From c3e4c9a25c2910d2d66d52215b3406b13d5b23d5 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Sun, 29 Jun 2014 12:34:32 +0300 Subject: Add more board models --- boards/dk-tm4c129x/usb_host_mouse/readme.txt | 36 ++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 boards/dk-tm4c129x/usb_host_mouse/readme.txt (limited to 'boards/dk-tm4c129x/usb_host_mouse/readme.txt') diff --git a/boards/dk-tm4c129x/usb_host_mouse/readme.txt b/boards/dk-tm4c129x/usb_host_mouse/readme.txt new file mode 100644 index 0000000..7d69ef4 --- /dev/null +++ b/boards/dk-tm4c129x/usb_host_mouse/readme.txt @@ -0,0 +1,36 @@ +USB Host mouse example(usb_host_mouse) + +This example application demonstrates how to support a USB mouse using +the DK-TM4C129X development board. This application supports only a +standard mouse HID device, but can report on the types of other devices +that are connected without having the ability to access them. +The bottom left status bar reports the +type of device attached. The user interface for the application is +handled in the mouse_ui.c file while the usb_host_mouse.c file +handles start up and the USB interface. + +The application can be recompiled to run using and external USB phy to +implement a high speed host using an external USB phy. To use the external +phy the application must be built with \b USE_ULPI defined. This disables +the internal phy and the connector on the DK-TM4C129X board and enables the +connections to the external ULPI phy pins on the DK-TM4C129X board. + +------------------------------------------------------------------------------- + +Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +Software License Agreement + +Texas Instruments (TI) is supplying this software for use solely and +exclusively on TI's microcontroller products. The software is owned by +TI and/or its suppliers, and is protected under applicable copyright +laws. You may not combine this software with "viral" open-source +software in order to form a larger program. + +THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +DAMAGES, FOR ANY REASON WHATSOEVER. + +This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. -- cgit v1.3.1