From 48395c0348a1a3fa3330e397d2463f62ff5c45c7 Mon Sep 17 00:00:00 2001 From: Yuval Adam Date: Mon, 29 Oct 2012 23:04:06 +0200 Subject: Dir structure overhaul --- project0/project0.c | 112 ---------------------------------------------------- 1 file changed, 112 deletions(-) delete mode 100644 project0/project0.c (limited to 'project0/project0.c') diff --git a/project0/project0.c b/project0/project0.c deleted file mode 100644 index 02e2b34..0000000 --- a/project0/project0.c +++ /dev/null @@ -1,112 +0,0 @@ -//***************************************************************************** -// -// project0.c - Example to demonstrate minimal StellarisWare setup -// -// Copyright (c) 2012 Texas Instruments Incorporated. All rights reserved. -// Software License Agreement -// -// Texas Instruments (TI) is supplying this software for use solely and -// exclusively on TI's microcontroller products. The software is owned by -// TI and/or its suppliers, and is protected under applicable copyright -// laws. You may not combine this software with "viral" open-source -// software in order to form a larger program. -// -// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. -// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT -// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY -// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL -// DAMAGES, FOR ANY REASON WHATSOEVER. -// -// This is part of revision 9453 of the EK-LM4F120XL Firmware Package. -// -//***************************************************************************** - -#include "inc/hw_types.h" -#include "inc/hw_memmap.h" -#include "driverlib/sysctl.h" -#include "driverlib/gpio.h" - -//***************************************************************************** -// -// Define pin to LED color mapping. -// -//***************************************************************************** - -#define RED_LED GPIO_PIN_1 -#define BLUE_LED GPIO_PIN_2 -#define GREEN_LED GPIO_PIN_3 - -//***************************************************************************** -// -//! \addtogroup example_list -//!

Project Zero (project0)

-//! -//! This example demonstrates the use of StellarisWare to setup the clocks -//! and toggle GPIO pins to make the LED's blink. This is a good place to -//! start understanding your launchpad and the tools that can be used to -//! program it. See http://www.ti.com/stellaris-launchpad/project0 for more -//! information and tutorial videos. -//! -// -//***************************************************************************** - - -//***************************************************************************** -// -// Main 'C' Language entry point. Toggle an LED using StellarisWare. -// See www.ti.com/stellaris-launchpad/project0 for more information and -// tutorial videos. -// -//***************************************************************************** -int -main(void) -{ - // - // Setup the system clock to run at 50 Mhz from PLL with crystal reference - // - SysCtlClockSet(SYSCTL_SYSDIV_4|SYSCTL_USE_PLL|SYSCTL_XTAL_16MHZ| - SYSCTL_OSC_MAIN); - - // - // Enable and configure the GPIO port for the LED operation. - // - SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF); - GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED); - - // - // Loop Forever - // - while(1) - { - // - // Turn on the LED - // - GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, RED_LED); - - // - // Delay for a bit - // - SysCtlDelay(2000000); - - // - // Turn on the LED - // - GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, BLUE_LED); - - // - // Delay for a bit - // - SysCtlDelay(2000000); - - // - // Turn on the LED - // - GPIOPinWrite(GPIO_PORTF_BASE, RED_LED|BLUE_LED|GREEN_LED, GREEN_LED); - - // - // Delay for a bit - // - SysCtlDelay(2000000); - } -} -- cgit v1.3.1