From 48395c0348a1a3fa3330e397d2463f62ff5c45c7 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Mon, 29 Oct 2012 23:04:06 +0200 Subject: Dir structure overhaul --- project0/startup_rvmdk.S | 351 ----------------------------------------------- 1 file changed, 351 deletions(-) delete mode 100644 project0/startup_rvmdk.S (limited to 'project0/startup_rvmdk.S') diff --git a/project0/startup_rvmdk.S b/project0/startup_rvmdk.S deleted file mode 100644 index 53d4dc9..0000000 --- a/project0/startup_rvmdk.S +++ /dev/null @@ -1,351 +0,0 @@ -; <<< Use Configuration Wizard in Context Menu >>> -;****************************************************************************** -; -; startup_rvmdk.S - Startup code for use with Keil's uVision. -; -; Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved. -; Software License Agreement -; -; Texas Instruments (TI) is supplying this software for use solely and -; exclusively on TI's microcontroller products. The software is owned by -; TI and/or its suppliers, and is protected under applicable copyright -; laws. You may not combine this software with "viral" open-source -; software in order to form a larger program. -; -; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. -; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT -; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY -; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL -; DAMAGES, FOR ANY REASON WHATSOEVER. -; -; This is part of revision 9453 of the EK-LM4F120XL Firmware Package. -; -;****************************************************************************** - -;****************************************************************************** -; -; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; -;****************************************************************************** -Stack EQU 0x00000100 - -;****************************************************************************** -; -; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; -;****************************************************************************** -Heap EQU 0x00000000 - -;****************************************************************************** -; -; Allocate space for the stack. -; -;****************************************************************************** - AREA STACK, NOINIT, READWRITE, ALIGN=3 -StackMem - SPACE Stack -__initial_sp - -;****************************************************************************** -; -; Allocate space for the heap. -; -;****************************************************************************** - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -HeapMem - SPACE Heap -__heap_limit - -;****************************************************************************** -; -; Indicate that the code in this file preserves 8-byte alignment of the stack. -; -;****************************************************************************** - PRESERVE8 - -;****************************************************************************** -; -; Place code into the reset code section. -; -;****************************************************************************** - AREA RESET, CODE, READONLY - THUMB - -;****************************************************************************** -; -; The vector table. -; -;****************************************************************************** - EXPORT __Vectors -__Vectors - DCD StackMem + Stack ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NmiSR ; NMI Handler - DCD FaultISR ; Hard Fault Handler - DCD IntDefaultHandler ; The MPU fault handler - DCD IntDefaultHandler ; The bus fault handler - DCD IntDefaultHandler ; The usage fault handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD IntDefaultHandler ; SVCall handler - DCD IntDefaultHandler ; Debug monitor handler - DCD 0 ; Reserved - DCD IntDefaultHandler ; The PendSV handler - DCD IntDefaultHandler ; The SysTick handler - DCD IntDefaultHandler ; GPIO Port A - DCD IntDefaultHandler ; GPIO Port B - DCD IntDefaultHandler ; GPIO Port C - DCD IntDefaultHandler ; GPIO Port D - DCD IntDefaultHandler ; GPIO Port E - DCD IntDefaultHandler ; UART0 Rx and Tx - DCD IntDefaultHandler ; UART1 Rx and Tx - DCD IntDefaultHandler ; SSI0 Rx and Tx - DCD IntDefaultHandler ; I2C0 Master and Slave - DCD IntDefaultHandler ; PWM Fault - DCD IntDefaultHandler ; PWM Generator 0 - DCD IntDefaultHandler ; PWM Generator 1 - DCD IntDefaultHandler ; PWM Generator 2 - DCD IntDefaultHandler ; Quadrature Encoder 0 - DCD IntDefaultHandler ; ADC Sequence 0 - DCD IntDefaultHandler ; ADC Sequence 1 - DCD IntDefaultHandler ; ADC Sequence 2 - DCD IntDefaultHandler ; ADC Sequence 3 - DCD IntDefaultHandler ; Watchdog timer - DCD IntDefaultHandler ; Timer 0 subtimer A - DCD IntDefaultHandler ; Timer 0 subtimer B - DCD IntDefaultHandler ; Timer 1 subtimer A - DCD IntDefaultHandler ; Timer 1 subtimer B - DCD IntDefaultHandler ; Timer 2 subtimer A - DCD IntDefaultHandler ; Timer 2 subtimer B - DCD IntDefaultHandler ; Analog Comparator 0 - DCD IntDefaultHandler ; Analog Comparator 1 - DCD IntDefaultHandler ; Analog Comparator 2 - DCD IntDefaultHandler ; System Control (PLL, OSC, BO) - DCD IntDefaultHandler ; FLASH Control - DCD IntDefaultHandler ; GPIO Port F - DCD IntDefaultHandler ; GPIO Port G - DCD IntDefaultHandler ; GPIO Port H - DCD IntDefaultHandler ; UART2 Rx and Tx - DCD IntDefaultHandler ; SSI1 Rx and Tx - DCD IntDefaultHandler ; Timer 3 subtimer A - DCD IntDefaultHandler ; Timer 3 subtimer B - DCD IntDefaultHandler ; I2C1 Master and Slave - DCD IntDefaultHandler ; Quadrature Encoder 1 - DCD IntDefaultHandler ; CAN0 - DCD IntDefaultHandler ; CAN1 - DCD IntDefaultHandler ; CAN2 - DCD IntDefaultHandler ; Ethernet - DCD IntDefaultHandler ; Hibernate - DCD IntDefaultHandler ; USB0 - DCD IntDefaultHandler ; PWM Generator 3 - DCD IntDefaultHandler ; uDMA Software Transfer - DCD IntDefaultHandler ; uDMA Error - DCD IntDefaultHandler ; ADC1 Sequence 0 - DCD IntDefaultHandler ; ADC1 Sequence 1 - DCD IntDefaultHandler ; ADC1 Sequence 2 - DCD IntDefaultHandler ; ADC1 Sequence 3 - DCD IntDefaultHandler ; I2S0 - DCD IntDefaultHandler ; External Bus Interface 0 - DCD IntDefaultHandler ; GPIO Port J - DCD IntDefaultHandler ; GPIO Port K - DCD IntDefaultHandler ; GPIO Port L - DCD IntDefaultHandler ; SSI2 Rx and Tx - DCD IntDefaultHandler ; SSI3 Rx and Tx - DCD IntDefaultHandler ; UART3 Rx and Tx - DCD IntDefaultHandler ; UART4 Rx and Tx - DCD IntDefaultHandler ; UART5 Rx and Tx - DCD IntDefaultHandler ; UART6 Rx and Tx - DCD IntDefaultHandler ; UART7 Rx and Tx - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD IntDefaultHandler ; I2C2 Master and Slave - DCD IntDefaultHandler ; I2C3 Master and Slave - DCD IntDefaultHandler ; Timer 4 subtimer A - DCD IntDefaultHandler ; Timer 4 subtimer B - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD IntDefaultHandler ; Timer 5 subtimer A - DCD IntDefaultHandler ; Timer 5 subtimer B - DCD IntDefaultHandler ; Wide Timer 0 subtimer A - DCD IntDefaultHandler ; Wide Timer 0 subtimer B - DCD IntDefaultHandler ; Wide Timer 1 subtimer A - DCD IntDefaultHandler ; Wide Timer 1 subtimer B - DCD IntDefaultHandler ; Wide Timer 2 subtimer A - DCD IntDefaultHandler ; Wide Timer 2 subtimer B - DCD IntDefaultHandler ; Wide Timer 3 subtimer A - DCD IntDefaultHandler ; Wide Timer 3 subtimer B - DCD IntDefaultHandler ; Wide Timer 4 subtimer A - DCD IntDefaultHandler ; Wide Timer 4 subtimer B - DCD IntDefaultHandler ; Wide Timer 5 subtimer A - DCD IntDefaultHandler ; Wide Timer 5 subtimer B - DCD IntDefaultHandler ; FPU - DCD IntDefaultHandler ; PECI 0 - DCD IntDefaultHandler ; LPC 0 - DCD IntDefaultHandler ; I2C4 Master and Slave - DCD IntDefaultHandler ; I2C5 Master and Slave - DCD IntDefaultHandler ; GPIO Port M - DCD IntDefaultHandler ; GPIO Port N - DCD IntDefaultHandler ; Quadrature Encoder 2 - DCD IntDefaultHandler ; Fan 0 - DCD 0 ; Reserved - DCD IntDefaultHandler ; GPIO Port P (Summary or P0) - DCD IntDefaultHandler ; GPIO Port P1 - DCD IntDefaultHandler ; GPIO Port P2 - DCD IntDefaultHandler ; GPIO Port P3 - DCD IntDefaultHandler ; GPIO Port P4 - DCD IntDefaultHandler ; GPIO Port P5 - DCD IntDefaultHandler ; GPIO Port P6 - DCD IntDefaultHandler ; GPIO Port P7 - DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0) - DCD IntDefaultHandler ; GPIO Port Q1 - DCD IntDefaultHandler ; GPIO Port Q2 - DCD IntDefaultHandler ; GPIO Port Q3 - DCD IntDefaultHandler ; GPIO Port Q4 - DCD IntDefaultHandler ; GPIO Port Q5 - DCD IntDefaultHandler ; GPIO Port Q6 - DCD IntDefaultHandler ; GPIO Port Q7 - DCD IntDefaultHandler ; GPIO Port R - DCD IntDefaultHandler ; GPIO Port S - DCD IntDefaultHandler ; PWM 1 Generator 0 - DCD IntDefaultHandler ; PWM 1 Generator 1 - DCD IntDefaultHandler ; PWM 1 Generator 2 - DCD IntDefaultHandler ; PWM 1 Generator 3 - DCD IntDefaultHandler ; PWM 1 Fault - -;****************************************************************************** -; -; This is the code that gets called when the processor first starts execution -; following a reset event. -; -;****************************************************************************** - EXPORT Reset_Handler -Reset_Handler - ; - ; Enable the floating-point unit. This must be done here to handle the - ; case where main() uses floating-point and the function prologue saves - ; floating-point registers (which will fault if floating-point is not - ; enabled). Any configuration of the floating-point unit using - ; DriverLib APIs must be done here prior to the floating-point unit - ; being enabled. - ; - ; Note that this does not use DriverLib since it might not be included - ; in this project. - ; - MOVW R0, #0xED88 - MOVT R0, #0xE000 - LDR R1, [R0] - ORR R1, #0x00F00000 - STR R1, [R0] - - ; - ; Call the C library enty point that handles startup. This will copy - ; the .data section initializers from flash to SRAM and zero fill the - ; .bss section. - ; - IMPORT __main - B __main - -;****************************************************************************** -; -; This is the code that gets called when the processor receives a NMI. This -; simply enters an infinite loop, preserving the system state for examination -; by a debugger. -; -;****************************************************************************** -NmiSR - B NmiSR - -;****************************************************************************** -; -; This is the code that gets called when the processor receives a fault -; interrupt. This simply enters an infinite loop, preserving the system state -; for examination by a debugger. -; -;****************************************************************************** -FaultISR - B FaultISR - -;****************************************************************************** -; -; This is the code that gets called when the processor receives an unexpected -; interrupt. This simply enters an infinite loop, preserving the system state -; for examination by a debugger. -; -;****************************************************************************** -IntDefaultHandler - B IntDefaultHandler - -;****************************************************************************** -; -; Make sure the end of this section is aligned. -; -;****************************************************************************** - ALIGN - -;****************************************************************************** -; -; Some code in the normal code section for initializing the heap and stack. -; -;****************************************************************************** - AREA |.text|, CODE, READONLY - -;****************************************************************************** -; -; The function expected of the C library startup code for defining the stack -; and heap memory locations. For the C library version of the startup code, -; provide this function so that the C library initialization code can find out -; the location of the stack and heap. -; -;****************************************************************************** - IF :DEF: __MICROLIB - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - ELSE - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap -__user_initial_stackheap - LDR R0, =HeapMem - LDR R1, =(StackMem + Stack) - LDR R2, =(HeapMem + Heap) - LDR R3, =StackMem - BX LR - ENDIF - -;****************************************************************************** -; -; Make sure the end of this section is aligned. -; -;****************************************************************************** - ALIGN - -;****************************************************************************** -; -; Tell the assembler that we're done. -; -;****************************************************************************** - END -- cgit v1.3.1