From 48395c0348a1a3fa3330e397d2463f62ff5c45c7 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Mon, 29 Oct 2012 23:04:06 +0200 Subject: Dir structure overhaul --- project0/startup_ccs.c | 291 ------------------------------------------------- 1 file changed, 291 deletions(-) delete mode 100644 project0/startup_ccs.c (limited to 'project0/startup_ccs.c') diff --git a/project0/startup_ccs.c b/project0/startup_ccs.c deleted file mode 100644 index 9f15b47..0000000 --- a/project0/startup_ccs.c +++ /dev/null @@ -1,291 +0,0 @@ -//***************************************************************************** -// -// startup_ccs.c - Startup code for use with TI's Code Composer Studio. -// -// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved. -// Software License Agreement -// -// Texas Instruments (TI) is supplying this software for use solely and -// exclusively on TI's microcontroller products. The software is owned by -// TI and/or its suppliers, and is protected under applicable copyright -// laws. You may not combine this software with "viral" open-source -// software in order to form a larger program. -// -// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. -// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT -// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY -// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL -// DAMAGES, FOR ANY REASON WHATSOEVER. -// -// This is part of revision 9453 of the EK-LM4F120XL Firmware Package. -// -//***************************************************************************** - -//***************************************************************************** -// -// Forward declaration of the default fault handlers. -// -//***************************************************************************** -void ResetISR(void); -static void NmiSR(void); -static void FaultISR(void); -static void IntDefaultHandler(void); - -//***************************************************************************** -// -// External declaration for the reset handler that is to be called when the -// processor is started -// -//***************************************************************************** -extern void _c_int00(void); - -//***************************************************************************** -// -// Linker variable that marks the top of the stack. -// -//***************************************************************************** -extern unsigned long __STACK_TOP; - -//***************************************************************************** -// -// The vector table. Note that the proper constructs must be placed on this to -// ensure that it ends up at physical address 0x0000.0000 or at the start of -// the program if located at a start address other than 0. -// -//***************************************************************************** -#pragma DATA_SECTION(g_pfnVectors, ".intvecs") -void (* const g_pfnVectors[])(void) = -{ - (void (*)(void))((unsigned long)&__STACK_TOP), - // The initial stack pointer - ResetISR, // The reset handler - NmiSR, // The NMI handler - FaultISR, // The hard fault handler - IntDefaultHandler, // The MPU fault handler - IntDefaultHandler, // The bus fault handler - IntDefaultHandler, // The usage fault handler - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - IntDefaultHandler, // SVCall handler - IntDefaultHandler, // Debug monitor handler - 0, // Reserved - IntDefaultHandler, // The PendSV handler - IntDefaultHandler, // The SysTick handler - IntDefaultHandler, // GPIO Port A - IntDefaultHandler, // GPIO Port B - IntDefaultHandler, // GPIO Port C - IntDefaultHandler, // GPIO Port D - IntDefaultHandler, // GPIO Port E - IntDefaultHandler, // UART0 Rx and Tx - IntDefaultHandler, // UART1 Rx and Tx - IntDefaultHandler, // SSI0 Rx and Tx - IntDefaultHandler, // I2C0 Master and Slave - IntDefaultHandler, // PWM Fault - IntDefaultHandler, // PWM Generator 0 - IntDefaultHandler, // PWM Generator 1 - IntDefaultHandler, // PWM Generator 2 - IntDefaultHandler, // Quadrature Encoder 0 - IntDefaultHandler, // ADC Sequence 0 - IntDefaultHandler, // ADC Sequence 1 - IntDefaultHandler, // ADC Sequence 2 - IntDefaultHandler, // ADC Sequence 3 - IntDefaultHandler, // Watchdog timer - IntDefaultHandler, // Timer 0 subtimer A - IntDefaultHandler, // Timer 0 subtimer B - IntDefaultHandler, // Timer 1 subtimer A - IntDefaultHandler, // Timer 1 subtimer B - IntDefaultHandler, // Timer 2 subtimer A - IntDefaultHandler, // Timer 2 subtimer B - IntDefaultHandler, // Analog Comparator 0 - IntDefaultHandler, // Analog Comparator 1 - IntDefaultHandler, // Analog Comparator 2 - IntDefaultHandler, // System Control (PLL, OSC, BO) - IntDefaultHandler, // FLASH Control - IntDefaultHandler, // GPIO Port F - IntDefaultHandler, // GPIO Port G - IntDefaultHandler, // GPIO Port H - IntDefaultHandler, // UART2 Rx and Tx - IntDefaultHandler, // SSI1 Rx and Tx - IntDefaultHandler, // Timer 3 subtimer A - IntDefaultHandler, // Timer 3 subtimer B - IntDefaultHandler, // I2C1 Master and Slave - IntDefaultHandler, // Quadrature Encoder 1 - IntDefaultHandler, // CAN0 - IntDefaultHandler, // CAN1 - IntDefaultHandler, // CAN2 - IntDefaultHandler, // Ethernet - IntDefaultHandler, // Hibernate - IntDefaultHandler, // USB0 - IntDefaultHandler, // PWM Generator 3 - IntDefaultHandler, // uDMA Software Transfer - IntDefaultHandler, // uDMA Error - IntDefaultHandler, // ADC1 Sequence 0 - IntDefaultHandler, // ADC1 Sequence 1 - IntDefaultHandler, // ADC1 Sequence 2 - IntDefaultHandler, // ADC1 Sequence 3 - IntDefaultHandler, // I2S0 - IntDefaultHandler, // External Bus Interface 0 - IntDefaultHandler, // GPIO Port J - IntDefaultHandler, // GPIO Port K - IntDefaultHandler, // GPIO Port L - IntDefaultHandler, // SSI2 Rx and Tx - IntDefaultHandler, // SSI3 Rx and Tx - IntDefaultHandler, // UART3 Rx and Tx - IntDefaultHandler, // UART4 Rx and Tx - IntDefaultHandler, // UART5 Rx and Tx - IntDefaultHandler, // UART6 Rx and Tx - IntDefaultHandler, // UART7 Rx and Tx - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - IntDefaultHandler, // I2C2 Master and Slave - IntDefaultHandler, // I2C3 Master and Slave - IntDefaultHandler, // Timer 4 subtimer A - IntDefaultHandler, // Timer 4 subtimer B - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - 0, // Reserved - IntDefaultHandler, // Timer 5 subtimer A - IntDefaultHandler, // Timer 5 subtimer B - IntDefaultHandler, // Wide Timer 0 subtimer A - IntDefaultHandler, // Wide Timer 0 subtimer B - IntDefaultHandler, // Wide Timer 1 subtimer A - IntDefaultHandler, // Wide Timer 1 subtimer B - IntDefaultHandler, // Wide Timer 2 subtimer A - IntDefaultHandler, // Wide Timer 2 subtimer B - IntDefaultHandler, // Wide Timer 3 subtimer A - IntDefaultHandler, // Wide Timer 3 subtimer B - IntDefaultHandler, // Wide Timer 4 subtimer A - IntDefaultHandler, // Wide Timer 4 subtimer B - IntDefaultHandler, // Wide Timer 5 subtimer A - IntDefaultHandler, // Wide Timer 5 subtimer B - IntDefaultHandler, // FPU - IntDefaultHandler, // PECI 0 - IntDefaultHandler, // LPC 0 - IntDefaultHandler, // I2C4 Master and Slave - IntDefaultHandler, // I2C5 Master and Slave - IntDefaultHandler, // GPIO Port M - IntDefaultHandler, // GPIO Port N - IntDefaultHandler, // Quadrature Encoder 2 - IntDefaultHandler, // Fan 0 - 0, // Reserved - IntDefaultHandler, // GPIO Port P (Summary or P0) - IntDefaultHandler, // GPIO Port P1 - IntDefaultHandler, // GPIO Port P2 - IntDefaultHandler, // GPIO Port P3 - IntDefaultHandler, // GPIO Port P4 - IntDefaultHandler, // GPIO Port P5 - IntDefaultHandler, // GPIO Port P6 - IntDefaultHandler, // GPIO Port P7 - IntDefaultHandler, // GPIO Port Q (Summary or Q0) - IntDefaultHandler, // GPIO Port Q1 - IntDefaultHandler, // GPIO Port Q2 - IntDefaultHandler, // GPIO Port Q3 - IntDefaultHandler, // GPIO Port Q4 - IntDefaultHandler, // GPIO Port Q5 - IntDefaultHandler, // GPIO Port Q6 - IntDefaultHandler, // GPIO Port Q7 - IntDefaultHandler, // GPIO Port R - IntDefaultHandler, // GPIO Port S - IntDefaultHandler, // PWM 1 Generator 0 - IntDefaultHandler, // PWM 1 Generator 1 - IntDefaultHandler, // PWM 1 Generator 2 - IntDefaultHandler, // PWM 1 Generator 3 - IntDefaultHandler // PWM 1 Fault -}; - -//***************************************************************************** -// -// This is the code that gets called when the processor first starts execution -// following a reset event. Only the absolutely necessary set is performed, -// after which the application supplied entry() routine is called. Any fancy -// actions (such as making decisions based on the reset cause register, and -// resetting the bits in that register) are left solely in the hands of the -// application. -// -//***************************************************************************** -void -ResetISR(void) -{ - // - // Jump to the CCS C initialization routine. This will enable the - // floating-point unit as well, so that does not need to be done here. - // - __asm(" .global _c_int00\n" - " b.w _c_int00"); -} - -//***************************************************************************** -// -// This is the code that gets called when the processor receives a NMI. This -// simply enters an infinite loop, preserving the system state for examination -// by a debugger. -// -//***************************************************************************** -static void -NmiSR(void) -{ - // - // Enter an infinite loop. - // - while(1) - { - } -} - -//***************************************************************************** -// -// This is the code that gets called when the processor receives a fault -// interrupt. This simply enters an infinite loop, preserving the system state -// for examination by a debugger. -// -//***************************************************************************** -static void -FaultISR(void) -{ - // - // Enter an infinite loop. - // - while(1) - { - } -} - -//***************************************************************************** -// -// This is the code that gets called when the processor receives an unexpected -// interrupt. This simply enters an infinite loop, preserving the system state -// for examination by a debugger. -// -//***************************************************************************** -static void -IntDefaultHandler(void) -{ - // - // Go into an infinite loop. - // - while(1) - { - } -} -- cgit v1.3.1