From c3e4c9a25c2910d2d66d52215b3406b13d5b23d5 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Sun, 29 Jun 2014 12:34:32 +0300 Subject: Add more board models --- boards/dk-tm4c129x/usb_dev_bulk/Makefile | 94 +++ boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsimportspec | 10 + boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsproject | 10 + boards/dk-tm4c129x/usb_dev_bulk/ccs/.cproject | 186 +++++ boards/dk-tm4c129x/usb_dev_bulk/ccs/.project | 80 ++ .../ccs/.settings/org.eclipse.cdt.codan.core.prefs | 3 + .../usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin | Bin 0 -> 37952 bytes .../usb_dev_bulk/ccs/Debug/usb_dev_bulk.out | Bin 0 -> 595180 bytes .../usb_dev_bulk/ccs/macros.ini_initial | 1 + .../usb_dev_bulk/ccs/target_config.ccxml | 13 + .../usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin | Bin 0 -> 35132 bytes .../usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out | Bin 0 -> 460652 bytes .../dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.axf | Bin 0 -> 116580 bytes .../dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.bin | Bin 0 -> 36297 bytes boards/dk-tm4c129x/usb_dev_bulk/readme.txt | 43 ++ .../usb_dev_bulk/rvmdk/usb_dev_bulk.axf | Bin 0 -> 378700 bytes .../usb_dev_bulk/rvmdk/usb_dev_bulk.bin | Bin 0 -> 37420 bytes boards/dk-tm4c129x/usb_dev_bulk/startup_ccs.c | 277 +++++++ boards/dk-tm4c129x/usb_dev_bulk/startup_ewarm.c | 308 ++++++++ boards/dk-tm4c129x/usb_dev_bulk/startup_gcc.c | 324 ++++++++ boards/dk-tm4c129x/usb_dev_bulk/startup_rvmdk.S | 333 +++++++++ boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.c | 199 +++++ boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.h | 48 ++ boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.c | 655 +++++++++++++++++ boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewd | 614 ++++++++++++++++ boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewp | 811 +++++++++++++++++++++ boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.icf | 78 ++ boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ld | 57 ++ boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.sct | 47 ++ boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvopt | 401 ++++++++++ .../dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvproj | 464 ++++++++++++ .../dk-tm4c129x/usb_dev_bulk/usb_dev_bulk_ccs.cmd | 70 ++ 32 files changed, 5126 insertions(+) create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/Makefile create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsimportspec create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsproject create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/.cproject create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/.project create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/.settings/org.eclipse.cdt.codan.core.prefs create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.out create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/macros.ini_initial create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ccs/target_config.ccxml create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.axf create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.bin create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/readme.txt create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.axf create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.bin create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/startup_ccs.c create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/startup_ewarm.c create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/startup_gcc.c create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/startup_rvmdk.S create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.c create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.h create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.c create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewd create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewp create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.icf create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ld create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.sct create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvopt create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvproj create mode 100644 boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk_ccs.cmd (limited to 'boards/dk-tm4c129x/usb_dev_bulk') diff --git a/boards/dk-tm4c129x/usb_dev_bulk/Makefile b/boards/dk-tm4c129x/usb_dev_bulk/Makefile new file mode 100644 index 0000000..3fcb90d --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/Makefile @@ -0,0 +1,94 @@ +#****************************************************************************** +# +# Makefile - Rules for building the USB device bulk example. +# +# Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +# Software License Agreement +# +# Texas Instruments (TI) is supplying this software for use solely and +# exclusively on TI's microcontroller products. The software is owned by +# TI and/or its suppliers, and is protected under applicable copyright +# laws. You may not combine this software with "viral" open-source +# software in order to form a larger program. +# +# THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +# NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +# NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +# CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +# DAMAGES, FOR ANY REASON WHATSOEVER. +# +# This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +# +#****************************************************************************** + +# +# Defines the part type that this project uses. +# +PART=TM4C129XNCZAD + +# +# The base directory for TivaWare. +# +ROOT=../../../.. + +# +# Include the common make definitions. +# +include ${ROOT}/makedefs + +# +# Where to find source files that do not live in this directory. +# +VPATH=../drivers +VPATH+=../../../../utils + +# +# Where to find header files that do not live in the source directory. +# +IPATH=.. +IPATH+=../../../.. + +# +# The default rule, which causes the USB device bulk example to be built. +# +all: ${COMPILER} +all: ${COMPILER}/usb_dev_bulk.axf + +# +# The rule to clean out all the build products. +# +clean: + @rm -rf ${COMPILER} ${wildcard *~} + +# +# The rule to create the target directory. +# +${COMPILER}: + @mkdir -p ${COMPILER} + +# +# Rules for building the USB device bulk example. +# +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/frame.o +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/kentec320x240x16_ssd2119.o +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/pinout.o +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/startup_${COMPILER}.o +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/uartstdio.o +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/usb_bulk_structs.o +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/usb_dev_bulk.o +${COMPILER}/usb_dev_bulk.axf: ${COMPILER}/ustdlib.o +${COMPILER}/usb_dev_bulk.axf: ${ROOT}/usblib/${COMPILER}/libusb.a +${COMPILER}/usb_dev_bulk.axf: ${ROOT}/grlib/${COMPILER}/libgr.a +${COMPILER}/usb_dev_bulk.axf: ${ROOT}/driverlib/${COMPILER}/libdriver.a +${COMPILER}/usb_dev_bulk.axf: usb_dev_bulk.ld +SCATTERgcc_usb_dev_bulk=usb_dev_bulk.ld +ENTRY_usb_dev_bulk=ResetISR +CFLAGSgcc=-DTARGET_IS_TM4C129_RA0 -DUART_BUFFERED + +# +# Include the automatically generated dependency files. +# +ifneq (${MAKECMDGOALS},clean) +-include ${wildcard ${COMPILER}/*.d} __dummy__ +endif diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsimportspec b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsimportspec new file mode 100644 index 0000000..6c9f4a0 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsimportspec @@ -0,0 +1,10 @@ + + + + + + + + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsproject b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsproject new file mode 100644 index 0000000..59a3400 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.ccsproject @@ -0,0 +1,10 @@ + + + + + + + + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/.cproject b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.cproject new file mode 100644 index 0000000..8c2c9d0 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.cproject @@ -0,0 +1,186 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/.project b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.project new file mode 100644 index 0000000..8995056 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.project @@ -0,0 +1,80 @@ + + + usb_dev_bulk + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + com.ti.ccstudio.core.ccsNature + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.core.ccnature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + startup_ccs.c + 1 + SW_ROOT/examples/boards/dk-tm4c129x/usb_dev_bulk/startup_ccs.c + + + usb_bulk_structs.c + 1 + SW_ROOT/examples/boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.c + + + usb_dev_bulk.c + 1 + SW_ROOT/examples/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.c + + + usb_dev_bulk_ccs.cmd + 1 + SW_ROOT/examples/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk_ccs.cmd + + + drivers/frame.c + 1 + SW_ROOT/examples/boards/dk-tm4c129x/drivers/frame.c + + + drivers/kentec320x240x16_ssd2119.c + 1 + SW_ROOT/examples/boards/dk-tm4c129x/drivers/kentec320x240x16_ssd2119.c + + + drivers/pinout.c + 1 + SW_ROOT/examples/boards/dk-tm4c129x/drivers/pinout.c + + + utils/uartstdio.c + 1 + SW_ROOT/utils/uartstdio.c + + + utils/ustdlib.c + 1 + SW_ROOT/utils/ustdlib.c + + + + + SW_ROOT + $%7BPARENT-5-PROJECT_LOC%7D + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/.settings/org.eclipse.cdt.codan.core.prefs b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000..98b6350 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/ccs/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1 +inEditor=false +onBuild=false diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin b/boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin new file mode 100644 index 0000000..55d54b0 Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.bin differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.out b/boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.out new file mode 100644 index 0000000..ee22e4e Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/ccs/Debug/usb_dev_bulk.out differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/macros.ini_initial b/boards/dk-tm4c129x/usb_dev_bulk/ccs/macros.ini_initial new file mode 100644 index 0000000..31214b5 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/ccs/macros.ini_initial @@ -0,0 +1 @@ +SW_ROOT = ../../../../.. diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ccs/target_config.ccxml b/boards/dk-tm4c129x/usb_dev_bulk/ccs/target_config.ccxml new file mode 100644 index 0000000..6e5ef45 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/ccs/target_config.ccxml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin b/boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin new file mode 100644 index 0000000..7f80d3d Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.bin differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out b/boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out new file mode 100644 index 0000000..14f8f8b Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/ewarm/Exe/usb_dev_bulk.out differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.axf b/boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.axf new file mode 100644 index 0000000..0ac7241 Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.axf differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.bin b/boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.bin new file mode 100644 index 0000000..179ebab Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/gcc/usb_dev_bulk.bin differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/readme.txt b/boards/dk-tm4c129x/usb_dev_bulk/readme.txt new file mode 100644 index 0000000..351243c --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/readme.txt @@ -0,0 +1,43 @@ +USB Generic Bulk Device + +This example provides a generic USB device offering simple bulk data +transfer to and from the host. The device uses a vendor-specific class ID +and supports a single bulk IN endpoint and a single bulk OUT endpoint. +Data received from the host is assumed to be ASCII text and it is +echoed back with the case of all alphabetic characters swapped. + +A Windows INF file for the device is provided on the installation media and +in the C:/ti/TivaWare-C-Series-X.X/windows_drivers directory of TivaWare +releases. This INF contains information required to install the WinUSB +subsystem on WindowsXP and Vista PCs. WinUSB is a Windows subsystem +allowing user mode applications to access the USB device without the need +for a vendor-specific kernel mode driver. + +A sample Windows command-line application, usb_bulk_example, illustrating +how to connect to and communicate with the bulk device is also provided. +The application binary is installed as part of the ``Windows-side examples +for USB kits'' package (SW-USB-win) on the installation CD or via download +from http://www.ti.com/tivaware . Project files are included to allow +the examples to be built using Microsoft Visual Studio 2008. Source code +for this application can be found in directory +ti/TivaWare-for-C-Series/tools/usb_bulk_example. + +------------------------------------------------------------------------------- + +Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +Software License Agreement + +Texas Instruments (TI) is supplying this software for use solely and +exclusively on TI's microcontroller products. The software is owned by +TI and/or its suppliers, and is protected under applicable copyright +laws. You may not combine this software with "viral" open-source +software in order to form a larger program. + +THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +DAMAGES, FOR ANY REASON WHATSOEVER. + +This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. diff --git a/boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.axf b/boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.axf new file mode 100644 index 0000000..807c85e Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.axf differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.bin b/boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.bin new file mode 100644 index 0000000..f9d9b2f Binary files /dev/null and b/boards/dk-tm4c129x/usb_dev_bulk/rvmdk/usb_dev_bulk.bin differ diff --git a/boards/dk-tm4c129x/usb_dev_bulk/startup_ccs.c b/boards/dk-tm4c129x/usb_dev_bulk/startup_ccs.c new file mode 100644 index 0000000..511f849 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/startup_ccs.c @@ -0,0 +1,277 @@ +//***************************************************************************** +// +// startup_ccs.c - Startup code for use with TI's Code Composer Studio. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +#include +#include "inc/hw_nvic.h" +#include "inc/hw_types.h" + +//***************************************************************************** +// +// Forward declaration of the default fault handlers. +// +//***************************************************************************** +void ResetISR(void); +static void NmiSR(void); +static void FaultISR(void); +static void IntDefaultHandler(void); + +//***************************************************************************** +// +// External declaration for the reset handler that is to be called when the +// processor is started +// +//***************************************************************************** +extern void _c_int00(void); + +//***************************************************************************** +// +// Linker variable that marks the top of the stack. +// +//***************************************************************************** +extern uint32_t __STACK_TOP; + +//***************************************************************************** +// +// External declarations for the interrupt handlers used by the application. +// +//***************************************************************************** +extern void SysTickIntHandler(void); +extern void UARTStdioIntHandler(void); +extern void USB0DeviceIntHandler(void); + +//***************************************************************************** +// +// The vector table. Note that the proper constructs must be placed on this to +// ensure that it ends up at physical address 0x0000.0000 or at the start of +// the program if located at a start address other than 0. +// +//***************************************************************************** +#pragma DATA_SECTION(g_pfnVectors, ".intvecs") +void (* const g_pfnVectors[])(void) = +{ + (void (*)(void))((uint32_t)&__STACK_TOP), + // The initial stack pointer + ResetISR, // The reset handler + NmiSR, // The NMI handler + FaultISR, // The hard fault handler + IntDefaultHandler, // The MPU fault handler + IntDefaultHandler, // The bus fault handler + IntDefaultHandler, // The usage fault handler + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // SVCall handler + IntDefaultHandler, // Debug monitor handler + 0, // Reserved + IntDefaultHandler, // The PendSV handler + SysTickIntHandler, // The SysTick handler + IntDefaultHandler, // GPIO Port A + IntDefaultHandler, // GPIO Port B + IntDefaultHandler, // GPIO Port C + IntDefaultHandler, // GPIO Port D + IntDefaultHandler, // GPIO Port E + UARTStdioIntHandler, // UART0 Rx and Tx + IntDefaultHandler, // UART1 Rx and Tx + IntDefaultHandler, // SSI0 Rx and Tx + IntDefaultHandler, // I2C0 Master and Slave + IntDefaultHandler, // PWM Fault + IntDefaultHandler, // PWM Generator 0 + IntDefaultHandler, // PWM Generator 1 + IntDefaultHandler, // PWM Generator 2 + IntDefaultHandler, // Quadrature Encoder 0 + IntDefaultHandler, // ADC Sequence 0 + IntDefaultHandler, // ADC Sequence 1 + IntDefaultHandler, // ADC Sequence 2 + IntDefaultHandler, // ADC Sequence 3 + IntDefaultHandler, // Watchdog timer + IntDefaultHandler, // Timer 0 subtimer A + IntDefaultHandler, // Timer 0 subtimer B + IntDefaultHandler, // Timer 1 subtimer A + IntDefaultHandler, // Timer 1 subtimer B + IntDefaultHandler, // Timer 2 subtimer A + IntDefaultHandler, // Timer 2 subtimer B + IntDefaultHandler, // Analog Comparator 0 + IntDefaultHandler, // Analog Comparator 1 + IntDefaultHandler, // Analog Comparator 2 + IntDefaultHandler, // System Control (PLL, OSC, BO) + IntDefaultHandler, // FLASH Control + IntDefaultHandler, // GPIO Port F + IntDefaultHandler, // GPIO Port G + IntDefaultHandler, // GPIO Port H + IntDefaultHandler, // UART2 Rx and Tx + IntDefaultHandler, // SSI1 Rx and Tx + IntDefaultHandler, // Timer 3 subtimer A + IntDefaultHandler, // Timer 3 subtimer B + IntDefaultHandler, // I2C1 Master and Slave + IntDefaultHandler, // CAN0 + IntDefaultHandler, // CAN1 + IntDefaultHandler, // Ethernet + IntDefaultHandler, // Hibernate + USB0DeviceIntHandler, // USB0 + IntDefaultHandler, // PWM Generator 3 + IntDefaultHandler, // uDMA Software Transfer + IntDefaultHandler, // uDMA Error + IntDefaultHandler, // ADC1 Sequence 0 + IntDefaultHandler, // ADC1 Sequence 1 + IntDefaultHandler, // ADC1 Sequence 2 + IntDefaultHandler, // ADC1 Sequence 3 + IntDefaultHandler, // External Bus Interface 0 + IntDefaultHandler, // GPIO Port J + IntDefaultHandler, // GPIO Port K + IntDefaultHandler, // GPIO Port L + IntDefaultHandler, // SSI2 Rx and Tx + IntDefaultHandler, // SSI3 Rx and Tx + IntDefaultHandler, // UART3 Rx and Tx + IntDefaultHandler, // UART4 Rx and Tx + IntDefaultHandler, // UART5 Rx and Tx + IntDefaultHandler, // UART6 Rx and Tx + IntDefaultHandler, // UART7 Rx and Tx + IntDefaultHandler, // I2C2 Master and Slave + IntDefaultHandler, // I2C3 Master and Slave + IntDefaultHandler, // Timer 4 subtimer A + IntDefaultHandler, // Timer 4 subtimer B + IntDefaultHandler, // Timer 5 subtimer A + IntDefaultHandler, // Timer 5 subtimer B + IntDefaultHandler, // FPU + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // I2C4 Master and Slave + IntDefaultHandler, // I2C5 Master and Slave + IntDefaultHandler, // GPIO Port M + IntDefaultHandler, // GPIO Port N + 0, // Reserved + IntDefaultHandler, // Tamper + IntDefaultHandler, // GPIO Port P (Summary or P0) + IntDefaultHandler, // GPIO Port P1 + IntDefaultHandler, // GPIO Port P2 + IntDefaultHandler, // GPIO Port P3 + IntDefaultHandler, // GPIO Port P4 + IntDefaultHandler, // GPIO Port P5 + IntDefaultHandler, // GPIO Port P6 + IntDefaultHandler, // GPIO Port P7 + IntDefaultHandler, // GPIO Port Q (Summary or Q0) + IntDefaultHandler, // GPIO Port Q1 + IntDefaultHandler, // GPIO Port Q2 + IntDefaultHandler, // GPIO Port Q3 + IntDefaultHandler, // GPIO Port Q4 + IntDefaultHandler, // GPIO Port Q5 + IntDefaultHandler, // GPIO Port Q6 + IntDefaultHandler, // GPIO Port Q7 + IntDefaultHandler, // GPIO Port R + IntDefaultHandler, // GPIO Port S + IntDefaultHandler, // SHA/MD5 0 + IntDefaultHandler, // AES 0 + IntDefaultHandler, // DES3DES 0 + IntDefaultHandler, // LCD Controller 0 + IntDefaultHandler, // Timer 6 subtimer A + IntDefaultHandler, // Timer 6 subtimer B + IntDefaultHandler, // Timer 7 subtimer A + IntDefaultHandler, // Timer 7 subtimer B + IntDefaultHandler, // I2C6 Master and Slave + IntDefaultHandler, // I2C7 Master and Slave + IntDefaultHandler, // HIM Scan Matrix Keyboard 0 + IntDefaultHandler, // One Wire 0 + IntDefaultHandler, // HIM PS/2 0 + IntDefaultHandler, // HIM LED Sequencer 0 + IntDefaultHandler, // HIM Consumer IR 0 + IntDefaultHandler, // I2C8 Master and Slave + IntDefaultHandler, // I2C9 Master and Slave + IntDefaultHandler // GPIO Port T +}; + +//***************************************************************************** +// +// This is the code that gets called when the processor first starts execution +// following a reset event. Only the absolutely necessary set is performed, +// after which the application supplied entry() routine is called. Any fancy +// actions (such as making decisions based on the reset cause register, and +// resetting the bits in that register) are left solely in the hands of the +// application. +// +//***************************************************************************** +void +ResetISR(void) +{ + // + // Jump to the CCS C initialization routine. This will enable the + // floating-point unit as well, so that does not need to be done here. + // + __asm(" .global _c_int00\n" + " b.w _c_int00"); +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a NMI. This +// simply enters an infinite loop, preserving the system state for examination +// by a debugger. +// +//***************************************************************************** +static void +NmiSR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a fault +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +FaultISR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives an unexpected +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +IntDefaultHandler(void) +{ + // + // Go into an infinite loop. + // + while(1) + { + } +} diff --git a/boards/dk-tm4c129x/usb_dev_bulk/startup_ewarm.c b/boards/dk-tm4c129x/usb_dev_bulk/startup_ewarm.c new file mode 100644 index 0000000..a2a01fe --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/startup_ewarm.c @@ -0,0 +1,308 @@ +//***************************************************************************** +// +// startup_ewarm.c - Startup code for use with IAR's Embedded Workbench, +// version 5. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +#include +#include "inc/hw_nvic.h" +#include "inc/hw_types.h" + +//***************************************************************************** +// +// Enable the IAR extensions for this source file. +// +//***************************************************************************** +#pragma language=extended + +//***************************************************************************** +// +// Forward declaration of the default fault handlers. +// +//***************************************************************************** +void ResetISR(void); +static void NmiSR(void); +static void FaultISR(void); +static void IntDefaultHandler(void); + +//***************************************************************************** +// +// External declarations for the interrupt handlers used by the application. +// +//***************************************************************************** +extern void SysTickIntHandler(void); +extern void UARTStdioIntHandler(void); +extern void USB0DeviceIntHandler(void); + +//***************************************************************************** +// +// The entry point for the application startup code. +// +//***************************************************************************** +extern void __iar_program_start(void); + +//***************************************************************************** +// +// Reserve space for the system stack. +// +//***************************************************************************** +static uint32_t pui32Stack[256] @ ".noinit"; + +//***************************************************************************** +// +// A union that describes the entries of the vector table. The union is needed +// since the first entry is the stack pointer and the remainder are function +// pointers. +// +//***************************************************************************** +typedef union +{ + void (*pfnHandler)(void); + uint32_t ui32Ptr; +} +uVectorEntry; + +//***************************************************************************** +// +// The vector table. Note that the proper constructs must be placed on this to +// ensure that it ends up at physical address 0x0000.0000. +// +//***************************************************************************** +__root const uVectorEntry __vector_table[] @ ".intvec" = +{ + { .ui32Ptr = (uint32_t)pui32Stack + sizeof(pui32Stack) }, + // The initial stack pointer + ResetISR, // The reset handler + NmiSR, // The NMI handler + FaultISR, // The hard fault handler + IntDefaultHandler, // The MPU fault handler + IntDefaultHandler, // The bus fault handler + IntDefaultHandler, // The usage fault handler + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // SVCall handler + IntDefaultHandler, // Debug monitor handler + 0, // Reserved + IntDefaultHandler, // The PendSV handler + SysTickIntHandler, // The SysTick handler + IntDefaultHandler, // GPIO Port A + IntDefaultHandler, // GPIO Port B + IntDefaultHandler, // GPIO Port C + IntDefaultHandler, // GPIO Port D + IntDefaultHandler, // GPIO Port E + UARTStdioIntHandler, // UART0 Rx and Tx + IntDefaultHandler, // UART1 Rx and Tx + IntDefaultHandler, // SSI0 Rx and Tx + IntDefaultHandler, // I2C0 Master and Slave + IntDefaultHandler, // PWM Fault + IntDefaultHandler, // PWM Generator 0 + IntDefaultHandler, // PWM Generator 1 + IntDefaultHandler, // PWM Generator 2 + IntDefaultHandler, // Quadrature Encoder 0 + IntDefaultHandler, // ADC Sequence 0 + IntDefaultHandler, // ADC Sequence 1 + IntDefaultHandler, // ADC Sequence 2 + IntDefaultHandler, // ADC Sequence 3 + IntDefaultHandler, // Watchdog timer + IntDefaultHandler, // Timer 0 subtimer A + IntDefaultHandler, // Timer 0 subtimer B + IntDefaultHandler, // Timer 1 subtimer A + IntDefaultHandler, // Timer 1 subtimer B + IntDefaultHandler, // Timer 2 subtimer A + IntDefaultHandler, // Timer 2 subtimer B + IntDefaultHandler, // Analog Comparator 0 + IntDefaultHandler, // Analog Comparator 1 + IntDefaultHandler, // Analog Comparator 2 + IntDefaultHandler, // System Control (PLL, OSC, BO) + IntDefaultHandler, // FLASH Control + IntDefaultHandler, // GPIO Port F + IntDefaultHandler, // GPIO Port G + IntDefaultHandler, // GPIO Port H + IntDefaultHandler, // UART2 Rx and Tx + IntDefaultHandler, // SSI1 Rx and Tx + IntDefaultHandler, // Timer 3 subtimer A + IntDefaultHandler, // Timer 3 subtimer B + IntDefaultHandler, // I2C1 Master and Slave + IntDefaultHandler, // CAN0 + IntDefaultHandler, // CAN1 + IntDefaultHandler, // Ethernet + IntDefaultHandler, // Hibernate + USB0DeviceIntHandler, // USB0 + IntDefaultHandler, // PWM Generator 3 + IntDefaultHandler, // uDMA Software Transfer + IntDefaultHandler, // uDMA Error + IntDefaultHandler, // ADC1 Sequence 0 + IntDefaultHandler, // ADC1 Sequence 1 + IntDefaultHandler, // ADC1 Sequence 2 + IntDefaultHandler, // ADC1 Sequence 3 + IntDefaultHandler, // External Bus Interface 0 + IntDefaultHandler, // GPIO Port J + IntDefaultHandler, // GPIO Port K + IntDefaultHandler, // GPIO Port L + IntDefaultHandler, // SSI2 Rx and Tx + IntDefaultHandler, // SSI3 Rx and Tx + IntDefaultHandler, // UART3 Rx and Tx + IntDefaultHandler, // UART4 Rx and Tx + IntDefaultHandler, // UART5 Rx and Tx + IntDefaultHandler, // UART6 Rx and Tx + IntDefaultHandler, // UART7 Rx and Tx + IntDefaultHandler, // I2C2 Master and Slave + IntDefaultHandler, // I2C3 Master and Slave + IntDefaultHandler, // Timer 4 subtimer A + IntDefaultHandler, // Timer 4 subtimer B + IntDefaultHandler, // Timer 5 subtimer A + IntDefaultHandler, // Timer 5 subtimer B + IntDefaultHandler, // FPU + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // I2C4 Master and Slave + IntDefaultHandler, // I2C5 Master and Slave + IntDefaultHandler, // GPIO Port M + IntDefaultHandler, // GPIO Port N + 0, // Reserved + IntDefaultHandler, // Tamper + IntDefaultHandler, // GPIO Port P (Summary or P0) + IntDefaultHandler, // GPIO Port P1 + IntDefaultHandler, // GPIO Port P2 + IntDefaultHandler, // GPIO Port P3 + IntDefaultHandler, // GPIO Port P4 + IntDefaultHandler, // GPIO Port P5 + IntDefaultHandler, // GPIO Port P6 + IntDefaultHandler, // GPIO Port P7 + IntDefaultHandler, // GPIO Port Q (Summary or Q0) + IntDefaultHandler, // GPIO Port Q1 + IntDefaultHandler, // GPIO Port Q2 + IntDefaultHandler, // GPIO Port Q3 + IntDefaultHandler, // GPIO Port Q4 + IntDefaultHandler, // GPIO Port Q5 + IntDefaultHandler, // GPIO Port Q6 + IntDefaultHandler, // GPIO Port Q7 + IntDefaultHandler, // GPIO Port R + IntDefaultHandler, // GPIO Port S + IntDefaultHandler, // SHA/MD5 0 + IntDefaultHandler, // AES 0 + IntDefaultHandler, // DES3DES 0 + IntDefaultHandler, // LCD Controller 0 + IntDefaultHandler, // Timer 6 subtimer A + IntDefaultHandler, // Timer 6 subtimer B + IntDefaultHandler, // Timer 7 subtimer A + IntDefaultHandler, // Timer 7 subtimer B + IntDefaultHandler, // I2C6 Master and Slave + IntDefaultHandler, // I2C7 Master and Slave + IntDefaultHandler, // HIM Scan Matrix Keyboard 0 + IntDefaultHandler, // One Wire 0 + IntDefaultHandler, // HIM PS/2 0 + IntDefaultHandler, // HIM LED Sequencer 0 + IntDefaultHandler, // HIM Consumer IR 0 + IntDefaultHandler, // I2C8 Master and Slave + IntDefaultHandler, // I2C9 Master and Slave + IntDefaultHandler // GPIO Port T +}; + +//***************************************************************************** +// +// This is the code that gets called when the processor first starts execution +// following a reset event. Only the absolutely necessary set is performed, +// after which the application supplied entry() routine is called. Any fancy +// actions (such as making decisions based on the reset cause register, and +// resetting the bits in that register) are left solely in the hands of the +// application. +// +//***************************************************************************** +void +ResetISR(void) +{ + // + // Enable the floating-point unit. This must be done here to handle the + // case where main() uses floating-point and the function prologue saves + // floating-point registers (which will fault if floating-point is not + // enabled). Any configuration of the floating-point unit using DriverLib + // APIs must be done here prior to the floating-point unit being enabled. + // + // Note that this does not use DriverLib since it might not be included in + // this project. + // + HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) & + ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) | + NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL); + + // + // Call the application's entry point. + // + __iar_program_start(); +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a NMI. This +// simply enters an infinite loop, preserving the system state for examination +// by a debugger. +// +//***************************************************************************** +static void +NmiSR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a fault +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +FaultISR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives an unexpected +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +IntDefaultHandler(void) +{ + // + // Go into an infinite loop. + // + while(1) + { + } +} diff --git a/boards/dk-tm4c129x/usb_dev_bulk/startup_gcc.c b/boards/dk-tm4c129x/usb_dev_bulk/startup_gcc.c new file mode 100644 index 0000000..a514361 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/startup_gcc.c @@ -0,0 +1,324 @@ +//***************************************************************************** +// +// startup_gcc.c - Startup code for use with GNU tools. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +#include +#include "inc/hw_nvic.h" +#include "inc/hw_types.h" + +//***************************************************************************** +// +// Forward declaration of the default fault handlers. +// +//***************************************************************************** +void ResetISR(void); +static void NmiSR(void); +static void FaultISR(void); +static void IntDefaultHandler(void); + +//***************************************************************************** +// +// External declarations for the interrupt handlers used by the application. +// +//***************************************************************************** +extern void SysTickIntHandler(void); +extern void UARTStdioIntHandler(void); +extern void USB0DeviceIntHandler(void); + +//***************************************************************************** +// +// The entry point for the application. +// +//***************************************************************************** +extern int main(void); + +//***************************************************************************** +// +// Reserve space for the system stack. +// +//***************************************************************************** +static uint32_t pui32Stack[256]; + +//***************************************************************************** +// +// The vector table. Note that the proper constructs must be placed on this to +// ensure that it ends up at physical address 0x0000.0000. +// +//***************************************************************************** +__attribute__ ((section(".isr_vector"))) +void (* const g_pfnVectors[])(void) = +{ + (void (*)(void))((uint32_t)pui32Stack + sizeof(pui32Stack)), + // The initial stack pointer + ResetISR, // The reset handler + NmiSR, // The NMI handler + FaultISR, // The hard fault handler + IntDefaultHandler, // The MPU fault handler + IntDefaultHandler, // The bus fault handler + IntDefaultHandler, // The usage fault handler + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // SVCall handler + IntDefaultHandler, // Debug monitor handler + 0, // Reserved + IntDefaultHandler, // The PendSV handler + SysTickIntHandler, // The SysTick handler + IntDefaultHandler, // GPIO Port A + IntDefaultHandler, // GPIO Port B + IntDefaultHandler, // GPIO Port C + IntDefaultHandler, // GPIO Port D + IntDefaultHandler, // GPIO Port E + UARTStdioIntHandler, // UART0 Rx and Tx + IntDefaultHandler, // UART1 Rx and Tx + IntDefaultHandler, // SSI0 Rx and Tx + IntDefaultHandler, // I2C0 Master and Slave + IntDefaultHandler, // PWM Fault + IntDefaultHandler, // PWM Generator 0 + IntDefaultHandler, // PWM Generator 1 + IntDefaultHandler, // PWM Generator 2 + IntDefaultHandler, // Quadrature Encoder 0 + IntDefaultHandler, // ADC Sequence 0 + IntDefaultHandler, // ADC Sequence 1 + IntDefaultHandler, // ADC Sequence 2 + IntDefaultHandler, // ADC Sequence 3 + IntDefaultHandler, // Watchdog timer + IntDefaultHandler, // Timer 0 subtimer A + IntDefaultHandler, // Timer 0 subtimer B + IntDefaultHandler, // Timer 1 subtimer A + IntDefaultHandler, // Timer 1 subtimer B + IntDefaultHandler, // Timer 2 subtimer A + IntDefaultHandler, // Timer 2 subtimer B + IntDefaultHandler, // Analog Comparator 0 + IntDefaultHandler, // Analog Comparator 1 + IntDefaultHandler, // Analog Comparator 2 + IntDefaultHandler, // System Control (PLL, OSC, BO) + IntDefaultHandler, // FLASH Control + IntDefaultHandler, // GPIO Port F + IntDefaultHandler, // GPIO Port G + IntDefaultHandler, // GPIO Port H + IntDefaultHandler, // UART2 Rx and Tx + IntDefaultHandler, // SSI1 Rx and Tx + IntDefaultHandler, // Timer 3 subtimer A + IntDefaultHandler, // Timer 3 subtimer B + IntDefaultHandler, // I2C1 Master and Slave + IntDefaultHandler, // CAN0 + IntDefaultHandler, // CAN1 + IntDefaultHandler, // Ethernet + IntDefaultHandler, // Hibernate + USB0DeviceIntHandler, // USB0 + IntDefaultHandler, // PWM Generator 3 + IntDefaultHandler, // uDMA Software Transfer + IntDefaultHandler, // uDMA Error + IntDefaultHandler, // ADC1 Sequence 0 + IntDefaultHandler, // ADC1 Sequence 1 + IntDefaultHandler, // ADC1 Sequence 2 + IntDefaultHandler, // ADC1 Sequence 3 + IntDefaultHandler, // External Bus Interface 0 + IntDefaultHandler, // GPIO Port J + IntDefaultHandler, // GPIO Port K + IntDefaultHandler, // GPIO Port L + IntDefaultHandler, // SSI2 Rx and Tx + IntDefaultHandler, // SSI3 Rx and Tx + IntDefaultHandler, // UART3 Rx and Tx + IntDefaultHandler, // UART4 Rx and Tx + IntDefaultHandler, // UART5 Rx and Tx + IntDefaultHandler, // UART6 Rx and Tx + IntDefaultHandler, // UART7 Rx and Tx + IntDefaultHandler, // I2C2 Master and Slave + IntDefaultHandler, // I2C3 Master and Slave + IntDefaultHandler, // Timer 4 subtimer A + IntDefaultHandler, // Timer 4 subtimer B + IntDefaultHandler, // Timer 5 subtimer A + IntDefaultHandler, // Timer 5 subtimer B + IntDefaultHandler, // FPU + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // I2C4 Master and Slave + IntDefaultHandler, // I2C5 Master and Slave + IntDefaultHandler, // GPIO Port M + IntDefaultHandler, // GPIO Port N + 0, // Reserved + IntDefaultHandler, // Tamper + IntDefaultHandler, // GPIO Port P (Summary or P0) + IntDefaultHandler, // GPIO Port P1 + IntDefaultHandler, // GPIO Port P2 + IntDefaultHandler, // GPIO Port P3 + IntDefaultHandler, // GPIO Port P4 + IntDefaultHandler, // GPIO Port P5 + IntDefaultHandler, // GPIO Port P6 + IntDefaultHandler, // GPIO Port P7 + IntDefaultHandler, // GPIO Port Q (Summary or Q0) + IntDefaultHandler, // GPIO Port Q1 + IntDefaultHandler, // GPIO Port Q2 + IntDefaultHandler, // GPIO Port Q3 + IntDefaultHandler, // GPIO Port Q4 + IntDefaultHandler, // GPIO Port Q5 + IntDefaultHandler, // GPIO Port Q6 + IntDefaultHandler, // GPIO Port Q7 + IntDefaultHandler, // GPIO Port R + IntDefaultHandler, // GPIO Port S + IntDefaultHandler, // SHA/MD5 0 + IntDefaultHandler, // AES 0 + IntDefaultHandler, // DES3DES 0 + IntDefaultHandler, // LCD Controller 0 + IntDefaultHandler, // Timer 6 subtimer A + IntDefaultHandler, // Timer 6 subtimer B + IntDefaultHandler, // Timer 7 subtimer A + IntDefaultHandler, // Timer 7 subtimer B + IntDefaultHandler, // I2C6 Master and Slave + IntDefaultHandler, // I2C7 Master and Slave + IntDefaultHandler, // HIM Scan Matrix Keyboard 0 + IntDefaultHandler, // One Wire 0 + IntDefaultHandler, // HIM PS/2 0 + IntDefaultHandler, // HIM LED Sequencer 0 + IntDefaultHandler, // HIM Consumer IR 0 + IntDefaultHandler, // I2C8 Master and Slave + IntDefaultHandler, // I2C9 Master and Slave + IntDefaultHandler // GPIO Port T +}; + +//***************************************************************************** +// +// The following are constructs created by the linker, indicating where the +// the "data" and "bss" segments reside in memory. The initializers for the +// for the "data" segment resides immediately following the "text" segment. +// +//***************************************************************************** +extern uint32_t _etext; +extern uint32_t _data; +extern uint32_t _edata; +extern uint32_t _bss; +extern uint32_t _ebss; + +//***************************************************************************** +// +// This is the code that gets called when the processor first starts execution +// following a reset event. Only the absolutely necessary set is performed, +// after which the application supplied entry() routine is called. Any fancy +// actions (such as making decisions based on the reset cause register, and +// resetting the bits in that register) are left solely in the hands of the +// application. +// +//***************************************************************************** +void +ResetISR(void) +{ + uint32_t *pui32Src, *pui32Dest; + + // + // Copy the data segment initializers from flash to SRAM. + // + pui32Src = &_etext; + for(pui32Dest = &_data; pui32Dest < &_edata; ) + { + *pui32Dest++ = *pui32Src++; + } + + // + // Zero fill the bss segment. + // + __asm(" ldr r0, =_bss\n" + " ldr r1, =_ebss\n" + " mov r2, #0\n" + " .thumb_func\n" + "zero_loop:\n" + " cmp r0, r1\n" + " it lt\n" + " strlt r2, [r0], #4\n" + " blt zero_loop"); + + // + // Enable the floating-point unit. This must be done here to handle the + // case where main() uses floating-point and the function prologue saves + // floating-point registers (which will fault if floating-point is not + // enabled). Any configuration of the floating-point unit using DriverLib + // APIs must be done here prior to the floating-point unit being enabled. + // + // Note that this does not use DriverLib since it might not be included in + // this project. + // + HWREG(NVIC_CPAC) = ((HWREG(NVIC_CPAC) & + ~(NVIC_CPAC_CP10_M | NVIC_CPAC_CP11_M)) | + NVIC_CPAC_CP10_FULL | NVIC_CPAC_CP11_FULL); + + // + // Call the application's entry point. + // + main(); +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a NMI. This +// simply enters an infinite loop, preserving the system state for examination +// by a debugger. +// +//***************************************************************************** +static void +NmiSR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a fault +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +FaultISR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives an unexpected +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +IntDefaultHandler(void) +{ + // + // Go into an infinite loop. + // + while(1) + { + } +} diff --git a/boards/dk-tm4c129x/usb_dev_bulk/startup_rvmdk.S b/boards/dk-tm4c129x/usb_dev_bulk/startup_rvmdk.S new file mode 100644 index 0000000..e2bf0c1 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/startup_rvmdk.S @@ -0,0 +1,333 @@ +; <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +; +; startup_rvmdk.S - Startup code for use with Keil's uVision. +; +; Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +; Software License Agreement +; +; Texas Instruments (TI) is supplying this software for use solely and +; exclusively on TI's microcontroller products. The software is owned by +; TI and/or its suppliers, and is protected under applicable copyright +; laws. You may not combine this software with "viral" open-source +; software in order to form a larger program. +; +; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +; DAMAGES, FOR ANY REASON WHATSOEVER. +; +; This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +; +;****************************************************************************** + +;****************************************************************************** +; +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; +;****************************************************************************** +Stack EQU 0x00000400 + +;****************************************************************************** +; +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; +;****************************************************************************** +Heap EQU 0x00000000 + +;****************************************************************************** +; +; Allocate space for the stack. +; +;****************************************************************************** + AREA STACK, NOINIT, READWRITE, ALIGN=3 +StackMem + SPACE Stack +__initial_sp + +;****************************************************************************** +; +; Allocate space for the heap. +; +;****************************************************************************** + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +HeapMem + SPACE Heap +__heap_limit + +;****************************************************************************** +; +; Indicate that the code in this file preserves 8-byte alignment of the stack. +; +;****************************************************************************** + PRESERVE8 + +;****************************************************************************** +; +; Place code into the reset code section. +; +;****************************************************************************** + AREA RESET, CODE, READONLY + THUMB + +;****************************************************************************** +; +; External declarations for the interrupt handlers used by the application. +; +;****************************************************************************** + EXTERN SysTickIntHandler + EXTERN UARTStdioIntHandler + EXTERN USB0DeviceIntHandler + +;****************************************************************************** +; +; The vector table. +; +;****************************************************************************** + EXPORT __Vectors +__Vectors + DCD StackMem + Stack ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NmiSR ; NMI Handler + DCD FaultISR ; Hard Fault Handler + DCD IntDefaultHandler ; The MPU fault handler + DCD IntDefaultHandler ; The bus fault handler + DCD IntDefaultHandler ; The usage fault handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD IntDefaultHandler ; SVCall handler + DCD IntDefaultHandler ; Debug monitor handler + DCD 0 ; Reserved + DCD IntDefaultHandler ; The PendSV handler + DCD SysTickIntHandler ; The SysTick handler + DCD IntDefaultHandler ; GPIO Port A + DCD IntDefaultHandler ; GPIO Port B + DCD IntDefaultHandler ; GPIO Port C + DCD IntDefaultHandler ; GPIO Port D + DCD IntDefaultHandler ; GPIO Port E + DCD UARTStdioIntHandler ; UART0 Rx and Tx + DCD IntDefaultHandler ; UART1 Rx and Tx + DCD IntDefaultHandler ; SSI0 Rx and Tx + DCD IntDefaultHandler ; I2C0 Master and Slave + DCD IntDefaultHandler ; PWM Fault + DCD IntDefaultHandler ; PWM Generator 0 + DCD IntDefaultHandler ; PWM Generator 1 + DCD IntDefaultHandler ; PWM Generator 2 + DCD IntDefaultHandler ; Quadrature Encoder 0 + DCD IntDefaultHandler ; ADC Sequence 0 + DCD IntDefaultHandler ; ADC Sequence 1 + DCD IntDefaultHandler ; ADC Sequence 2 + DCD IntDefaultHandler ; ADC Sequence 3 + DCD IntDefaultHandler ; Watchdog timer + DCD IntDefaultHandler ; Timer 0 subtimer A + DCD IntDefaultHandler ; Timer 0 subtimer B + DCD IntDefaultHandler ; Timer 1 subtimer A + DCD IntDefaultHandler ; Timer 1 subtimer B + DCD IntDefaultHandler ; Timer 2 subtimer A + DCD IntDefaultHandler ; Timer 2 subtimer B + DCD IntDefaultHandler ; Analog Comparator 0 + DCD IntDefaultHandler ; Analog Comparator 1 + DCD IntDefaultHandler ; Analog Comparator 2 + DCD IntDefaultHandler ; System Control (PLL, OSC, BO) + DCD IntDefaultHandler ; FLASH Control + DCD IntDefaultHandler ; GPIO Port F + DCD IntDefaultHandler ; GPIO Port G + DCD IntDefaultHandler ; GPIO Port H + DCD IntDefaultHandler ; UART2 Rx and Tx + DCD IntDefaultHandler ; SSI1 Rx and Tx + DCD IntDefaultHandler ; Timer 3 subtimer A + DCD IntDefaultHandler ; Timer 3 subtimer B + DCD IntDefaultHandler ; I2C1 Master and Slave + DCD IntDefaultHandler ; CAN0 + DCD IntDefaultHandler ; CAN1 + DCD IntDefaultHandler ; Ethernet + DCD IntDefaultHandler ; Hibernate + DCD USB0DeviceIntHandler ; USB0 + DCD IntDefaultHandler ; PWM Generator 3 + DCD IntDefaultHandler ; uDMA Software Transfer + DCD IntDefaultHandler ; uDMA Error + DCD IntDefaultHandler ; ADC1 Sequence 0 + DCD IntDefaultHandler ; ADC1 Sequence 1 + DCD IntDefaultHandler ; ADC1 Sequence 2 + DCD IntDefaultHandler ; ADC1 Sequence 3 + DCD IntDefaultHandler ; External Bus Interface 0 + DCD IntDefaultHandler ; GPIO Port J + DCD IntDefaultHandler ; GPIO Port K + DCD IntDefaultHandler ; GPIO Port L + DCD IntDefaultHandler ; SSI2 Rx and Tx + DCD IntDefaultHandler ; SSI3 Rx and Tx + DCD IntDefaultHandler ; UART3 Rx and Tx + DCD IntDefaultHandler ; UART4 Rx and Tx + DCD IntDefaultHandler ; UART5 Rx and Tx + DCD IntDefaultHandler ; UART6 Rx and Tx + DCD IntDefaultHandler ; UART7 Rx and Tx + DCD IntDefaultHandler ; I2C2 Master and Slave + DCD IntDefaultHandler ; I2C3 Master and Slave + DCD IntDefaultHandler ; Timer 4 subtimer A + DCD IntDefaultHandler ; Timer 4 subtimer B + DCD IntDefaultHandler ; Timer 5 subtimer A + DCD IntDefaultHandler ; Timer 5 subtimer B + DCD IntDefaultHandler ; FPU + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD IntDefaultHandler ; I2C4 Master and Slave + DCD IntDefaultHandler ; I2C5 Master and Slave + DCD IntDefaultHandler ; GPIO Port M + DCD IntDefaultHandler ; GPIO Port N + DCD 0 ; Reserved + DCD IntDefaultHandler ; Tamper + DCD IntDefaultHandler ; GPIO Port P (Summary or P0) + DCD IntDefaultHandler ; GPIO Port P1 + DCD IntDefaultHandler ; GPIO Port P2 + DCD IntDefaultHandler ; GPIO Port P3 + DCD IntDefaultHandler ; GPIO Port P4 + DCD IntDefaultHandler ; GPIO Port P5 + DCD IntDefaultHandler ; GPIO Port P6 + DCD IntDefaultHandler ; GPIO Port P7 + DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0) + DCD IntDefaultHandler ; GPIO Port Q1 + DCD IntDefaultHandler ; GPIO Port Q2 + DCD IntDefaultHandler ; GPIO Port Q3 + DCD IntDefaultHandler ; GPIO Port Q4 + DCD IntDefaultHandler ; GPIO Port Q5 + DCD IntDefaultHandler ; GPIO Port Q6 + DCD IntDefaultHandler ; GPIO Port Q7 + DCD IntDefaultHandler ; GPIO Port R + DCD IntDefaultHandler ; GPIO Port S + DCD IntDefaultHandler ; SHA/MD5 0 + DCD IntDefaultHandler ; AES 0 + DCD IntDefaultHandler ; DES3DES 0 + DCD IntDefaultHandler ; LCD Controller 0 + DCD IntDefaultHandler ; Timer 6 subtimer A + DCD IntDefaultHandler ; Timer 6 subtimer B + DCD IntDefaultHandler ; Timer 7 subtimer A + DCD IntDefaultHandler ; Timer 7 subtimer B + DCD IntDefaultHandler ; I2C6 Master and Slave + DCD IntDefaultHandler ; I2C7 Master and Slave + DCD IntDefaultHandler ; HIM Scan Matrix Keyboard 0 + DCD IntDefaultHandler ; One Wire 0 + DCD IntDefaultHandler ; HIM PS/2 0 + DCD IntDefaultHandler ; HIM LED Sequencer 0 + DCD IntDefaultHandler ; HIM Consumer IR 0 + DCD IntDefaultHandler ; I2C8 Master and Slave + DCD IntDefaultHandler ; I2C9 Master and Slave + DCD IntDefaultHandler ; GPIO Port T + +;****************************************************************************** +; +; This is the code that gets called when the processor first starts execution +; following a reset event. +; +;****************************************************************************** + EXPORT Reset_Handler +Reset_Handler + ; + ; Enable the floating-point unit. This must be done here to handle the + ; case where main() uses floating-point and the function prologue saves + ; floating-point registers (which will fault if floating-point is not + ; enabled). Any configuration of the floating-point unit using + ; DriverLib APIs must be done here prior to the floating-point unit + ; being enabled. + ; + ; Note that this does not use DriverLib since it might not be included + ; in this project. + ; + MOVW R0, #0xED88 + MOVT R0, #0xE000 + LDR R1, [R0] + ORR R1, #0x00F00000 + STR R1, [R0] + + ; + ; Call the C library enty point that handles startup. This will copy + ; the .data section initializers from flash to SRAM and zero fill the + ; .bss section. + ; + IMPORT __main + B __main + +;****************************************************************************** +; +; This is the code that gets called when the processor receives a NMI. This +; simply enters an infinite loop, preserving the system state for examination +; by a debugger. +; +;****************************************************************************** +NmiSR + B NmiSR + +;****************************************************************************** +; +; This is the code that gets called when the processor receives a fault +; interrupt. This simply enters an infinite loop, preserving the system state +; for examination by a debugger. +; +;****************************************************************************** +FaultISR + B FaultISR + +;****************************************************************************** +; +; This is the code that gets called when the processor receives an unexpected +; interrupt. This simply enters an infinite loop, preserving the system state +; for examination by a debugger. +; +;****************************************************************************** +IntDefaultHandler + B IntDefaultHandler + +;****************************************************************************** +; +; Make sure the end of this section is aligned. +; +;****************************************************************************** + ALIGN + +;****************************************************************************** +; +; Some code in the normal code section for initializing the heap and stack. +; +;****************************************************************************** + AREA |.text|, CODE, READONLY + +;****************************************************************************** +; +; The function expected of the C library startup code for defining the stack +; and heap memory locations. For the C library version of the startup code, +; provide this function so that the C library initialization code can find out +; the location of the stack and heap. +; +;****************************************************************************** + IF :DEF: __MICROLIB + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + ELSE + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap +__user_initial_stackheap + LDR R0, =HeapMem + LDR R1, =(StackMem + Stack) + LDR R2, =(HeapMem + Heap) + LDR R3, =StackMem + BX LR + ENDIF + +;****************************************************************************** +; +; Make sure the end of this section is aligned. +; +;****************************************************************************** + ALIGN + +;****************************************************************************** +; +; Tell the assembler that we're done. +; +;****************************************************************************** + END diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.c b/boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.c new file mode 100644 index 0000000..fac11df --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.c @@ -0,0 +1,199 @@ +//***************************************************************************** +// +// usb_bulk_structs.c - Data structures defining this bulk USB device. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +#include +#include +#include "driverlib/usb.h" +#include "usblib/usblib.h" +#include "usblib/usb-ids.h" +#include "usblib/device/usbdevice.h" +#include "usblib/device/usbdbulk.h" +#include "usb_bulk_structs.h" + +//***************************************************************************** +// +// The languages supported by this device. +// +//***************************************************************************** +const uint8_t g_pui8LangDescriptor[] = +{ + 4, + USB_DTYPE_STRING, + USBShort(USB_LANG_EN_US) +}; + +//***************************************************************************** +// +// The manufacturer string. +// +//***************************************************************************** +const uint8_t g_pui8ManufacturerString[] = +{ + (17 + 1) * 2, + USB_DTYPE_STRING, + 'T', 0, 'e', 0, 'x', 0, 'a', 0, 's', 0, ' ', 0, 'I', 0, 'n', 0, 's', 0, + 't', 0, 'r', 0, 'u', 0, 'm', 0, 'e', 0, 'n', 0, 't', 0, 's', 0, +}; + +//***************************************************************************** +// +// The product string. +// +//***************************************************************************** +const uint8_t g_pui8ProductString[] = +{ + (19 + 1) * 2, + USB_DTYPE_STRING, + 'G', 0, 'e', 0, 'n', 0, 'e', 0, 'r', 0, 'i', 0, 'c', 0, ' ', 0, 'B', 0, + 'u', 0, 'l', 0, 'k', 0, ' ', 0, 'D', 0, 'e', 0, 'v', 0, 'i', 0, 'c', 0, + 'e', 0 +}; + +//***************************************************************************** +// +// The serial number string. +// +//***************************************************************************** +const uint8_t g_pui8SerialNumberString[] = +{ + (8 + 1) * 2, + USB_DTYPE_STRING, + '1', 0, '2', 0, '3', 0, '4', 0, '5', 0, '6', 0, '7', 0, '8', 0 +}; + +//***************************************************************************** +// +// The data interface description string. +// +//***************************************************************************** +const uint8_t g_pui8DataInterfaceString[] = +{ + (19 + 1) * 2, + USB_DTYPE_STRING, + 'B', 0, 'u', 0, 'l', 0, 'k', 0, ' ', 0, 'D', 0, 'a', 0, 't', 0, + 'a', 0, ' ', 0, 'I', 0, 'n', 0, 't', 0, 'e', 0, 'r', 0, 'f', 0, + 'a', 0, 'c', 0, 'e', 0 +}; + +//***************************************************************************** +// +// The configuration description string. +// +//***************************************************************************** +const uint8_t g_pui8ConfigString[] = +{ + (23 + 1) * 2, + USB_DTYPE_STRING, + 'B', 0, 'u', 0, 'l', 0, 'k', 0, ' ', 0, 'D', 0, 'a', 0, 't', 0, + 'a', 0, ' ', 0, 'C', 0, 'o', 0, 'n', 0, 'f', 0, 'i', 0, 'g', 0, + 'u', 0, 'r', 0, 'a', 0, 't', 0, 'i', 0, 'o', 0, 'n', 0 +}; + +//***************************************************************************** +// +// The descriptor string table. +// +//***************************************************************************** +const uint8_t *const g_ppui8StringDescriptors[] = +{ + g_pui8LangDescriptor, + g_pui8ManufacturerString, + g_pui8ProductString, + g_pui8SerialNumberString, + g_pui8DataInterfaceString, + g_pui8ConfigString +}; + +#define NUM_STRING_DESCRIPTORS (sizeof(g_ppui8StringDescriptors) / \ + sizeof(uint8_t *)) + +//***************************************************************************** +// +// The bulk device initialization and customization structures. In this case, +// we are using USBBuffers between the bulk device class driver and the +// application code. The function pointers and callback data values are set +// to insert a buffer in each of the data channels, transmit and receive. +// +// With the buffer in place, the bulk channel callback is set to the relevant +// channel function and the callback data is set to point to the channel +// instance data. The buffer, in turn, has its callback set to the application +// function and the callback data set to our bulk instance structure. +// +//***************************************************************************** +extern const tUSBBuffer g_sTxBuffer; +extern const tUSBBuffer g_sRxBuffer; + +tUSBDBulkDevice g_sBulkDevice = +{ + USB_VID_TI_1CBE, + USB_PID_BULK, + 500, + USB_CONF_ATTR_SELF_PWR, + USBBufferEventCallback, + (void *)&g_sRxBuffer, + USBBufferEventCallback, + (void *)&g_sTxBuffer, + g_ppui8StringDescriptors, + NUM_STRING_DESCRIPTORS +}; + +//***************************************************************************** +// +// Receive buffer (from the USB perspective). +// +//***************************************************************************** +uint8_t g_pui8USBRxBuffer[BULK_BUFFER_SIZE]; +uint8_t g_pui8RxBufferWorkspace[USB_BUFFER_WORKSPACE_SIZE]; +const tUSBBuffer g_sRxBuffer = +{ + false, // This is a receive buffer. + RxHandler, // pfnCallback + (void *)&g_sBulkDevice, // Callback data is our device pointer. + USBDBulkPacketRead, // pfnTransfer + USBDBulkRxPacketAvailable, // pfnAvailable + (void *)&g_sBulkDevice, // pvHandle + g_pui8USBRxBuffer, // pi8Buffer + BULK_BUFFER_SIZE, // ui32BufferSize + g_pui8RxBufferWorkspace // pvWorkspace +}; + +//***************************************************************************** +// +// Transmit buffer (from the USB perspective). +// +//***************************************************************************** +uint8_t g_pui8USBTxBuffer[BULK_BUFFER_SIZE]; +uint8_t g_pui8TxBufferWorkspace[USB_BUFFER_WORKSPACE_SIZE]; +const tUSBBuffer g_sTxBuffer = +{ + true, // This is a transmit buffer. + TxHandler, // pfnCallback + (void *)&g_sBulkDevice, // Callback data is our device pointer. + USBDBulkPacketWrite, // pfnTransfer + USBDBulkTxPacketAvailable, // pfnAvailable + (void *)&g_sBulkDevice, // pvHandle + g_pui8USBTxBuffer, // pi8Buffer + BULK_BUFFER_SIZE, // ui32BufferSize + g_pui8TxBufferWorkspace // pvWorkspace +}; diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.h b/boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.h new file mode 100644 index 0000000..3249890 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_bulk_structs.h @@ -0,0 +1,48 @@ +//***************************************************************************** +// +// usb_bulk_structs.h - Data structures defining this bulk USB device. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +#ifndef _USB_BULK_STRUCTS_H_ +#define _USB_BULK_STRUCTS_H_ + +//***************************************************************************** +// +// The size of the transmit and receive buffers used. 256 is chosen pretty +// much at random though the buffer should be at least twice the size of +// a maximum-sized USB packet. +// +//***************************************************************************** +#define BULK_BUFFER_SIZE 256 + +extern uint32_t RxHandler(void *pvCBData, uint32_t ui32Event, + uint32_t ui32MsgValue, void *pvMsgData); +extern uint32_t TxHandler(void *pvi32CBData, uint32_t ui32Event, + uint32_t ui32MsgValue, void *pvMsgData); + +extern const tUSBBuffer g_sTxBuffer; +extern const tUSBBuffer g_sRxBuffer; +extern tUSBDBulkDevice g_sBulkDevice; +extern uint8_t g_pui8USBTxBuffer[]; +extern uint8_t g_pui8USBRxBuffer[]; + +#endif diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.c b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.c new file mode 100644 index 0000000..3c08376 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.c @@ -0,0 +1,655 @@ +//***************************************************************************** +// +// usb_dev_bulk.c - Main routines for the generic bulk device example. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +#include +#include +#include "inc/hw_ints.h" +#include "driverlib/interrupt.h" +#include "driverlib/sysctl.h" +#include "driverlib/systick.h" +#include "driverlib/rom.h" +#include "driverlib/rom_map.h" +#include "grlib/grlib.h" +#include "usblib/usblib.h" +#include "usblib/usb-ids.h" +#include "usblib/device/usbdevice.h" +#include "usblib/device/usbdbulk.h" +#include "utils/uartstdio.h" +#include "utils/ustdlib.h" +#include "drivers/frame.h" +#include "drivers/kentec320x240x16_ssd2119.h" +#include "drivers/pinout.h" +#include "usb_bulk_structs.h" + +//***************************************************************************** +// +//! \addtogroup example_list +//!

USB Generic Bulk Device (usb_dev_bulk)

+//! +//! This example provides a generic USB device offering simple bulk data +//! transfer to and from the host. The device uses a vendor-specific class ID +//! and supports a single bulk IN endpoint and a single bulk OUT endpoint. +//! Data received from the host is assumed to be ASCII text and it is +//! echoed back with the case of all alphabetic characters swapped. +//! +//! A Windows INF file for the device is provided on the installation media and +//! in the C:/ti/TivaWare-C-Series-X.X/windows_drivers directory of TivaWare +//! releases. This INF contains information required to install the WinUSB +//! subsystem on WindowsXP and Vista PCs. WinUSB is a Windows subsystem +//! allowing user mode applications to access the USB device without the need +//! for a vendor-specific kernel mode driver. +//! +//! A sample Windows command-line application, usb_bulk_example, illustrating +//! how to connect to and communicate with the bulk device is also provided. +//! The application binary is installed as part of the ``Windows-side examples +//! for USB kits'' package (SW-USB-win) on the installation CD or via download +//! from http://www.ti.com/tivaware . Project files are included to allow +//! the examples to be built using Microsoft Visual Studio 2008. Source code +//! for this application can be found in directory +//! ti/TivaWare-for-C-Series/tools/usb_bulk_example. +// +//***************************************************************************** + + +//***************************************************************************** +// +// The system tick rate expressed both as ticks per second and a millisecond +// period. +// +//***************************************************************************** +#define SYSTICKS_PER_SECOND 100 +#define SYSTICK_PERIOD_MS (1000 / SYSTICKS_PER_SECOND) + +//***************************************************************************** +// +// The global system tick counter. +// +//***************************************************************************** +volatile uint32_t g_ui32SysTickCount = 0; + +//***************************************************************************** +// +// Variables tracking transmit and receive counts. +// +//***************************************************************************** +volatile uint32_t g_ui32TxCount = 0; +volatile uint32_t g_ui32RxCount = 0; +#ifdef DEBUG +uint32_t g_ui32UARTRxErrors = 0; +#endif + +//***************************************************************************** +// +// Debug-related definitions and declarations. +// +// Debug output is available via UART0 if DEBUG is defined during build. +// +//***************************************************************************** +#ifdef DEBUG +//***************************************************************************** +// +// Map all debug print calls to UARTprintf in debug builds. +// +//***************************************************************************** +#define DEBUG_PRINT UARTprintf + +#else + +//***************************************************************************** +// +// Compile out all debug print calls in release builds. +// +//***************************************************************************** +#define DEBUG_PRINT while(0) ((int32_t (*)(char *, ...))0) +#endif + +//***************************************************************************** +// +// Graphics context used to show text on the color LCD display. +// +//***************************************************************************** +tContext g_sContext; +#define TEXT_FONT g_psFontCmss18b + +//***************************************************************************** +// +// Flags used to pass commands from interrupt context to the main loop. +// +//***************************************************************************** +#define COMMAND_PACKET_RECEIVED 0x00000001 +#define COMMAND_STATUS_UPDATE 0x00000002 + +volatile uint32_t g_ui32Flags = 0; +char *g_pcStatus; + +//***************************************************************************** +// +// Global flag indicating that a USB configuration has been set. +// +//***************************************************************************** +static volatile bool g_bUSBConfigured = false; + +//***************************************************************************** +// +// The error routine that is called if the driver library encounters an error. +// +//***************************************************************************** +#ifdef DEBUG +void +__error__(char *pcFilename, uint32_t ui32Line) +{ + UARTprintf("Error at line %d of %s\n", ui32Line, pcFilename); + while(1) + { + } +} +#endif + +//***************************************************************************** +// +// Interrupt handler for the system tick counter. +// +//***************************************************************************** +void +SysTickIntHandler(void) +{ + // + // Update our system tick counter. + // + g_ui32SysTickCount++; +} + +//***************************************************************************** +// +// Receive new data and echo it back to the host. +// +// \param psDevice points to the instance data for the device whose data is to +// be processed. +// \param pi8Data points to the newly received data in the USB receive buffer. +// \param ui32NumBytes is the number of bytes of data available to be processed. +// +// This function is called whenever we receive a notification that data is +// available from the host. We read the data, byte-by-byte and swap the case +// of any alphabetical characters found then write it back out to be +// transmitted back to the host. +// +// \return Returns the number of bytes of data processed. +// +//***************************************************************************** +static uint32_t +EchoNewDataToHost(tUSBDBulkDevice *psDevice, uint8_t *pi8Data, + uint_fast32_t ui32NumBytes) +{ + uint_fast32_t ui32Loop, ui32Space, ui32Count; + uint_fast32_t ui32ReadIndex; + uint_fast32_t ui32WriteIndex; + tUSBRingBufObject sTxRing; + + // + // Get the current buffer information to allow us to write directly to + // the transmit buffer (we already have enough information from the + // parameters to access the receive buffer directly). + // + USBBufferInfoGet(&g_sTxBuffer, &sTxRing); + + // + // How much space is there in the transmit buffer? + // + ui32Space = USBBufferSpaceAvailable(&g_sTxBuffer); + + // + // How many characters can we process this time round? + // + ui32Loop = (ui32Space < ui32NumBytes) ? ui32Space : ui32NumBytes; + ui32Count = ui32Loop; + + // + // Update our receive counter. + // + g_ui32RxCount += ui32NumBytes; + + // + // Dump a debug message. + // + DEBUG_PRINT("Received %d bytes\n", ui32NumBytes); + + // + // Set up to process the characters by directly accessing the USB buffers. + // + ui32ReadIndex = (uint32_t)(pi8Data - g_pui8USBRxBuffer); + ui32WriteIndex = sTxRing.ui32WriteIndex; + + while(ui32Loop) + { + // + // Copy from the receive buffer to the transmit buffer converting + // character case on the way. + // + + // + // Is this a lower case character? + // + if((g_pui8USBRxBuffer[ui32ReadIndex] >= 'a') && + (g_pui8USBRxBuffer[ui32ReadIndex] <= 'z')) + { + // + // Convert to upper case and write to the transmit buffer. + // + g_pui8USBTxBuffer[ui32WriteIndex] = + (g_pui8USBRxBuffer[ui32ReadIndex] - 'a') + 'A'; + } + else + { + // + // Is this an upper case character? + // + if((g_pui8USBRxBuffer[ui32ReadIndex] >= 'A') && + (g_pui8USBRxBuffer[ui32ReadIndex] <= 'Z')) + { + // + // Convert to lower case and write to the transmit buffer. + // + g_pui8USBTxBuffer[ui32WriteIndex] = + (g_pui8USBRxBuffer[ui32ReadIndex] - 'Z') + 'z'; + } + else + { + // + // Copy the received character to the transmit buffer. + // + g_pui8USBTxBuffer[ui32WriteIndex] = + g_pui8USBRxBuffer[ui32ReadIndex]; + } + } + + // + // Move to the next character taking care to adjust the pointer for + // the buffer wrap if necessary. + // + ui32WriteIndex++; + ui32WriteIndex = + (ui32WriteIndex == BULK_BUFFER_SIZE) ? 0 : ui32WriteIndex; + + ui32ReadIndex++; + ui32ReadIndex = (ui32ReadIndex == BULK_BUFFER_SIZE) ? 0 : ui32ReadIndex; + + ui32Loop--; + } + + // + // We've processed the data in place so now send the processed data + // back to the host. + // + USBBufferDataWritten(&g_sTxBuffer, ui32Count); + + DEBUG_PRINT("Wrote %d bytes\n", ui32Count); + + // + // We processed as much data as we can directly from the receive buffer so + // we need to return the number of bytes to allow the lower layer to + // update its read pointer appropriately. + // + return(ui32Count); +} + +//***************************************************************************** +// +// Shows the status string on the display. +// +// \param psContext is a pointer to the graphics context representing the +// display. +// \param pi8Status is a pointer to the string to be shown. +// +//***************************************************************************** +void +DisplayStatus(tContext *psContext, char *pcStatus) +{ + tRectangle sRectLine; + int32_t i32Y; + + // + // Calculate the Y coordinate of the top left of the character cell + // for our line of text. + // + i32Y = (GrContextDpyHeightGet(psContext) / 4) - + (GrFontHeightGet(TEXT_FONT) / 2); + + // + // Determine the bounding rectangle for this line of text. We add 4 pixels + // to the height just to ensure that we clear a couple of pixels above and + // below the line of text. + // + sRectLine.i16XMin = 0; + sRectLine.i16XMax = GrContextDpyWidthGet(psContext) - 1; + sRectLine.i16YMin = i32Y; + sRectLine.i16YMax = i32Y + GrFontHeightGet(TEXT_FONT) + 3; + + // + // Clear the line with black. + // + GrContextForegroundSet(&g_sContext, ClrBlack); + GrRectFill(psContext, &sRectLine); + + // + // Draw the new status string + // + DEBUG_PRINT("%s\n", pcStatus); + GrContextForegroundSet(&g_sContext, ClrWhite); + GrStringDrawCentered(psContext, pcStatus, -1, + GrContextDpyWidthGet(psContext) / 2, + GrContextDpyHeightGet(psContext) / 4 , false); +} + +//***************************************************************************** +// +// Handles bulk driver notifications related to the transmit channel (data to +// the USB host). +// +// \param pvCBData is the client-supplied callback pointer for this channel. +// \param ulEvent identifies the event we are being notified about. +// \param ulMsgValue is an event-specific value. +// \param pvMsgData is an event-specific pointer. +// +// This function is called by the bulk driver to notify us of any events +// related to operation of the transmit data channel (the IN channel carrying +// data to the USB host). +// +// \return The return value is event-specific. +// +//***************************************************************************** +uint32_t +TxHandler(void *pvCBData, uint32_t ui32Event, uint32_t ui32MsgValue, + void *pvMsgData) +{ + // + // We are not required to do anything in response to any transmit event + // in this example. All we do is update our transmit counter. + // + if(ui32Event == USB_EVENT_TX_COMPLETE) + { + g_ui32TxCount += ui32MsgValue; + } + + // + // Dump a debug message. + // + DEBUG_PRINT("TX complete %d\n", ui32MsgValue); + + return(0); +} + +//***************************************************************************** +// +// Handles bulk driver notifications related to the receive channel (data from +// the USB host). +// +// \param pvCBData is the client-supplied callback pointer for this channel. +// \param ui32Event identifies the event we are being notified about. +// \param ui32MsgValue is an event-specific value. +// \param pvMsgData is an event-specific pointer. +// +// This function is called by the bulk driver to notify us of any events +// related to operation of the receive data channel (the OUT channel carrying +// data from the USB host). +// +// \return The return value is event-specific. +// +//***************************************************************************** +uint32_t +RxHandler(void *pvCBData, uint32_t ui32Event, uint32_t ui32MsgValue, + void *pvMsgData) +{ + // + // Which event are we being sent? + // + switch(ui32Event) + { + // + // We are connected to a host and communication is now possible. + // + case USB_EVENT_CONNECTED: + { + g_bUSBConfigured = true; + g_pcStatus = "Host connected."; + g_ui32Flags |= COMMAND_STATUS_UPDATE; + + // + // Flush our buffers. + // + USBBufferFlush(&g_sTxBuffer); + USBBufferFlush(&g_sRxBuffer); + + break; + } + + // + // The host has disconnected. + // + case USB_EVENT_DISCONNECTED: + { + g_bUSBConfigured = false; + g_pcStatus = "Host disconnected."; + g_ui32Flags |= COMMAND_STATUS_UPDATE; + break; + } + + // + // A new packet has been received. + // + case USB_EVENT_RX_AVAILABLE: + { + tUSBDBulkDevice *psDevice; + + // + // Get a pointer to our instance data from the callback data + // parameter. + // + psDevice = (tUSBDBulkDevice *)pvCBData; + + // + // Read the new packet and echo it back to the host. + // + return(EchoNewDataToHost(psDevice, pvMsgData, ui32MsgValue)); + } + + // + // Ignore SUSPEND and RESUME for now. + // + case USB_EVENT_SUSPEND: + case USB_EVENT_RESUME: + break; + + // + // Ignore all other events and return 0. + // + default: + break; + } + + return(0); +} + +//***************************************************************************** +// +// This is the main application entry function. +// +//***************************************************************************** +int +main(void) +{ + uint_fast32_t ui32TxCount; + uint_fast32_t ui32RxCount; + char pcBuffer[16]; + uint32_t ui32SysClock; + + // + // Run from the PLL at 120 MHz. + // + ui32SysClock = MAP_SysCtlClockFreqSet((SYSCTL_XTAL_25MHZ | + SYSCTL_OSC_MAIN | SYSCTL_USE_PLL | + SYSCTL_CFG_VCO_480), 120000000); + + // + // Configure the device pins. + // + PinoutSet(); + + // + // Initialize the display driver. + // + Kentec320x240x16_SSD2119Init(ui32SysClock); + + // + // Initialize the graphics context. + // + GrContextInit(&g_sContext, &g_sKentec320x240x16_SSD2119); + + // + // Draw the application frame. + // + FrameDraw(&g_sContext, "usb-dev-bulk"); + +#ifdef DEBUG + // + // Enable UART0 + // + ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0); + + // + // Initialize the UART for console I/O. + // + UARTStdioConfig(0, 115200, ui32SysClock); +#endif + + // + // Not configured initially. + // + g_bUSBConfigured = false; + + // + // Show the various static text elements on the color STN display. + // + GrContextFontSet(&g_sContext, TEXT_FONT); + GrStringDraw(&g_sContext, "Tx bytes:", -1, 110, 100, false); + GrStringDraw(&g_sContext, "Rx bytes:", -1, 110, 130, false); + + // + // Enable the system tick. + // + ROM_SysTickPeriodSet(ui32SysClock / SYSTICKS_PER_SECOND); + ROM_SysTickIntEnable(); + ROM_SysTickEnable(); + + // + // Show the application name on the display and UART output. + // + DEBUG_PRINT("\nTiva C Series USB bulk device example\n"); + DEBUG_PRINT("---------------------------------\n\n"); + + // + // Tell the user what we are up to. + // + DisplayStatus(&g_sContext, " Configuring USB... "); + + // + // Initialize the transmit and receive buffers. + // + USBBufferInit(&g_sTxBuffer); + USBBufferInit(&g_sRxBuffer); + + // + // Initialize the USB stack for device mode. + // + USBStackModeSet(0, eUSBModeDevice, 0); + + // + // Pass our device information to the USB library and place the device + // on the bus. + // + USBDBulkInit(0, &g_sBulkDevice); + + // + // Wait for initial configuration to complete. + // + DisplayStatus(&g_sContext, "Waiting for host..."); + + // + // Clear our local byte counters. + // + ui32RxCount = 0; + ui32TxCount = 0; + + // + // Main application loop. + // + while(1) + { + + // + // Have we been asked to update the status display? + // + if(g_ui32Flags & COMMAND_STATUS_UPDATE) + { + // + // Clear the command flag + // + g_ui32Flags &= ~COMMAND_STATUS_UPDATE; + DisplayStatus(&g_sContext, g_pcStatus); + } + + // + // Has there been any transmit traffic since we last checked? + // + if(ui32TxCount != g_ui32TxCount) + { + // + // Take a snapshot of the latest transmit count. + // + ui32TxCount = g_ui32TxCount; + + // + // Update the display of bytes transmitted by the UART. + // + usnprintf(pcBuffer, 16, " %d ", ui32TxCount); + GrStringDraw(&g_sContext, pcBuffer, -1, 190, 100, true); + } + + // + // Has there been any receive traffic since we last checked? + // + if(ui32RxCount != g_ui32RxCount) + { + // + // Take a snapshot of the latest receive count. + // + ui32RxCount = g_ui32RxCount; + + // + // Update the display of bytes received by the UART. + // + usnprintf(pcBuffer, 16, " %d ", ui32RxCount); + GrStringDraw(&g_sContext, pcBuffer, -1, 190, 130, true); + } + } +} diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewd b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewd new file mode 100644 index 0000000..484e41a --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewd @@ -0,0 +1,614 @@ + + + + 1 + + Debug + + ARM + + 1 + + C-SPY + 2 + + 15 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + ANGEL_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IARROM_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + JLINK_ID + 2 + + 9 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 1 + 1 + 1 + + + + + + + + MACRAIGOR_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + RDI_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin + 1 + + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewp b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewp new file mode 100644 index 0000000..41dce5d --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ewp @@ -0,0 +1,811 @@ + + + + 1 + + Debug + + ARM + + 1 + + General + 3 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 19 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 7 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 5 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Libraries + + $PROJ_DIR$\..\..\..\..\driverlib\ewarm\Exe\driverlib.a + + + $PROJ_DIR$\..\..\..\..\grlib\ewarm\Exe\grlib.a + + + $PROJ_DIR$\..\..\..\..\usblib\ewarm\Exe\usblib.a + + + + Source + + $PROJ_DIR$\..\drivers\frame.c + + + $PROJ_DIR$\..\drivers\kentec320x240x16_ssd2119.c + + + $PROJ_DIR$\..\drivers\pinout.c + + + $PROJ_DIR$\startup_ewarm.c + + + $PROJ_DIR$\..\..\..\..\utils\uartstdio.c + + + $PROJ_DIR$\usb_bulk_structs.c + + + $PROJ_DIR$\usb_dev_bulk.c + + + $PROJ_DIR$\..\..\..\..\utils\ustdlib.c + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.icf b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.icf new file mode 100644 index 0000000..4097f05 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.icf @@ -0,0 +1,78 @@ +//***************************************************************************** +// +// usb_dev_bulk.icf - Linker configuration file for usb_dev_bulk. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +// +// Define a memory region that covers the entire 4 GB addressible space of the +// processor. +// +define memory mem with size = 4G; + +// +// Define a region for the on-chip flash. +// +define region FLASH = mem:[from 0x00000000 to 0x000fffff]; + +// +// Define a region for the on-chip SRAM. +// +define region SRAM = mem:[from 0x20000000 to 0x2003ffff]; + +// +// Define a block for the heap. The size should be set to something other +// than zero if things in the C library that require the heap are used. +// +define block HEAP with alignment = 8, size = 0x00000000 { }; + +// +// Indicate that the read/write values should be initialized by copying from +// flash. +// +initialize by copy { readwrite }; + +// +// Indicate that the noinit values should be left alone. This includes the +// stack, which if initialized will destroy the return address from the +// initialization code, causing the processor to branch to zero and fault. +// +do not initialize { section .noinit }; + +// +// Place the interrupt vectors at the start of flash. +// +place at start of FLASH { readonly section .intvec }; + +// +// Place the remainder of the read-only items into flash. +// +place in FLASH { readonly }; + +// +// Place the RAM vector table at the start of SRAM. +// +place at start of SRAM { section VTABLE }; + +// +// Place all read/write items into SRAM. +// +place in SRAM { readwrite, block HEAP }; diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ld b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ld new file mode 100644 index 0000000..3694939 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.ld @@ -0,0 +1,57 @@ +/****************************************************************************** + * + * usb_dev_bulk.ld - Linker configuration file for usb_dev_bulk. + * + * Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. + * Software License Agreement + * + * Texas Instruments (TI) is supplying this software for use solely and + * exclusively on TI's microcontroller products. The software is owned by + * TI and/or its suppliers, and is protected under applicable copyright + * laws. You may not combine this software with "viral" open-source + * software in order to form a larger program. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. + * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT + * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY + * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL + * DAMAGES, FOR ANY REASON WHATSOEVER. + * + * This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. + * + *****************************************************************************/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 +} + +SECTIONS +{ + .text : + { + _text = .; + KEEP(*(.isr_vector)) + *(.text*) + *(.rodata*) + _etext = .; + } > FLASH + + .data : AT(ADDR(.text) + SIZEOF(.text)) + { + _data = .; + *(vtable) + *(.data*) + _edata = .; + } > SRAM + + .bss : + { + _bss = .; + *(.bss*) + *(COMMON) + _ebss = .; + } > SRAM +} diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.sct b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.sct new file mode 100644 index 0000000..8b0f720 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.sct @@ -0,0 +1,47 @@ +;****************************************************************************** +; +; usb_dev_bulk.sct - Linker configuration file for usb_dev_bulk. +; +; Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +; Software License Agreement +; +; Texas Instruments (TI) is supplying this software for use solely and +; exclusively on TI's microcontroller products. The software is owned by +; TI and/or its suppliers, and is protected under applicable copyright +; laws. You may not combine this software with "viral" open-source +; software in order to form a larger program. +; +; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +; DAMAGES, FOR ANY REASON WHATSOEVER. +; +; This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +; +;****************************************************************************** + +LR_IROM 0x00000000 0x00100000 +{ + ; + ; Specify the Execution Address of the code and the size. + ; + ER_IROM 0x00000000 0x00100000 + { + *.o (RESET, +First) + * (InRoot$$Sections, +RO) + } + + ; + ; Specify the Execution Address of the data area. + ; + RW_IRAM 0x20000000 0x00040000 + { + ; + ; Uncomment the following line in order to use IntRegister(). + ; + ;* (vtable, +First) + * (+RW, +ZI) + } +} diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvopt b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvopt new file mode 100644 index 0000000..dda4eee --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvopt @@ -0,0 +1,401 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + usb_dev_bulk + 0x4 + ARM-ADS + + 25000000 + + 1 + 1 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\rvmdk\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + + 0 + Data Sheet + DATASHTS\Luminary\TM4C129XNCZAD.PDF + + + + SARMCM3.DLL + -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 0 + 1 + 0 + 0 + 4 + + + + + + + + + + + BIN\lmidk-agdi.dll + + + + 0 + lmidk-agdi + -O4614 -S1 -FO29 + + + 0 + DLGTARM + + + + 0 + ARMDBGFLAGS + + + + + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + Source + 1 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\drivers\frame.c + frame.c + + + 1 + 2 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\drivers\kentec320x240x16_ssd2119.c + kentec320x240x16_ssd2119.c + + + 1 + 3 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\drivers\pinout.c + pinout.c + + + 1 + 4 + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + .\startup_rvmdk.S + startup_rvmdk.S + + + 1 + 5 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\..\..\utils\uartstdio.c + uartstdio.c + + + 1 + 6 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + .\usb_bulk_structs.c + usb_bulk_structs.c + + + 1 + 7 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + .\usb_dev_bulk.c + usb_dev_bulk.c + + + 1 + 8 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\..\..\utils\ustdlib.c + ustdlib.c + + + + + Libraries + 1 + 0 + 0 + + 2 + 9 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\..\..\driverlib\rvmdk\driverlib.lib + driverlib.lib + + + 2 + 10 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\..\..\grlib\rvmdk\grlib.lib + grlib.lib + + + 2 + 11 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\..\..\usblib\rvmdk\usblib.lib + usblib.lib + + + + + Documentation + 1 + 0 + 0 + + 3 + 12 + 5 + 0 + 1 + 0 + 0 + 1 + 1 + 0 + .\readme.txt + readme.txt + + 44 + 0 + 1 + + -1 + -1 + + + -1 + -1 + + + 0 + 0 + 729 + 300 + + + + + + + 1 + 0 + + 100 + 0 + + + .\readme.txt + 0 + 1 + 1 + + + + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvproj b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvproj new file mode 100644 index 0000000..4e0d7e4 --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk.uvproj @@ -0,0 +1,464 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + usb_dev_bulk + 0x4 + ARM-ADS + + + TM4C129XNCZAD + Texas Instruments + IRAM(0x20000000-0x2003FFFF) IROM(0-0xFFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 + + "STARTUP\Luminary\Startup.s" ("Luminary Startup Code") + UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_1024 -FS00 -FL0100000) + 5919 + LM4Fxxxx.H + + + + + + + + + + 0 + + + + Luminary\ + Luminary\ + + 0 + 0 + 0 + 0 + 1 + + .\rvmdk\ + usb_dev_bulk + 1 + 0 + 0 + 1 + 1 + .\rvmdk\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 1 + 0 + fromelf --bin --output .\rvmdk\usb_dev_bulk.bin .\rvmdk\usb_dev_bulk.axf + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 0 + 1 + 1 + 1 + 0 + 1 + + 0 + 4 + + + + + + + + + + + + + + BIN\lmidk-agdi.dll + + + + + 1 + 0 + 0 + 0 + 1 + 4099 + + BIN\lmidk-agdi.dll + + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 1 + 0x0 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + + + + 0 + 3 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + + --c99 + rvmdk PART_TM4C129XNCZAD TARGET_IS_TM4C129_RA0 UART_BUFFERED + + ..;..\..\..\..; + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x20000000 + usb_dev_bulk.sct + + + --entry Reset_Handler + + + + + + + + Source + + + frame.c + 1 + ..\drivers\frame.c + + + kentec320x240x16_ssd2119.c + 1 + ..\drivers\kentec320x240x16_ssd2119.c + + + pinout.c + 1 + ..\drivers\pinout.c + + + startup_rvmdk.S + 2 + .\startup_rvmdk.S + + + uartstdio.c + 1 + ..\..\..\..\utils\uartstdio.c + + + usb_bulk_structs.c + 1 + .\usb_bulk_structs.c + + + usb_dev_bulk.c + 1 + .\usb_dev_bulk.c + + + ustdlib.c + 1 + ..\..\..\..\utils\ustdlib.c + + + + + Libraries + + + driverlib.lib + 4 + ..\..\..\..\driverlib\rvmdk\driverlib.lib + + + grlib.lib + 4 + ..\..\..\..\grlib\rvmdk\grlib.lib + + + usblib.lib + 4 + ..\..\..\..\usblib\rvmdk\usblib.lib + + + + + Documentation + + + readme.txt + 5 + .\readme.txt + + + + + + + + diff --git a/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk_ccs.cmd b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk_ccs.cmd new file mode 100644 index 0000000..f0821ed --- /dev/null +++ b/boards/dk-tm4c129x/usb_dev_bulk/usb_dev_bulk_ccs.cmd @@ -0,0 +1,70 @@ +/****************************************************************************** + * + * usb_dev_bulk_ccs.cmd - CCS linker configuration file for usb_dev_bulk. + * + * Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. + * Software License Agreement + * + * Texas Instruments (TI) is supplying this software for use solely and + * exclusively on TI's microcontroller products. The software is owned by + * TI and/or its suppliers, and is protected under applicable copyright + * laws. You may not combine this software with "viral" open-source + * software in order to form a larger program. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. + * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT + * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY + * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL + * DAMAGES, FOR ANY REASON WHATSOEVER. + * + * This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. + * + *****************************************************************************/ + +--retain=g_pfnVectors + +/* The following command line options are set as part of the CCS project. */ +/* If you are building using the command line, or for some reason want to */ +/* define them here, you can uncomment and modify these lines as needed. */ +/* If you are using CCS for building, it is probably better to make any such */ +/* modifications in your CCS project and leave this file alone. */ +/* */ +/* --heap_size=0 */ +/* --stack_size=256 */ +/* --library=rtsv7M3_T_le_eabi.lib */ + +/* The starting address of the application. Normally the interrupt vectors */ +/* must be located at the beginning of the application. */ +#define APP_BASE 0x00000000 +#define RAM_BASE 0x20000000 + +/* System memory map */ + +MEMORY +{ + /* Application stored in and executes from internal flash */ + FLASH (RX) : origin = APP_BASE, length = 0x00100000 + /* Application uses internal RAM for data */ + SRAM (RWX) : origin = 0x20000000, length = 0x00040000 +} + +/* Section allocation in memory */ + +SECTIONS +{ + .intvecs: > APP_BASE + .text : > FLASH + .const : > FLASH + .cinit : > FLASH + .pinit : > FLASH + .init_array : > FLASH + + .vtable : > RAM_BASE + .data : > SRAM + .bss : > SRAM + .sysmem : > SRAM + .stack : > SRAM +} + +__STACK_TOP = __stack + 1024; -- cgit v1.3.1