From 6cff82a4bc7ed9fcc7e9ad73a4542d5b1e7c1328 Mon Sep 17 00:00:00 2001
From: Yuval Adam <yuv.adm@gmail.com>
Date: Wed, 7 Nov 2012 23:31:05 +0200
Subject: Revert "Move RGB and button drivers 2 dirs up"

This reverts commit 3a282de9331ea261eeadca0dd36c0527f173dd4c.
---
 drivers/rgb.h | 143 ----------------------------------------------------------
 1 file changed, 143 deletions(-)
 delete mode 100644 drivers/rgb.h

(limited to 'drivers/rgb.h')

diff --git a/drivers/rgb.h b/drivers/rgb.h
deleted file mode 100644
index 27d2276..0000000
--- a/drivers/rgb.h
+++ /dev/null
@@ -1,143 +0,0 @@
-//*****************************************************************************
-//
-// rgb.h - Prototypes for the evaluation board RGB LED driver.
-//
-// Copyright (c) 2012 Texas Instruments Incorporated.  All rights reserved.
-// Software License Agreement
-// 
-// Texas Instruments (TI) is supplying this software for use solely and
-// exclusively on TI's microcontroller products. The software is owned by
-// TI and/or its suppliers, and is protected under applicable copyright
-// laws. You may not combine this software with "viral" open-source
-// software in order to form a larger program.
-// 
-// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
-// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
-// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
-// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
-// DAMAGES, FOR ANY REASON WHATSOEVER.
-// 
-// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
-//
-//*****************************************************************************
-
-#ifndef __RGBLED_H__
-#define __RGBLED_H__
-
-//*****************************************************************************
-//
-// Defines for the hardware resources used by the pushbuttons.
-//
-// The switches are on the following ports/pins:
-//
-// PF1 - RED    (632 nanometer)
-// PF2 - GREEN  (518 nanometer)
-// PF3 - BLUE   (465 nanometer)
-
-//
-// The RGB LED is tied up to 5V but since the lowest Vf is 1.75 we can still
-// use a General Purpose Timer in pulse out mode.
-//
-//*****************************************************************************
-
-//
-// Indexes into the array of colors
-//
-#define RED                     0
-#define BLUE                    2
-#define GREEN                   1
-
-
-//
-// Ratio for percent of full on that should be "true" white.
-//
-#define RED_WHITE_BALANCE        0.497f
-#define GREEN_WHITE_BALANCE      0.6f
-#define BLUE_WHITE_BALANCE       1.0f
-
-//
-// GPIO, Timer, Peripheral, and Pin assignments for the colors
-//
-#define RED_GPIO_PERIPH         SYSCTL_PERIPH_GPIOF
-#define RED_TIMER_PERIPH        SYSCTL_PERIPH_TIMER0
-#define BLUE_GPIO_PERIPH        SYSCTL_PERIPH_GPIOF
-#define BLUE_TIMER_PERIPH       SYSCTL_PERIPH_TIMER1
-#define GREEN_GPIO_PERIPH       SYSCTL_PERIPH_GPIOF
-#define GREEN_TIMER_PERIPH      SYSCTL_PERIPH_TIMER1
-
-
-#define RED_GPIO_BASE           GPIO_PORTF_BASE
-#define RED_TIMER_BASE          TIMER0_BASE
-#define BLUE_GPIO_BASE          GPIO_PORTF_BASE
-#define BLUE_TIMER_BASE         TIMER1_BASE
-#define GREEN_GPIO_BASE         GPIO_PORTF_BASE
-#define GREEN_TIMER_BASE        TIMER1_BASE
-
-#define RED_GPIO_PIN            GPIO_PIN_1
-#define BLUE_GPIO_PIN           GPIO_PIN_2
-#define GREEN_GPIO_PIN          GPIO_PIN_3
-
-
-#define RED_GPIO_PIN_CFG        GPIO_PF1_T0CCP1
-#define BLUE_GPIO_PIN_CFG       GPIO_PF2_T1CCP0
-#define GREEN_GPIO_PIN_CFG      GPIO_PF3_T1CCP1
-
-#define RED_TIMER_CFG           TIMER_CFG_B_PWM
-#define BLUE_TIMER_CFG          TIMER_CFG_A_PWM
-#define GREEN_TIMER_CFG         TIMER_CFG_B_PWM
-
-#define RED_TIMER               TIMER_B
-#define BLUE_TIMER              TIMER_A
-#define GREEN_TIMER             TIMER_B
-
-
-//*****************************************************************************
-//
-// Useful macros 
-//
-//*****************************************************************************
-
-//*****************************************************************************
-//
-// If building with a C++ compiler, make all of the definitions in this header
-// have a C binding.
-//
-//*****************************************************************************
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-//*****************************************************************************
-//
-// Functions exported from rgb.c
-//
-//*****************************************************************************
-extern void RGBInit(unsigned long ulEnable);
-
-extern void RGBEnable(void);
-extern void RGBDisable(void);
-extern void RGBSet(volatile unsigned long * pulRGBColor, float fIntensity);
-extern void RGBColorSet(volatile unsigned long * pulRGBColor);
-
-extern void RGBIntensitySet(float fIntensity);
-
-extern void RGBGet(unsigned long * pulRGBColor, float * pfIntensity);
-
-//*****************************************************************************
-//
-// Mark the end of the C bindings section for C++ compilers.
-//
-//*****************************************************************************
-#ifdef __cplusplus
-}
-#endif
-
-//*****************************************************************************
-//
-// Prototypes for the globals exported by this driver.
-//
-//*****************************************************************************
-
-#endif // __RGBLED_H__
-- 
cgit v1.3.1