CTRL))) == 0) + { + } + + // + // Read the tag data. + // + pui32TagData[0] = HWREG((ui32Base + AES_O_TAG_OUT_0)); + pui32TagData[1] = HWREG((ui32Base + AES_O_TAG_OUT_1)); + pui32TagData[2] = HWREG((ui32Base + AES_O_TAG_OUT_2)); + pui32TagData[3] = HWREG((ui32Base + AES_O_TAG_OUT_3)); +} + +//***************************************************************************** +// +//! Used to set the write crypto data length in the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui64Length is the crypto data length in bytes. +//! +//! This function stores the cryptographic data length in blocks for all modes. +//! Data lengths up to (2^61 - 1) bytes are allowed. For GCM, any value up +//! to (2^36 - 2) bytes are allowed because a 32-bit block counter is used. +//! For basic modes (ECB/CBC/CTR/ICM/CFB128), zero can be programmed into the +//! length field, indicating that the length is infinite. +//! +//! When this function is called, the engine is triggered to start using +//! this context. +//! +//! \note This length does not include the authentication-only data used in +//! some modes. Use the AESAuthLengthSet() function to specify the +//! authentication data length. +//! +//! \return None +// +//***************************************************************************** +void +AESLengthSet(uint32_t ui32Base, uint64_t ui64Length) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Write the length register by shifting the 64-bit ui64Length. + // + HWREG(ui32Base + AES_O_C_LENGTH_0) = (uint32_t)(ui64Length); + HWREG(ui32Base + AES_O_C_LENGTH_1) = (uint32_t)(ui64Length >> 32); +} + +//***************************************************************************** +// +//! Sets the authentication data length in the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui32Length is the length in bytes. +//! +//! This function is only used to write the authentication data length in the +//! combined modes (GCM or CCM) and XTS mode. Supported AAD lengths for CCM +//! are from 0 to (2^16 - 28) bytes. For GCM, any value up to (2^32 - 1) can +//! be used. For XTS mode, this register is used to load j. Loading of j is +//! only required if j != 0. j represents the sequential number of the 128-bit +//! blocks inside the data unit. Consequently, j must be multiplied by 16 +//! when passed to this function, thereby placing the block number in +//! bits [31:4] of the register. +//! +//! When this function is called, the engine is triggered to start using +//! this context for GCM and CCM. +//! +//! \return None +// +//***************************************************************************** +void +AESAuthLengthSet(uint32_t ui32Base, uint32_t ui32Length) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Write the length into the register. + // + HWREG(ui32Base + AES_O_AUTH_LENGTH) = ui32Length; +} + +//***************************************************************************** +// +//! Reads plaintext/ciphertext from data registers without blocking. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32Dest is a pointer to an array of words of data. +//! +//! This function reads a block of either plaintext or ciphertext out of the +//! AES module. If the output data is not ready, the function returns +//! false. If the read completed successfully, the function returns true. +//! A block is 16 bytes or 4 words. +//! +//! \return true or false. +// +//***************************************************************************** +bool +AESDataReadNonBlocking(uint32_t ui32Base, uint32_t *pui32Dest) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Check if the output is ready before reading the data. If it not ready, + // return false. + // + if((AES_CTRL_OUTPUT_READY & (HWREG(ui32Base + AES_O_CTRL))) == 0) + { + return(false); + } + + // + // Read a block of data from the data registers + // + pui32Dest[0] = HWREG(ui32Base + AES_O_DATA_IN_3); + pui32Dest[1] = HWREG(ui32Base + AES_O_DATA_IN_2); + pui32Dest[2] = HWREG(ui32Base + AES_O_DATA_IN_1); + pui32Dest[3] = HWREG(ui32Base + AES_O_DATA_IN_0); + + // + // Read successful, return true. + // + return(true); +} + +//***************************************************************************** +// +//! Reads plaintext/ciphertext from data registers with blocking. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32Dest is a pointer to an array of words. +//! +//! This function reads a block of either plaintext or ciphertext out of the +//! AES module. If the output is not ready, the function waits until it is +//! ready. A block is 16 bytes or 4 words. +//! +//! \return None. +// +//***************************************************************************** +void +AESDataRead(uint32_t ui32Base, uint32_t *pui32Dest) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Wait for the output to be ready before reading the data. + // + while((AES_CTRL_OUTPUT_READY & (HWREG(ui32Base + AES_O_CTRL))) == 0) + { + } + + // + // Read a block of data from the data registers + // + pui32Dest[0] = HWREG(ui32Base + AES_O_DATA_IN_3); + pui32Dest[1] = HWREG(ui32Base + AES_O_DATA_IN_2); + pui32Dest[2] = HWREG(ui32Base + AES_O_DATA_IN_1); + pui32Dest[3] = HWREG(ui32Base + AES_O_DATA_IN_0); +} + +//***************************************************************************** +// +//! Writes plaintext/ciphertext to data registers without blocking. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32Src is a pointer to an array of words of data. +//! +//! This function writes a block of either plaintext or ciphertext into the +//! AES module. If the input is not ready, the function returns false. If the +//! write completed successfully, the function returns true. A block is 16 +//! bytes or 4 words. +//! +//! \return True or false. +// +//***************************************************************************** +bool +AESDataWriteNonBlocking(uint32_t ui32Base, uint32_t *pui32Src) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Check if the input is ready. If not, then return false. + // + if(!(AES_CTRL_INPUT_READY & (HWREG(ui32Base + AES_O_CTRL)))) + { + return(false); + } + + // + // Write a block of data into the data registers. + // + HWREG(ui32Base + AES_O_DATA_IN_3) = pui32Src[0]; + HWREG(ui32Base + AES_O_DATA_IN_2) = pui32Src[1]; + HWREG(ui32Base + AES_O_DATA_IN_1) = pui32Src[2]; + HWREG(ui32Base + AES_O_DATA_IN_0) = pui32Src[3]; + + // + // Write successful, return true. + // + return(true); +} + +//***************************************************************************** +// +//! Writes plaintext/ciphertext to data registers with blocking. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32Src is a pointer to an array of bytes. +//! +//! This function writes a block of either plaintext or ciphertext into the +//! AES module. If the input is not ready, the function waits until it is +//! ready before performing the write. A block is 16 bytes or 4 words. +//! +//! \return None. +// +//***************************************************************************** +void +AESDataWrite(uint32_t ui32Base, uint32_t *pui32Src) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Wait for input ready. + // + while((AES_CTRL_INPUT_READY & (HWREG(ui32Base + AES_O_CTRL))) == 0) + { + } + + // + // Write a block of data into the data registers. + // + HWREG(ui32Base + AES_O_DATA_IN_3) = pui32Src[0]; + HWREG(ui32Base + AES_O_DATA_IN_2) = pui32Src[1]; + HWREG(ui32Base + AES_O_DATA_IN_1) = pui32Src[2]; + HWREG(ui32Base + AES_O_DATA_IN_0) = pui32Src[3]; +} + +//***************************************************************************** +// +//! Used to process(transform) blocks of data, either encrypt or decrypt it. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32Src is a pointer to the memory location where the input data +//! is stored. The data must be padded to the 16-byte boundary. +//! \param pui32Dest is a pointer to the memory location output is written. +//! The space for written data must be rounded up to the 16-byte boundary. +//! \param ui32Length is the length of the cryptographic data in bytes. +//! +//! This function iterates the encryption or decryption mechanism number over +//! the data length. Before calling this function, ensure that the AES +//! module is properly configured the key, data size, mode, etc. Only ECB, +//! CBC, CTR, ICM, CFB, XTS and F8 operating modes should be used. The data +//! is processed in 4-word (16-byte) blocks. +//! +//! \note This function only supports values of \e ui32Length less than 2^32, +//! because the memory size is restricted to between 0 to 2^32 bytes. +//! +//! \return Returns true if data was processed successfully. Returns false +//! if data processing failed. +// +//***************************************************************************** +bool +AESDataProcess(uint32_t ui32Base, uint32_t *pui32Src, uint32_t *pui32Dest, + uint32_t ui32Length) +{ + uint32_t ui32Count; + + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Write the length register first, which triggers the engine to start + // using this context. + // + AESLengthSet(AES_BASE, (uint64_t)ui32Length); + + // + // Now loop until the blocks are written. + // + for(ui32Count = 0; ui32Count < ui32Length; ui32Count += 16) + { + // + // Write the data registers. + // + AESDataWrite(ui32Base, pui32Src + (ui32Count / 4)); + + // + // Read the data registers. + // + AESDataRead(ui32Base, pui32Dest + (ui32Count / 4)); + } + + // + // Return true to indicate successful completion of the function. + // + return(true); +} + +//***************************************************************************** +// +//! Used to authenticate blocks of data by generating a hash tag. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32Src is a pointer to the memory location where the input data +//! is stored. The data must be padded to the 16-byte boundary. +//! \param ui32Length is the length of the cryptographic data in bytes. +//! \param pui32Tag is a pointer to a 4-word array where the hash tag is +//! written. +//! +//! This function processes data to produce a hash tag that can be used tor +//! authentication. Before calling this function, ensure that the AES +//! module is properly configured the key, data size, mode, etc. Only +//! CBC-MAC and F9 modes should be used. +//! +//! \return Returns true if data was processed successfully. Returns false +//! if data processing failed. +// +//***************************************************************************** +bool +AESDataAuth(uint32_t ui32Base, uint32_t *pui32Src, uint32_t ui32Length, + uint32_t *pui32Tag) +{ + uint32_t ui32Count; + + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Write the length register first, which triggers the engine to start + // using this context. + // + AESLengthSet(ui32Base, (uint64_t)ui32Length); + + // + // Now loop until the blocks are written. + // + for(ui32Count = 0; ui32Count < ui32Length; ui32Count += 16) + { + // + // Write the data registers. + // + AESDataWrite(ui32Base, pui32Src + (ui32Count / 4)); + } + + // + // Read the hash tag value. + // + AESTagRead(ui32Base, pui32Tag); + + // + // Return true to indicate successful completion of the function. + // + return(true); +} + +//***************************************************************************** +// +//! Processes and authenticates blocks of data, either encrypt it or decrypts +//! it. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pui32Src is a pointer to the memory location where the input data +//! is stored. The data must be padded to the 16-byte boundary. +//! \param pui32Dest is a pointer to the memory location output is written. +//! The space for written data must be rounded up to the 16-byte boundary. +//! \param ui32Length is the length of the cryptographic data in bytes. +//! \param pui32AuthSrc is a pointer to the memory location where the +//! additional authentication data is stored. The data must be padded to the +//! 16-byte boundary. +//! \param ui32AuthLength is the length of the additional authentication +//! data in bytes. +//! \param pui32Tag is a pointer to a 4-word array where the hash tag is +//! written. +//! +//! This function encrypts or decrypts blocks of data in addition to +//! authentication data. A hash tag is also produced. Before calling this +//! function, ensure that the AES module is properly configured the key, +//! data size, mode, etc. Only CCM and GCM modes should be used. +//! +//! \return Returns true if data was processed successfully. Returns false +//! if data processing failed. +// +//***************************************************************************** +bool +AESDataProcessAuth(uint32_t ui32Base, uint32_t *pui32Src, + uint32_t *pui32Dest, uint32_t ui32Length, + uint32_t *pui32AuthSrc, uint32_t ui32AuthLength, + uint32_t *pui32Tag) +{ + uint32_t ui32Count; + + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Set the data length. + // + AESLengthSet(ui32Base, (uint64_t)ui32Length); + + // + // Set the additional authentication data length. + // + AESAuthLengthSet(ui32Base, ui32AuthLength); + + // + // Now loop until the authentication data blocks are written. + // + for(ui32Count = 0; ui32Count < ui32AuthLength; ui32Count += 16) + { + // + // Write the data registers. + // + AESDataWrite(ui32Base, pui32AuthSrc + (ui32Count / 4)); + } + + // + // Now loop until the data blocks are written. + // + for(ui32Count = 0; ui32Count < ui32Length; ui32Count += 16) + { + // + // Write the data registers. + // + AESDataWrite(ui32Base, pui32Src + (ui32Count / 4)); + + // + // + // Read the data registers. + // + AESDataRead(ui32Base, pui32Dest + (ui32Count / 4)); + } + + // + // Read the hash tag value. + // + AESTagRead(ui32Base, pui32Tag); + + // + // Return true to indicate successful completion of the function. + // + return(true); +} + +//***************************************************************************** +// +//! Returns the current AES module interrupt status. +//! +//! \param ui32Base is the base address of the AES module. +//! \param bMasked is \b false if the raw interrupt status is required and +//! \b true if the masked interrupt status is required. +//! +//! \return Returns a bit mask of the interrupt sources, which is a logical OR +//! of any of the following: +//! +//! - \b AES_INT_CONTEXT_IN - Context interrupt +//! - \b AES_INT_CONTEXT_OUT - Authentication tag (and IV) interrupt. +//! - \b AES_INT_DATA_IN - Data input interrupt +//! - \b AES_INT_DATA_OUT - Data output interrupt +//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt +//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done +//! interrupt +//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt +//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt +// +//***************************************************************************** +uint32_t +AESIntStatus(uint32_t ui32Base, bool bMasked) +{ + uint32_t ui32Status, ui32Enable, ui32Temp; + + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Read the IRQ status register and return the value. + // + ui32Status = HWREG(ui32Base + AES_O_IRQSTATUS); + if(bMasked) + { + ui32Enable = HWREG(ui32Base + AES_O_IRQENABLE); + ui32Temp = HWREG(ui32Base + AES_O_DMAMIS); + return((ui32Status & ui32Enable) | + (((ui32Temp & 0x00000001) << 16) | + ((ui32Temp & 0x00000002) << 18) | + ((ui32Temp & 0x0000000c) << 15))); + } + else + { + ui32Temp = HWREG(ui32Base + AES_O_DMARIS); + return(ui32Status | + (((ui32Temp & 0x00000001) << 16) | + ((ui32Temp & 0x00000002) << 18) | + ((ui32Temp & 0x0000000c) << 15))); + } +} + +//***************************************************************************** +// +//! Enables AES module interrupts. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui32IntFlags is a bit mask of the interrupt sources to enable. +//! +//! This function enables the interrupts in the AES module. The +//! \e ui32IntFlags parameter is the logical OR of any of the following: +//! +//! - \b AES_INT_CONTEXT_IN - Context interrupt +//! - \b AES_INT_CONTEXT_OUT - Authentication tag (and IV) interrupt +//! - \b AES_INT_DATA_IN - Data input interrupt +//! - \b AES_INT_DATA_OUT - Data output interrupt +//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt +//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done +//! interrupt +//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt +//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt +//! +//! \note Interrupts that have been previously been enabled are not disabled +//! when this function is called. +//! +//! \return None. +// +//***************************************************************************** +void +AESIntEnable(uint32_t ui32Base, uint32_t ui32IntFlags) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32IntFlags == AES_INT_CONTEXT_IN) || + (ui32IntFlags == AES_INT_CONTEXT_OUT) || + (ui32IntFlags == AES_INT_DATA_IN) || + (ui32IntFlags == AES_INT_DATA_OUT) || + (ui32IntFlags == AES_INT_DMA_CONTEXT_IN) || + (ui32IntFlags == AES_INT_DMA_CONTEXT_OUT) || + (ui32IntFlags == AES_INT_DMA_DATA_IN) || + (ui32IntFlags == AES_INT_DMA_DATA_OUT)); + + // + // Set the flags. + // + HWREG(ui32Base + AES_O_DMAIM) |= (((ui32IntFlags & 0x00010000) >> 16) | + ((ui32IntFlags & 0x00060000) >> 15) | + ((ui32IntFlags & 0x00080000) >> 18)); + HWREG(ui32Base + AES_O_IRQENABLE) |= ui32IntFlags & 0x0000ffff; +} + +//***************************************************************************** +// +//! Disables AES module interrupts. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui32IntFlags is a bit mask of the interrupt sources to disable. +//! +//! This function disables the interrupt sources in the AES module. The +//! \e ui32IntFlags parameter is the logical OR of any of the following: +//! +//! - \b AES_INT_CONTEXT_IN - Context interrupt +//! - \b AES_INT_CONTEXT_OUT - Authentication tag (and IV) interrupt +//! - \b AES_INT_DATA_IN - Data input interrupt +//! - \b AES_INT_DATA_OUT - Data output interrupt +//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt +//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done +//! interrupt +//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt +//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt +//! +//! \note The DMA done interrupts are the only interrupts that can be cleared. +//! The remaining interrupts can be disabled instead using AESIntDisable(). +//! +//! \return None. +// +//***************************************************************************** +void +AESIntDisable(uint32_t ui32Base, uint32_t ui32IntFlags) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32IntFlags == AES_INT_CONTEXT_IN) || + (ui32IntFlags == AES_INT_CONTEXT_OUT) || + (ui32IntFlags == AES_INT_DATA_IN) || + (ui32IntFlags == AES_INT_DATA_OUT) || + (ui32IntFlags == AES_INT_DMA_CONTEXT_IN) || + (ui32IntFlags == AES_INT_DMA_CONTEXT_OUT) || + (ui32IntFlags == AES_INT_DMA_DATA_IN) || + (ui32IntFlags == AES_INT_DMA_DATA_OUT)); + + // + // Clear the flags. + // + HWREG(ui32Base + AES_O_DMAIM) &= ~(((ui32IntFlags & 0x00010000) >> 16) | + ((ui32IntFlags & 0x00060000) >> 15) | + ((ui32IntFlags & 0x00080000) >> 18)); + HWREG(ui32Base + AES_O_IRQENABLE) &= ~(ui32IntFlags & 0x0000ffff); +} + +//***************************************************************************** +// +//! Clears AES module interrupts. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui32IntFlags is a bit mask of the interrupt sources to disable. +//! +//! This function clears the interrupt sources in the AES module. The +//! \e ui32IntFlags parameter is the logical OR of any of the following: +//! +//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt +//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done +//! interrupt +//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt +//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt +//! +//! \note Only the DMA done interrupts can be cleared. The remaining +//! interrupts should be disabled with AESIntDisable(). +//! +//! \return None. +// +//***************************************************************************** +void +AESIntClear(uint32_t ui32Base, uint32_t ui32IntFlags) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32IntFlags == AES_INT_DMA_CONTEXT_IN) || + (ui32IntFlags == AES_INT_DMA_CONTEXT_OUT) || + (ui32IntFlags == AES_INT_DMA_DATA_IN) || + (ui32IntFlags == AES_INT_DMA_DATA_OUT)); + + HWREG(ui32Base + AES_O_DMAIC) = (((ui32IntFlags & 0x00010000) >> 16) | + ((ui32IntFlags & 0x00060000) >> 15) | + ((ui32IntFlags & 0x00080000) >> 18)); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! \param pfnHandler is a pointer to the function to be called when the +//! enabled AES interrupts occur. +//! +//! This function registers the interrupt handler in the interrupt vector +//! table, and enables AES interrupts on the interrupt controller; specific AES +//! interrupt sources must be enabled using AESIntEnable(). The interrupt +//! handler being registered must clear the source of the interrupt using +//! AESIntClear(). +//! +//! If the application is using a static interrupt vector table stored in +//! flash, then it is not necessary to register the interrupt handler this way. +//! Instead, IntEnable() is used to enable AES interrupts on the +//! interrupt controller. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +AESIntRegister(uint32_t ui32Base, void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Register the interrupt handler. + // + IntRegister(INT_AES0_TM4C129, pfnHandler); + + // + // Enable the interrupt + // + IntEnable(INT_AES0_TM4C129); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! +//! This function unregisters the previously registered interrupt handler and +//! disables the interrupt in the interrupt controller. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +AESIntUnregister(uint32_t ui32Base) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + + // + // Disable the interrupt. + // + IntDisable(INT_AES0_TM4C129); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_AES0_TM4C129); +} + +//***************************************************************************** +// +//! Enables uDMA requests for the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui32Flags is a bit mask of the uDMA requests to be enabled. +//! +//! This function enables the uDMA request sources in the AES module. +//! The \e ui32Flags parameter is the logical OR of any of the following: +//! +//! - \b AES_DMA_DATA_IN +//! - \b AES_DMA_DATA_OUT +//! - \b AES_DMA_CONTEXT_IN +//! - \b AES_DMA_CONTEXT_OUT +//! +//! \return None. +// +//***************************************************************************** +void +AESDMAEnable(uint32_t ui32Base, uint32_t ui32Flags) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32Flags == AES_DMA_DATA_IN) || + (ui32Flags == AES_DMA_DATA_OUT) || + (ui32Flags == AES_DMA_CONTEXT_IN) || + (ui32Flags == AES_DMA_CONTEXT_OUT)); + + // + // Set the flags in the current register value. + // + HWREG(ui32Base + AES_O_SYSCONFIG) |= ui32Flags; +} + +//***************************************************************************** +// +//! Disables uDMA requests for the AES module. +//! +//! \param ui32Base is the base address of the AES module. +//! \param ui32Flags is a bit mask of the uDMA requests to be disabled. +//! +//! This function disables the uDMA request sources in the AES module. +//! The \e ui32Flags parameter is the logical OR of any of the +//! following: +//! +//! - \b AES_DMA_DATA_IN +//! - \b AES_DMA_DATA_OUT +//! - \b AES_DMA_CONTEXT_IN +//! - \b AES_DMA_CONTEXT_OUT +//! +//! \return None. +// +//***************************************************************************** +void +AESDMADisable(uint32_t ui32Base, uint32_t ui32Flags) +{ + // + // Check the arguments. + // + ASSERT(ui32Base == AES_BASE); + ASSERT((ui32Flags == AES_DMA_DATA_IN) || + (ui32Flags == AES_DMA_DATA_OUT) || + (ui32Flags == AES_DMA_CONTEXT_IN) || + (ui32Flags == AES_DMA_CONTEXT_OUT)); + + // + // Clear the flags in the current register value. + // + HWREG(ui32Base + AES_O_SYSCONFIG) &= ~ui32Flags; +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** -- cgit v1.3.1