From c3e4c9a25c2910d2d66d52215b3406b13d5b23d5 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Sun, 29 Jun 2014 12:34:32 +0300 Subject: Add more board models --- .../dk-tm4c129x/boot_emac_flash/boot_emac_flash.c | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 boards/dk-tm4c129x/boot_emac_flash/boot_emac_flash.c (limited to 'boards/dk-tm4c129x/boot_emac_flash/boot_emac_flash.c') diff --git a/boards/dk-tm4c129x/boot_emac_flash/boot_emac_flash.c b/boards/dk-tm4c129x/boot_emac_flash/boot_emac_flash.c new file mode 100644 index 0000000..90c424d --- /dev/null +++ b/boards/dk-tm4c129x/boot_emac_flash/boot_emac_flash.c @@ -0,0 +1,52 @@ +//***************************************************************************** +// +// boot_emac_flash.c - Ethernet flash-based boot loader description. +// +// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package. +// +//***************************************************************************** + +// +// This file is just a stub to hold the following doc comments +// + +//***************************************************************************** +// +//! \addtogroup example_list +//!

Ethernet flash-based Boot Loader (boot_emac_flash)

+//! +//! The boot loader is a small piece of code that can be programmed at the +//! beginning of flash to act as an application loader as well as an update +//! mechanism for an application running on a Tiva microcontroller, +//! utilizing either UART0, USB, or Ethernet. The capabilities of the +//! boot loader are configured via the bl_config.h include file. For this +//! example, the boot loader uses Ethernet to load an application. +//! +//! The configuration is set to boot applications which are linked to run from +//! address 0x4000 in flash. This is minimal address since the flash erase +//! size is 16K bytes. +//! +//! Please note that LMFlash programmer version number needs to be at +//! least 1588 or later. Older LMFlash programmer doesn't work with this +//! Ethernet boot loader. +//! +// +//***************************************************************************** + + -- cgit v1.3.1