From 3a282de9331ea261eeadca0dd36c0527f173dd4c Mon Sep 17 00:00:00 2001
From: Yuval Adam <yuv.adm@gmail.com>
Date: Wed, 7 Nov 2012 23:18:51 +0200
Subject: Move RGB and button drivers 2 dirs up

---
 drivers/rgb.h | 143 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 143 insertions(+)
 create mode 100644 drivers/rgb.h

(limited to 'drivers/rgb.h')

diff --git a/drivers/rgb.h b/drivers/rgb.h
new file mode 100644
index 0000000..27d2276
--- /dev/null
+++ b/drivers/rgb.h
@@ -0,0 +1,143 @@
+//*****************************************************************************
+//
+// rgb.h - Prototypes for the evaluation board RGB LED driver.
+//
+// Copyright (c) 2012 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 9453 of the EK-LM4F120XL Firmware Package.
+//
+//*****************************************************************************
+
+#ifndef __RGBLED_H__
+#define __RGBLED_H__
+
+//*****************************************************************************
+//
+// Defines for the hardware resources used by the pushbuttons.
+//
+// The switches are on the following ports/pins:
+//
+// PF1 - RED    (632 nanometer)
+// PF2 - GREEN  (518 nanometer)
+// PF3 - BLUE   (465 nanometer)
+
+//
+// The RGB LED is tied up to 5V but since the lowest Vf is 1.75 we can still
+// use a General Purpose Timer in pulse out mode.
+//
+//*****************************************************************************
+
+//
+// Indexes into the array of colors
+//
+#define RED                     0
+#define BLUE                    2
+#define GREEN                   1
+
+
+//
+// Ratio for percent of full on that should be "true" white.
+//
+#define RED_WHITE_BALANCE        0.497f
+#define GREEN_WHITE_BALANCE      0.6f
+#define BLUE_WHITE_BALANCE       1.0f
+
+//
+// GPIO, Timer, Peripheral, and Pin assignments for the colors
+//
+#define RED_GPIO_PERIPH         SYSCTL_PERIPH_GPIOF
+#define RED_TIMER_PERIPH        SYSCTL_PERIPH_TIMER0
+#define BLUE_GPIO_PERIPH        SYSCTL_PERIPH_GPIOF
+#define BLUE_TIMER_PERIPH       SYSCTL_PERIPH_TIMER1
+#define GREEN_GPIO_PERIPH       SYSCTL_PERIPH_GPIOF
+#define GREEN_TIMER_PERIPH      SYSCTL_PERIPH_TIMER1
+
+
+#define RED_GPIO_BASE           GPIO_PORTF_BASE
+#define RED_TIMER_BASE          TIMER0_BASE
+#define BLUE_GPIO_BASE          GPIO_PORTF_BASE
+#define BLUE_TIMER_BASE         TIMER1_BASE
+#define GREEN_GPIO_BASE         GPIO_PORTF_BASE
+#define GREEN_TIMER_BASE        TIMER1_BASE
+
+#define RED_GPIO_PIN            GPIO_PIN_1
+#define BLUE_GPIO_PIN           GPIO_PIN_2
+#define GREEN_GPIO_PIN          GPIO_PIN_3
+
+
+#define RED_GPIO_PIN_CFG        GPIO_PF1_T0CCP1
+#define BLUE_GPIO_PIN_CFG       GPIO_PF2_T1CCP0
+#define GREEN_GPIO_PIN_CFG      GPIO_PF3_T1CCP1
+
+#define RED_TIMER_CFG           TIMER_CFG_B_PWM
+#define BLUE_TIMER_CFG          TIMER_CFG_A_PWM
+#define GREEN_TIMER_CFG         TIMER_CFG_B_PWM
+
+#define RED_TIMER               TIMER_B
+#define BLUE_TIMER              TIMER_A
+#define GREEN_TIMER             TIMER_B
+
+
+//*****************************************************************************
+//
+// Useful macros 
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Functions exported from rgb.c
+//
+//*****************************************************************************
+extern void RGBInit(unsigned long ulEnable);
+
+extern void RGBEnable(void);
+extern void RGBDisable(void);
+extern void RGBSet(volatile unsigned long * pulRGBColor, float fIntensity);
+extern void RGBColorSet(volatile unsigned long * pulRGBColor);
+
+extern void RGBIntensitySet(float fIntensity);
+
+extern void RGBGet(unsigned long * pulRGBColor, float * pfIntensity);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+//*****************************************************************************
+//
+// Prototypes for the globals exported by this driver.
+//
+//*****************************************************************************
+
+#endif // __RGBLED_H__
-- 
cgit v1.3.1