Capacitive Touch Example

An example that works with the 430BOOST-SENSE1 capactive sense 
BoosterPack, originally designed for the MSP430 LaunchPad.  

The Stellaris LM4F120H5QR does not have the capacitive sense hardware
assisted peripheral features of some MSP430 chips. Therefore it is
required that the user install surface mount resistors on the pads
provided on the bottom of the capacitive sense BoosterPack. Resistor values
of 30 ohms are recommended. Calibration may be required for
resistor values other than 30 ohms.


-------------------------------------------------------------------------------

Copyright (c) 2011-2012 Texas Instruments Incorporated.  All rights reserved.
Software License Agreement

Texas Instruments (TI) is supplying this software for use solely and
exclusively on TI's microcontroller products. The software is owned by
TI and/or its suppliers, and is protected under applicable copyright
laws. You may not combine this software with "viral" open-source
software in order to form a larger program.

THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, FOR ANY REASON WHATSOEVER.

This is part of revision 9453 of the EK-LM4F120XL Firmware Package.