From 48395c0348a1a3fa3330e397d2463f62ff5c45c7 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Mon, 29 Oct 2012 23:04:06 +0200 Subject: Dir structure overhaul --- project0/project0_ccs.cmd | 70 ----------------------------------------------- 1 file changed, 70 deletions(-) delete mode 100644 project0/project0_ccs.cmd (limited to 'project0/project0_ccs.cmd') diff --git a/project0/project0_ccs.cmd b/project0/project0_ccs.cmd deleted file mode 100644 index 94f8933..0000000 --- a/project0/project0_ccs.cmd +++ /dev/null @@ -1,70 +0,0 @@ -/****************************************************************************** - * - * project0_ccs.cmd - CCS linker configuration file for project0. - * - * Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved. - * Software License Agreement - * - * Texas Instruments (TI) is supplying this software for use solely and - * exclusively on TI's microcontroller products. The software is owned by - * TI and/or its suppliers, and is protected under applicable copyright - * laws. You may not combine this software with "viral" open-source - * software in order to form a larger program. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. - * NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT - * NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY - * CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL - * DAMAGES, FOR ANY REASON WHATSOEVER. - * - * This is part of revision 9453 of the EK-LM4F120XL Firmware Package. - * - *****************************************************************************/ - ---retain=g_pfnVectors - -/* The following command line options are set as part of the CCS project. */ -/* If you are building using the command line, or for some reason want to */ -/* define them here, you can uncomment and modify these lines as needed. */ -/* If you are using CCS for building, it is probably better to make any such */ -/* modifications in your CCS project and leave this file alone. */ -/* */ -/* --heap_size=0 */ -/* --stack_size=256 */ -/* --library=rtsv7M3_T_le_eabi.lib */ - -/* The starting address of the application. Normally the interrupt vectors */ -/* must be located at the beginning of the application. */ -#define APP_BASE 0x00000000 -#define RAM_BASE 0x20000000 - -/* System memory map */ - -MEMORY -{ - /* Application stored in and executes from internal flash */ - FLASH (RX) : origin = APP_BASE, length = 0x00040000 - /* Application uses internal RAM for data */ - SRAM (RWX) : origin = 0x20000000, length = 0x00008000 -} - -/* Section allocation in memory */ - -SECTIONS -{ - .intvecs: > APP_BASE - .text : > FLASH - .const : > FLASH - .cinit : > FLASH - .pinit : > FLASH - .init_array : > FLASH - - .vtable : > RAM_BASE - .data : > SRAM - .bss : > SRAM - .sysmem : > SRAM - .stack : > SRAM -} - -__STACK_TOP = __stack + 256; -- cgit v1.3.1